PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Synchronous measurement of position coordinates of two GPS receivers

Treść / Zawartość
Identyfikatory
Warianty tytułu
Konferencja
Geodetic and Geodynamic Programmes of the CEI (Central European Initiative) / Procedings of the EGU G10 Symposium (13-15. 04. 2008; Vienna, Austria)
Języki publikacji
EN
Abstrakty
EN
This article presents the results of synchronous DGPS measurements. The measurements involved two identical receivers with the same software, installed permanently at a fixed distance between each other, in conditions eliminating multipath signal reception. The results analysis, however, shows that the compatibility of received satellite configurations ranges significantly.
Słowa kluczowe
EN
PL
pomiary   DGPS  
Czasopismo
Rocznik
Tom
Strony
99--104
Opis fizyczny
Bibliogr. 7 poz., tab., wykr.
Twórcy
autor
autor
autor
  • Gdynia Maritime University (Poland)
Bibliografia
  • 1. Banachowicz A., Bober R., Banachowicz C, Wolski A., (2005) Spadal Accuracy of GPS/DGPS Position in a Fairway, Reports on Geodesy No. 2 (73), Warsaw.
  • 2. Januszewski J., (2004) GPS and other satellite systems in marine navigation (in Polish), Akademia Morska, Gdynia.
  • 3. Felski A., Specht C, (1995) Some aspects of optimized use of DGPS systems in the Southern Baltic Sea (in Polish), Zeszyty Naukowe AMW No. 3, Gdynia.
  • 4. Specht C, (1997) Polish DGPS systems as an element of radionavigational shield ofthe southern Baltic (in Polish), Zeszyty Naukowe AMW No. 2, Gdynia.
  • 5. Specht C, (2007) System GPS, Wyd. Bernardinum, Gdańsk.
  • 6. Wolski A., Bober R. Szewczuk T., (2007) An effect of urban development on the accuracy of the GPS/EGNOS system, TransNav 2007, Gdynia.
  • 7. Zaleski J., (2006) Dokładność określania pozycji przy wykorzystaniu różnych stacji DGPS, supervisor mgr inż. R. Bober, engineer's thesis, Akademia Morska w Szczecinie.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-PWAB-0002-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.