Joining of steel sheets for automotive industry using press joining method

• Autorzy: Kascak L. , Spisak E. , Mucha J.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with joining of steel sheets for automotive industry using press joining method. This method is a relatively new technique of car body sheets joining which is beginning to find its place in the automotive industry as an alternative to resistance spot welding, especially in joining materials of different qualities. Combination of two hot-dip galvanized steel sheets: microalloyed steel sheet H220PD of the thickness 0,8 mm and TRIP steel 40/70+Z100MBO of the thickness 0,77 mm were used for the experiments. The tensile test and metalographical analysis were used for evaluation of the press joints properties. The influence of the sheet's position in press joining of used materials on carrying capacity considering the active parts of the tool - punch and die was observed.

Słowa kluczowe

EN

automotive industry; steel sheet; joint assembly; press joining method

PL

przemysł motoryzacyjny; cienka blacha stalowa; montaż połączenia

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2010
• Tom: z. 80 [274]
• Strony: 121--126
• Opis fizyczny: Bibliogr. 5 poz., tab., rys.

Twórcy

autor

Kascak L.

autor

Spisak E.

autor

Mucha J.

• Technical University of Košice, Slovak Republic

Bibliografia

• 1. Kaščák, L’., Spišák E.: Tlakové spájanie ocel’ových plechov pre automobilový priemysel. PRO-TECH-MA 2005, Progressive Technologies and Materials, Rzeszów - Bezmiechowa 2005, s. 76-81.
• 2. Spišák E., Kaščák L’.: Spajanie ocel’ových plechov v automobilovom priemysle. In: MAT/TECH automobilového priemyslu 2005. s. 97-102.
• 3. Kaščák C.: Nové metódy tlakového spájania materiálov. Transfer inovácií, 8/2005, s. 99-100.
• 4. Mucha J.: The influence of shape of tool die and blank holder on effect of deformation joint elements and rivetion load values. In: Acta Mechanica Slovaca, 3-A/2008, s. 279-286.
• 5. Nong N., Keju O., Yu Z., Zhiyuan Q., Changcheng T. and Feipeng L.: Research on press joining technology for automotive metallic sheets. Journal of Materials Processing Technology, 137 (2003), p. 159-163.