Dynamically stable milling tools with integrated cut splitting

• Autorzy: Emmer T. , Schmidt K. , Batt S. , Streubel A.
• Konferencja: Mechanics 2002 / International Scientific Conference (III; 1-3.08.2002; Rzeszów; Poland)
• Języki publikacji: EN

Abstrakty

EN

The principle of the cut-splitting can guarantee an effective cutting even under the difficult conditions of stability. To divide the chip in two or more pieces, the geometric relations of the cutting area of every chip are changed. This change is caused by the cutting forces and therefore by the dynamic behaviors of the whole process. The advancement of the principle of cut-splitting obviously increases the dynamic behavior. In particular, under unstable conditions of machine processing in practice, these new milling tools outclass the ordinary milling heads because of their fewer vibrations and noise.

Słowa kluczowe

EN

machining process; milling tool; cut-splitting

PL

obróbka skrawaniem; frezarka

• Wydawca: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Czasopismo: Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
• Rocznik: 2002
• Tom: z. 58 [193]
• Strony: 73--80
• Opis fizyczny: tab., rys., wykr.

Twórcy

autor

Emmer T.

• Otto-von-Guericke-University Magdeburg, Germany

autor

Schmidt K.

• Otto-von-Guericke-University Magdeburg, Germany

autor

Batt S.

• Otto-von-Guericke-University Magdeburg, Germany

autor

Streubel A.

• Wrcoław University of Technology, Poland