PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The concept of a new approximate relation for exchanger heat transfer effectiveness for a cross-flow heat exchanger with unmixed fluids

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper presents an approximate relation for the heat transfer effectiveness for a counter-flow heat exchanger, which was compared with the exact solution. Based on the obtained approximate relation for a counter-flow heat exchanger the approximate heat transfer effectiveness for a cross-flow heat exchanger in which both fluids do not mix is proposed. This approximate exchanger heat transfer effectiveness was compared with the exact solution proposed by Mason, the most well-known relation. A comparison between the most frequently used approximate formula and the exact solution proposed by Mason was made, too. The exchanger heat transfer effectiveness was analyzed for the ratio of the heat capacity rate of fluids C in the range from 0 to 1 and the number of transfer units NTU from the most common range 0-5.
Rocznik
Strony
93--101
Opis fizyczny
Bibliogr. 15 poz., rys., wykr.
Twórcy
autor
  • Institute of Heat Engineering, Warsaw University of Technology, 21/25 Nowowiejska Street, 00-665 Warsaw, Poland, rlask@gmail.com
Bibliografia
  • [1] W. Nusselt, Der Wärmeübergang im Kreuzstrom, Zeitschrift des Vereines Deutscher Ingenieure 55 (1911) pp. 2021-2024.
  • [2] W. Nusselt, Eine neue Formel für den Wärmedurchgang im Kreuzstrom, Technische Mechanik und Thermodynamik 1 (1930) pp. 417-422.
  • [3] H. A. Navarro, L. Cabezas-Gomez, A new approach for thermal performance calculation of cross-flow heat exchangers, International Journal of Heat and Mass Transfer 48 (2005) pp. 3880-3888.
  • [4] D. M. Smith, Mean temperature-difference in cross flow, Engineering 138 (1934) pp. 479-481 and 606-607.
  • [5] J. L. Mason, Heat transfer in cross-flow, Proceedings of the Second U.S. National Congress of Applied Mechanics, American Society of Mechanical Engineers (1955) pp. 801-803.
  • [6] A. M. Binnie, E. G. C. Poole, The theory of the single-pass cross-flow heat interchanger, Proceedings of the Cambridge Philosophical Society 33 (1937) pp. 403-411.
  • [7] B. S. Baclic, A simplified formula for cross-flow heat exchanger effectiveness, Trans. Am. Soc. Mech. Engrs, Journal of Heat Transfer 100 (1978) pp. 746-747.
  • [8] A. C. Yunus, Heat transfer, McGraw-Hill, 2003.
  • [9] W. M. Kays, A. L. London, Compact Heat Exchangers, McGraw-Hill, 1984.
  • [10] F. P. Incropera, D. P. Dewitt, T. L. Bergman, A. S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons Inc, 2006.
  • [11] M. A. Digiovanni, R. L. Webb, Uncertainty in effectiveness-NTU calculations for cross-flow heat exchangers, Heat Transfer Engineering 10 (1989) pp. 61-70.
  • [12] A. Triboix, Exact and approximate formulas for cross flow heat exchangers with unmixed fluids, International Communications in Heat and Mass Transfer I 36 (2009) pp. 121-124.
  • [13] E. Kostowski, Heat Transfer (in Polish), WPŚ Gliwice, 2000.
  • [14] J. Szargut, Thermodynamics (in Polish), PWN Warszawa, 1974.
  • [15] T. S. Wiśniewski, Heat Transfer (in Polish), WNT Warszawa, 1997.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-PWA9-0051-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.