Improving surface finish quality of FDM prototypes

• Autorzy: Gajdos I. , Slota J.
• Języki publikacji: EN

Abstrakty

EN

Rapid prototyping technologies decrease production time and costs in engineering industry but also in other industries. One of most widely used technology FDM suffers under low surface finish quality. This paper is aimed on research of surface finishing technologies applicable to improve the quality of FDM prototypes surface finish. Pretreated samples were blasted with sodium bicarbonate and glass beads. The values of Ra and Rz were measured on the samples and compared the impact of selected blasting medium and blasting conditions on surface finish quality of FDM prototypes.

Słowa kluczowe

EN

surface finish; finishing; surface quality; FDM prototypes; fused deposition modeling; rapid prototyping

PL

obróbka powierzchni; obróbka wykończająca; jakość powierzchni; osadzanie topionego materiału; szybkie prototypowanie

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2010
• Tom: z. 80 [274]
• Strony: 87--90
• Opis fizyczny: Bibliogr. 3 poz., rys., wykr.

Twórcy

autor

Gajdos I.

autor

Slota J.

• Technical University Košice, Slovakia

Bibliografia

• 1. Ippolito R., Iuliano L., Gatto A.: Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish. Annals of the CIRP 44(1): 157-160, 1995.
• 2. Armillotta A.: Assessment of Surface Quality on Textured FDM Prototypes. Rapid Prototyping Journal 12(1): 35-41 2006.
• 3. Janecki D., Stępień K., Adamczak S.: Calculation of reference surface parameters for elements whose generatrix is a fragment of a circle. XIX IMEKO World Congress, Fundamental and Applied Metrology, September 6-11, 2009, Lizbona, Portugalia.