Functional importance of surface topography parameters

• Autorzy: Pawlus P. , Dzierwa A.
• Konferencja: Mechanics 2008 / International Scientific Conference (VI; 2008; Rzeszow, Poland)
• Języki publikacji: EN

Abstrakty

EN

The paper presents the review of research investigations concerning functional importance of different surface topography parameters. The results of own investigations are also taken into consideration. Four groups of parameters were analysed: amplitude, spatial, hybrid and connected with material ratio curve.

Słowa kluczowe

EN

manufacturing industry; surface topography; surface deformation

PL

przemysł wytwórczy; topografia powierzchni; odkształcenie powierzchni

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2008
• Tom: z. 73 [253]
• Strony: 229--237
• Opis fizyczny: Bibliogr. 38 poz., rys., wykr.

Twórcy

autor

Pawlus P.

autor

Dzierwa A.

• Rzeszow University of Technology, Poland

Bibliografia

• 1. Whitehouse D.J.: Function maps and the rule at surfaces. International Journal of Machine Tools and Manufacture, 41/2001, 1847-1861.
• 2. Liskiewicz T., T. Mathia, S. Fouvry, A Neville: Systematic approach for morphological analysis of worn surfaces. Tribotest 2007, 13, 139-150.
• 3. Greenwood J.A., J.B.P. Wiliamson: Contact of nominally flat surfaces, Proc. Roy. Soc., 295 A, 1966, 300-316.
• 4. Thomas T.R.: Rough Surfaces. Imperial College Press, London 1999.
• 5. Ludema K.C.: Friction, wear, lubrication. A textbook in tribology. CRC Press, 1996.
• 6. Whitehouse D.J.: Handbook of surface metrology. Institute of Physics Publishing. Bristol and Philadelphia, 1994.
• 7. Pawlus P.: The effect of cylinder surface topography an the selected functional properties of multi-cylinder internal combustion engine. PhD thesis, Rzeszow University of Technology. Rzeszow 1993 (in Polish).
• 8. Roylance B.J., C.H. Bovington, G. Wang, A Hubbard: Running-in wear behaviours of valve train system. W: Vehicle Tribology, (Editors) D. Dowson, C.M. Taylor, M. Godet, Tribology series 18, l99l, 143-147.
• 9. Krzyzak Z., Pawlus P.: Zero-wear' of piston skirt surface topography. Elsevier, Wear 260, 2006, 554-561.
• 10. Jeng Y.-R., Z.-W. Lin, S.-H. Shyu: A microscopic wear measurement method for general surfaces. ASME J. of Tribology, 124, 2002, 829-833.
• 11. Pawlus P.: A method of measuring "zero-war" of the cylinder liner. Tribotest Journal, 5/1, 1998, 53-70.
• 12. Patir N., H.S. Cheng: An average flow model for determining effects of threedimensional roughness on partial hydrodynamic lubrication. Trans. ASME 100, 1978, 12-17.
• 13. Tonder K.: Effects of skew unidirectional straight roughness on hydrodynamic lubrication. ASME J. of Tribology, 109, 1987, 671-678.
• 14. Hirst W., A.E. Hollander: Surface finish and damage in sliding. Proc. R. Soc. Lond., A 337, 1974, 379-394.
• 15. Wu C., L. Zheng: Effect of waviness and roughness on lubricated wear related to running-in. Wear 147, 1991, 323-334.
• 16. Whitehouse D.J., J.F. Archard: The properties of random surface of significance in their contact. Proc. R. Soc., A316, 1970, 97-121.
• 17. Zahouani H., M. Assoul, R. Vargiolu, T. Mathia: The morphological tree transform of surface motifs. Incidence in Tribology. Transactions of 8th International Conference on Metrology and Properties of Engineering Surfaces, Huddersfield, United Kingdom, 2000, 95-108.
• 18. Greenwood J.A.: Contact pressure fluctuations. Proc. Instn. Mech. Engrs., 210, 1996, 210, 281-281.
• 19. Tabor D.: A simplified account of surface topography and the contact between solids. Wear 32, 1975, 269-271.
• 20. Childs T.H.: Dry and boundary lubricated sliding friction and wear for engine component materials. In: Engine Tribology (C.M.Taylor-Editor), 1993, 51-74.
• 21. Nielsen H.S.: New approaches to surface roughness evaluation of special surfaces. Precision Engineering 10, 1988, 209-213.
• 22. Malburg M.C., M.D. Grant. The characterization of two-process surface texture using the cumulative Gaussian probability distribution. ISO Paper, 1992.
• 23. Mathia T.G., H. Zahouani, W. Rakowski, J.M. Schissle: Analysis of cylinder bores-relationship between metallurgical structure, manufacture and wear characterisation. Proceedings of Congress "EUROTRIB'93" 1993, 311-316
• 24. Yu A., A.S. Polycarpou: Contact of rough surfaces with asymmetric distribution of asperity heights. ASME Journal of Tribology, 124, 2002, 367-376.
• 25. Jeng Y.: Impact of plateaued surfaces on tribological performance. Tribology Transactions, 39/2, 1996, 354-361.
• 26. Santochi M., M. Vignale: A study on the functional properties of a honed surface. CIRP Annals, 31, 1982, 431-434.
• 27. Bigerelle M., A. Iost: A numerical method to calculation the Abbott parameters: a wear application. Tribology International, available online.
• 28. Codgel J.D: A convolved multi-Gaussian probability distribution for surface topography application. Precision Engineering, available online
• 29. Johansson S., R. Ohlsson, Z. Dimkovski, B.-G. Rosen: Manufacturing mechanisms of cylinder liner surface roughness. 11th International Conference on Metrology and Properties of Engineering Surfaces. Huddersfield, UK, 2007, 376.
• 30. Pawlus P.: A study of the dependence of the functional properties of the cylinder liner surface layer on the operating conditions. Proceedings of the Institution of Mechanical Engineers, 210, part J, 1996, 17-27.
• 31. Pawlus P.: Characterization of low wear of engine parts. Finnish Journal of Tribology "Tribologia", 26/2, 2007, 10-23.
• 32. Brinkman S., H. Bodschwinna: Characterisation of automotive bore performance using 3D surface metrology. In L. Blunt, X. Jiang (eds): Assessment surface topography. Kogan Page Science, London and Sterling 2003, 307-347.
• 33. Daskivich R.A.: Bearing length ratio applied to the measurement of engine cylinder-bore wear. Precision Engineering, 6, 1984, 31-33.
• 34. Kumar R., S. Kumar, B. Prakash, A. Sethuramiah: Assessment of engine line wear from bearing area curves. Wear 239, 2000, 282-286.
• 35. Rosen B.-G., R. Ohlsson, T.R. Thomas: Tribological implications of AFM measurements of cylinder bore microtopography. Proceedings of the Conference on Atomic Scale Control of Surfaces and Interfaces, Brighton, 1994.
• 36. Gałda L., Pawlus P., Dzierwa A.: Wear proces of textured ring examined by measurement of surface topography. Materiały XII International Colloquium on Surfaces. Chemnitz (Niemcy) 2008, pp. 78-87.
• 37. King T.G., W. Watson, K.J. Stout: Modelling the micro-geometry of lubricated wear. In: Proceedings of the 4th Leeds-Lyon Symposium on Tribology. London, MEP, 1978, 333-343.
• 38. Pawlus P., W. Graboń: Truncation parameters and local linear wear estimation from worn surface profile. "Proceeding of 11th International Conference "Metrology and Properties of Engineering Surfaces", Huddersfield, 2007, 329-334.