Forming limit diagram of zinc coated steel sheets

• Autorzy: Stachowicz F.
• Konferencja: Mechanics 2006 / International Scientific Conference (V; 2006; Rzeszow, Poland)
• Języki publikacji: EN

Abstrakty

EN

Forming limit curves of deep drawing steel sheets have been determined experimentally and calculated on the base of the material tensile properties folIowing the Hill, Swift, Marciniak-Kuczyński and Sing-Rao methods. Only the FLC modelled from a singly linear forming limit stress curve exhibits good agreement with experimental curve. It was established that a linearized limit stress locus describes adequately the actual localised neck conditions for the material chosen in this study. The quantitative X-ray microanalysis of the Fe contents in the sheet surface layer composition was used to determine cracking limit curve (CLC) of electro-galvanized steel sheet. The change in zinc layer (and base sheet metal) thickness was used as a criteria in calculation of the CLC.

Słowa kluczowe

EN

steel sheet; zinc layer

PL

cienka blacha stalowa; warstwa cynkowa

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2006
• Tom: z. 68 [231]
• Strony: 207--212
• Opis fizyczny: Bibliogr. 10 poz., tab., wykr.

Twórcy

autor

Stachowicz F.

• Rzeszow University of Technology, Poland

Bibliografia

• 1. Marciniak Z., Kuczyński K.: Int. J. Mech. Sci., 9 (1967) 609.
• 2. Storen S., Rice J.R.: J. Mech. Phys. Solids, 23 (1975) 421.
• 3. Ghosh A.K.: Mechanics of sheet metal forming. edit. D.P. Koistinen and N-M Wang, Plenum Press N. Y. 1978, p. 287 .
• 4. Arrieux R., Bedrin C., Boivin M.: 12th IDDRG Congress, S. Margherita Ligure 1982, p. 205.
• 5. Stoughton T.B., Zhu X.: In. J. Plasticity, 20 (2004) 1463.
• 6. Sing W.G., Rao K.P.: J. Mat. Proc. Technol., 67 (1997) 201.
• 7. Gronostajski J.: J. Mat. Proc. Technol., 53 (1995) 167.
• 8. Jiang H.M., Chen X.P., Wu H., Li C.H.: J. Mat Proc. Technol., 151 (2004) 248.
• 9. Arrigoni G., Sarracino M.: Proc. IDDRG Meet., Amsterdam 1995, Paper 11.1.
• 10. Marciniak Z., Kuczyński K., Pokora T.: Int. J. Mech. Sci., 15 (1973) 789.