Protective capability of modified Al2O3 ceramic plater

• Autorzy: Dziubak C. , Modrzewski J. , Wiśniewski A.
• Języki publikacji: EN

Abstrakty

EN

Below we would like to present the results of applied technological process of obtaining small and large high-strength Al2O3 ceramic plates. The small-sized and large-sized one-layered plates and one-layered and double-layered small-sized plates produced this way were fired with amour-piercing B-32 type 12.7 mm bullets. Additionally, small-sized one-layered Al2O3, Al2O3 + spinel and multilayered ceramic plates were tested under the same conditions.

Słowa kluczowe

EN

floor tiles

PL

płytki ceramiczne

• Wydawca: Wojskowy Instytut Techniczny Uzbrojenia
• Czasopismo: Problemy Techniki Uzbrojenia
• Rocznik: 2007
• Tom: R. 36, z. 103
• Strony: 15--23
• Opis fizyczny: Bibliogr. 4 poz., rys., tab., wykr.

Twórcy

autor

Dziubak C.

autor

Modrzewski J.

autor

Wiśniewski A.

• Glass and Ceramics Institute

Bibliografia

• [1] Modrzewski J., Dziubak C., Wiśniewski A.: The bases of manufacturing technology of composite armours for light vehicles and different levels of their protection. Research Project of MNiSW No. 0940/T08, 2005.
• [2] Fett T., Munz.A.: Subcritical Crack Growth of Macrocracks in Alumina with R-Curve Behavior. J. Am. Ceram. Soc. 75, 1992, pp. 958÷965.
• [3] Boniecki M., Librant Z., Tomaszewski H., Rećko W. M.: The work of fracture of corundum and zirconium ceramics and corundum and zirconium composites. Electronic Materials, Vol. 26, (1998), 2, pp. 5÷17.
• [4] Librant Z.: The research of influence of atmosphere at high temperature on Vickers’ hardness and on the modification of fracture toughness of materials. Research Project of MNiSW No. 7 T08D 018 08, 2000.