Utilization of terrestrial laser scanner Leica scanstation for stocktaking measurements on an example of a spherical dome

• Autorzy: Hejbudzka K. , Kamiński W.
• Języki publikacji: EN

Abstrakty

EN

The work presents results of using the technology of terrestrial laser scanning in stocktaking measurements of spherical domes. The parameter subject to special evaluation is the value of the dome's diameter set on primary Ievel, which is compared with the theoretical value obtained from the technical project of the object. The measurements in several variants were made with the use of Leica ScanStation laser scanner bought by the Geodesy Institute. In office works the original manufacturer's programme (Cyclone v. 5.6) was used. The programme enables modeling the obtained observation results and making basic measurements, such as, among other, measuring the value of the diameter on the cross-section subject to the analysis. The results obtained with the use of laser scanning encourage to further detailed theoretically-empirical analysis.

Słowa kluczowe

EN

terrestrial laser scanner; spherical dome; modeling

PL

naziemny skaner laserowy; kopuły sferyczne; modelowanie

• Wydawca: Wydział Geodezji i Kartografii Politechniki Warszawskiej
• Czasopismo: Reports on Geodesy
• Rocznik: 2009
• Tom: z. 2/87
• Strony: 145--152
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Hejbudzka K.

autor

Kamiński W.

• The University of Warmia and Mazury in Olsztyn, Geodesy Institute

Bibliografia

• [1] Czaja J. Geodezja inżynieryjno - przemysłowa. Zbiór zadań i przykładów. Kraków, 1992.
• [2] Elkhrachy I., Niemeier W. Optymalization and strength aspects geo-referencing data with terrestrial laser scanner systems. 3rd IAG/12th FIG Symposium, Baden, May 22-24, 2006.
• [3] Gosliga van R., Lindenbergh R., Pfeifer N. Deformation analysis of a bored tunnel by means of terrestrial laser scanning. IAPRS Volume XXXVI, Part 5, Dresden 25-27 September 2006.
• [4] Hejbudzka K., Witkowski K. Pomiar i ocena geometrycznego kształtu pokrycia dachowego w kształcie kopuły z wykorzystaniem aproksymacji powierzchni drugiego stopnia. Praca dyplomowa - magisterska. Olsztyn 2007.
• [5] Ioannidis C., Valani A., Georgopoulos A., Tsiligiris E. 3D model generation for deformation analysis using laser scanning data of a cooling tower. 3rd IAG/12th FIG Symposium, Baden, May 22-24, 2006.