Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The technological process of ready-mixed concrete production, which is designed to ensure the quality of concrete and the durability of the constructed buildings in accordance with the European Standard EN 206, consists of several stages. In this standard, to ensure the stability of both the concrete production process itself and its individual stages, appropriate requirements have been formulated. Some of these requirements pertain to the on-line stage of the production process, and some to the off-line stage. Some of these requirements, if not properly controlled, can disrupt the stability of the production process and also negatively impact the quality and durability of concrete structures. The article analyzes the significance of these standard requirements. For this purpose, the AHP method was used, and the Pareto principle was applied to interpret the results. The AHP analysis showed that three out of seven requirements have the most significant impact on the quality of concrete and concrete structures. These are: the constituents of concrete, the limitations for concrete composition, and the delivery of fresh concrete. The applied Pareto principle confirmed their dominant role. These three criteria account for almost 80% of the importance in ensuring the quality of concrete.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
104--115
Opis fizyczny
Bibliogr. 50 poz., rys., tab., wykr.
Twórcy
autor
- Faculty of Civil and Environmental Engineering and Architecture, Rzeszow University of Technology, Poland
autor
- Faculty of Civil Engineering, Krakow University of Technology, Poland
autor
- Faculty of Civil Engineering, Silesian University of Technology, Poland
autor
- Department of Civil Engineering, Polytechnic of Coimbra, Portugal
Bibliografia
- 1. ACI Committee 318, 2017. Guide to Placing Concrete by Pumping Methods, ACI 304.2R-17, American Concrete Institute.
- 2. ACI Committee 318, 2020. Building Code Requirements for Structural Concrete ACI CODE-318-19, American Concrete Institute.
- 3. Adamczyk, M, Zdeb, M and Tracz, T 2023. Physico-Chemical Properties of Sewage Sludge Ash and Its Influence on the Chemical Shrinkage of Cement Pastes. Materials Proceedings 13(1), 26.
- 4. Bentz, D.P 2007. A Review of Early-Age Properties of Cement-Based Materials. Cement and Concrete Research 38(2), 196-204.
- 5. Brunarski, L 2009. Podstawy matematyczne kształtowania kryteriów zgodności wytrzymałości materiałów, Warszawa, Polska, Wydawnictwo ITB. (in polish).
- 6. Casspeele, R and Taerwe, L 2008. Conformity Control of Concrete Based on the “Concrete Family” Concept. Beton Stahlbetonbau 103, 50-56.
- 7. Czarnecki, L 2004. Beton według normy PN-EN 206-1 – komentarz, Kraków, Polska, Polski Cement, (in polish).
- 8. Darko, A, Chan, APC, Ameyaw, EE, Owusu, EK, Pärn, E and Edwards, D 2019. Review of application of analytic hierarchy process (AHP) in construction. International journal of construction management 19(5), 436-452.
- 9. Domagała, L and Sieja, K 2023. Effect of Moisture Condition of Structural Lightweight Concretes on Specified Values of Static and Dynamic Modulus of Elasticity. Materials 16(12), 4299.
- 10. Downarowicz, O (2000). Zastosowanie metody AHP do oceny i sterowania poziomem bezpieczeństwa złożonego obiektu technicznego. W: Downarowicz, O, Krause, J, Sikorski, M and Stachowski. W: Wybrane metody ergonomii i nauki o eksploatacji. Gdańsk, Polska, Wydaw. Politechniki Gdańskiej (in polish).
- 11. Drobiec, Ł, Jasiński, R and Piekarczyk, A 2010. Diagnostyka konstrukcji żelbetowych, Warszawa, Polska, PWN (in polish).
- 12. Drobiec, Ł, and Jasiński, R 2023. Construction and Building Materials: Masonry Structures and Reinforced Concrete Structures. Materials 16(15), 5351.
- 13. EN 206:2013+A1:2016 - Concrete - Specification, performance, production and conformity.
- 14. Flower, DJ and Sanjayan, JG 2007. Greenhouse gas emissions due to concrete manufacture. The international Journal of life cycle assessment 12, 282-288.
- 15. Horszczaruk, E and Łukowski, P 2023. The Influence of the Ageing Process on the Mechanical Properties of Cement Mortars with Nano-SiO2 Admixture Initially Subjected to Thermal Treatment. Materials Proceedings 13(1), 20.
- 16. Jasiński, R, Drobiec, Ł and Piekarczyk, A 2010. Kontrola robót betonowych i żelbetowych w trakcie ich realizacji i odbioru. Warszawa, Polska, Wolters Kluwer (in polish).
- 17. Jaworska, B, Stańczak, D and Łukowski, P 2024, The Influence of Waste Perlite Powder on Selected Mechanical Properties of Polymer–Cement Composites. Buildings 14(1), 181.
- 18. Kaczmarczyk, GP, Wałach, D, Natividade-Jesus, E and Ferreira, R 2022. Change of the Structural Properties of High-Performance Concretes Subjected to Thermal Effects. Materials, 15(16), 5753.
- 19. Kafel, K, Leśniak, A and Zima, K 2019. Multicriteria comparative analysis of pillars strengthening of the historic building. Open Engineering 9(1), 18-25.
- 20. Kokoszka, W 2019. Impact of Water Quality on Concrete Mix and Hardened Concrete Parameters. Civil and Environmental Engineering Reports 29(3), 174-182.
- 21. Kurowska, A and Nowogońska, B 2023. Influence of the Decision to Select Renovated Elements in a Heritage Building on Further Stages of the Aging Process of the Building - A Case Study. Sustainability 15(24), 16926.
- 22. Leśniak, A, Kubek, D, Plebankiewicz, E, Zima, K and Belniak, S 2018. Fuzzy AHP application for supporting contractors’ bidding decision. Symmetry, 10(11), 642.
- 23. Liu, Y, Jian, Chen, S, Sagoe-Crentsil, K and Duan, W 2021. Digital concrete modelling: An alternative approach to microstructural pore analysis of cement hydrates. Construction and Building Materials 303, 124558.
- 24. Łukowski, P 2016. Modyfikacja materiałowa betonu. Warszawa, Poland, Stowarzyszenie Producentów Cementu (in polish).
- 25. Marcarelli, G and Squillante, M 2020. A group-AHP-based approach for selecting the best public tender. Soft Computing 24(18), 13717-13724.
- 26. Mindess, S, Young, F and Darwin, D 2003. Concrete 2nd edition. Upper Saddle River: Prentice- Hall.
- 27. Mrówczyńska, M, Skiba, M, Leśniak, A, Bazan-Krzywoszańska, A, Janowiec, F, Sztubecka, M and Kazak, JK 2022. A new fuzzy model of multi-criteria decision support based on Bayesian networks for the urban areas' decarbonization planning. Energy Conversion and Management 268, 116035.
- 28. Müller, C 2012. Use of cement in concrete according to European standard EN 206-1. HBRC Journal 8(1), 1-7.
- 29. Narloch, PL, Woyciechowski P and Jęda P 2015. The influence of loam type and cement content of the compressive strength of rammed earth. Archives of Civil Engineering 61(1), 73-88.
- 30. Neville, AM 2011. Properties of Concrete, 5th edition, Essex: Pearson.
- 31. Nicał, A 2021. Optimizing transportation in the precast concrete plants. Arabian Journal of Geosciences 14, 861.
- 32. Nowogońska, B and Mielczarek, M 2021. Renovation management method in neglected buildings. Sustainability 13(2), 929.
- 33. Okamura, H and Ouchi, M 2003. Self-compacting concrete. Journal of advanced concrete technology 1(1), 5-15.
- 34. Ramachandran, VS 1995. Concrete Admixture Handbook, New Jersey, USA, Noyes Publication.
- 35. Reddy Babu, G, Madhusudana Reddy, B and Venkata Ramana, N 2018. Quality of mixing water in cement concrete “a review”. Journal Materials Today: Proceedings 5(1), 1313-1320.
- 36. Różycki, M, Hager, I, Zdeb, T, Sitarz, M, Mróz, K, Zdeb, J and Smorońska, N 2023. Mechanical Properties and Water Permeability of Textile-Reinforced Reactive Powder Concrete with Lightweight Aggregate. Materials 16(24), 7619.
- 37. Saaty, TL 1980. The analytic hierarchy process (AHP) for decision making, Kobe, Japan 1, 69.
- 38. Saaty, TL 1990. How to make a decision: the analytic hierarchy process. European journal of operational research 48(1), 9-26.
- 39. Saaty, TL 1994. How to make a decision: the analytic hierarchy process,. Interfaces 24(6), 19-43.
- 40. Saaty, TL 2005. Theory and applications of the analytic network process: decision making with benefits, opportunities, costs, and risks, Chalfont St Peter, UK: RWS.
- 41. Sizirici, B, Fseha, Y, Cho, C-S, Yildiz, I and Byon, Y-J 2021. A Review of Carbon Footprint Reduction in Construction Industry, from Design to Operation. Materials 14(20), 6094.
- 42. Skiba, M, Mrówczyńska, M, Szubecka, M, Bazan-Krzywoszańska, A, Kazak, JK, Leśniak, A and Janowiec, F 2021. Probability estimation of the city’s energy efficiency improvement as a result of using the phase change materials in heating networks. Energy 228, 120549.
- 43. Skrzypczak, I and Woliński, S 2007. Influence of Distribution Type on the Probability of Acceptance of Concrete Strength. Archives of Civil Engineering 53(3), 479-495.
- 44. Skrzypczak, I, Leśniak, A, Ochab, P, Górka, M and Kokoszka, W 2021. Interlaboratory Comparative Tests in Ready-Mixed Concrete Quality Assessment. Materials 14(13), 3475.
- 45. Špak, M, Mandičák, T, Spišáková, M and Verčimák, D 2023. Risk Management on Concrete Structures as a Tool for the Control of Construction Efficiency. Sustainability 15(12), 9577.
- 46. Stańczak, D, Kuziak, J, Woyciechowski, P and Czarnecki L 2020. Experimental verification of carbonation models used for estimation of reinforced concrete structures durability. Bulletin of the Polish Academy of Sciences: Technical Sciences 68(5), 1159-1166.
- 47. Taerwe, L 1988. Evaluation of Compound Compliance Criteria for Concrete Strength. Materials and Structures 21(1), 13-20.
- 48. Wałach, D 2020. Analysis of factors affecting the environmental impact of concrete structures. Sustainability 13(1), 204.
- 49. Woyciechowski, P and Kalinowski, M 2018. The influence of dosing method and material characteristics of superabsorbent polymers (SAP) on the effectiveness of the concrete internal curing. Materials 11, 1600.
- 50. Zhaka, V, Nilimaa, J 2023. An Overview of Smart Materials and Technologies for Concrete Construction in Cold Weather. Eng 4(2), 1550-1580.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-b03c9926-a205-4a6e-a257-d74c0b68298c