Complex approach to the reverse engineering techniques

• Autorzy: Gajdos I. , Kat'uch P.
• Języki publikacji: EN

Abstrakty

EN

This paper describes possibilities of integration newest technologies in reverse engineering process. The integration of computer tomography and FDM rapid prototyping technology allows to reproduce plastic parts without any documentation (blueprints, CAD model...) in very short cycles lasting few hours. Even complex shaped parts, with difficult geometry become no problem for combination of these two technologies, where the conventional approach in reverse engineering would last weeks if ever possible. On experimental part with complex geometry was presented modern complex approach in reverse engineering including measuring and digitalizing of part, data preparation for printing, printing and finishing of new part. Computer tomography was also used to compare shape and dimensions of original and reproduced part.

Słowa kluczowe

EN

reverse engineering; computer tomography; fused deposition modeling; FDM prototypes; rapid prototyping

PL

inżynieria odwrotna; tomografia komputerowa; osadzanie topionego materiału; szybkie prototypowanie

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2010
• Tom: z. 80 [274]
• Strony: 81--86
• Opis fizyczny: Bibliogr. 3 poz., rys.

Twórcy

autor

Gajdos I.

autor

Kat'uch P.

• Technical University Košice, Slovakia

Bibliografia

• 1. Janecki D., Stępień K., Adamczak S.: Calculation of reference surface parameters for elements whose generatrix is a fragment of a circle. XIX IMEKO World Congress, Fundamental and Applied Metrology, September 6-11, 2009, Lisbon, Portugal.
• 2. Kat’uch P., Živčák J., Dovica M., Kováč J., Kelemenová T.: Počitačová tomografie pro přesné měření, defektoskopii i reverzní inženýrství, ItCad 6/2009.
• 3. Gajdoš, I., Słota, J., Spišák, E.: Visualisation of FDM prototypes. Proceedings of ICAT 2008: 2nd International Conference on Additive Technologies: DAAAM Specialized Conference, Ptuj, Slovenia.