The application of rapid prototyping, CAE and CAM methods in product development processes

• Autorzy: Slota J. , Gajdos I.
• Konferencja: Mechanics 2008 / International Scientific Conference (VI; 2008; Rzeszow, Poland)
• Języki publikacji: EN

Abstrakty

EN

In order to shorten manufacturing time for new products and their moulds, the use and the development of modern techniques are critical. One of such technologies is the rapid prototyping method, which enables to designers and customers to see the physical presentation of a new product. Application of the CAE methods is accentuated in the development phase of the product, which redounds to cost reducing on tools and moulds development. The paper deals with several steps in prototype development, the application of computer simulation by means of CAE system Moldflow MPI in mould development for mold plastic part and utilization of CAM system for NC programming of the mould manufacturing.

Słowa kluczowe

EN

production process; production development; rapid prototyping; CAD/CAM; computer-aided design; computer aided manufacturing; CAE; computer-aided engineering

PL

proces produkcyjny; rozwój produkcji; szybkie prototypowanie; CAD/CAM; projektowanie wspomagane komputerowo; wytwarzanie wspomagane komputerowo; CAE; modelowanie wspomagane komputerowo

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2008
• Tom: z. 73 [253]
• Strony: 251--256
• Opis fizyczny: Bibliogr. 7 poz., tab., rys.

Twórcy

autor

Slota J.

autor

Gajdos I.

• Technical University of Kosice, Slovakia

Bibliografia

• 1. Lee B.H.,Kim B.H.: Polym-Plast Technol. Eng. 34(1995), 793-811.
• 2. Pandelidis I., Zou Q.: Polym. Eng. Sci. 30 (1990), 873-882.
• 3. Pandelidis I., Zou Q.: Polym. Eng. Sci. 30 (1990), 883-892.
• 4. Tumg L.S., Chiang H.H., Stevenson J.F.: SPE Tech. Pap., 1 (1995), 668-672.
• 5. Seow L.W., Lam Y.C.: J. Mat. Proc. Tech., 72 (1997), 333-341.
• 6. Lautenbach S., Wang K.X., Chiang H.H., Jonh W.R.: In: Proceedings of the SPE Annual Technical Conference, ANTEC'91, 1991, pp. 372-376.
• 7. Jansen K.M.B., Van Dijk D.L., Burgers E.V.: Int. Polym. Process 13 (1) (1998), pp. 99-104.