Design of Measurement System and Characteristics Research on the Pulse Current of Composite Insulator

• Autorzy: Shengchang J. , Yuanyuan W.

Warianty tytułu

PL

System pomiarowy do badania prądów wyładowania w izolatorach kompozytowych

• Języki publikacji: EN

Abstrakty

EN

The composite insulators have been widely used on the power transmission lines. The faulty caused by manufacture techniques, quality defect or organic material degradation comes into being more and more. Measuring the composite insulator' corona pulse current flowing through the grounded wire is an excellent way to monitor the faulty insulator strings on ground. In this paper, the measurement system for detecting pulse current of composite insulator are set up. The wideband current transducer, extraction circuit of pulse current and the circuit of reference signal are designed and manufactured. Based on the experimental system set up in the laboratory, the characteristics of corona pulse are studied. The relationship between applied voltage and pulse current characteristics, the frequency and phase angle range of corona pulse are studied profoundly. Such work provides direction for on-line monitoring composite insulators by pulse current method.

PL

W artykule analizowano metody badania defektów izolatorów kompozytowych. Mierzono impulsowy prąd wyładowania przepływający przez uziemiony przewód. Przedstawiono układ pomiarowy tego prądu oraz przedstawiono wyniki eksperymentów. Analizowano związek między przyłożonym napięciem a prądem wyładowania, w tym właściwości częstotliwościowe i fazowe tego prądu.

Słowa kluczowe

EN

composite insulator; pulse current; measurement system; aging condition; electrical technology; electrical power engineering

PL

izolatory kompozytowe; defekty; prąd wyładowania; elektrotechnika; elektroenergetyka

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2011
• Tom: R. 87, nr 12a
• Strony: 133--139
• Opis fizyczny: Bibliogr. 24 poz., il., tabl., wykr.

Twórcy

autor

Shengchang J.

autor

Yuanyuan W.

• State Key Laboratory of Electrical Insulation and Power Equipment, Xi�'an Jiaotong University, Xi�'an, ShannXi, Province, Republic of China,

Bibliografia

• [1] V. Y. Ushakov, "Insulation of high voltage equipment", Springer series , Berlin, Germany, 2004.
• [2] S. M. Gubanski, "Modern outdoor insulation–concern and challenges", IEEE Electr. Insul. Mag., Vol. 21, No. 6, 5-11, 2005.
• [3] M. Amin, M. Akbar, and M. Salman, "Composite insulators and their aging: an overview", Sci In China Series E-Techno Sci, Vol. 50, pp 697–713, 2007.
• [4] M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, and A.A Shayegani, "The dielectric behavior of outdoor high–voltage polymeric insulation due to environmental aging", European Trans. Electr. Power, Vol. 17, pp. 47–59, 2007.
• [5] Chang-Su Huh, Bok-Hee, Youn Sang-Youb Lee, "Degradation in Silicone rubber Used for Outdoor Insulator", Proc. of 6th Int. Conf. on Properties and Applications of Dielectric Materials, China, pp. 367-370, June-2000.
• [6] Farzaneh, M., "Outdoor insulators: overview of in-service experience, inspection practice and future challenges", Electrical Insulation Conference, 2009. EIC 2009. IEEE, Montreal, QC, pp. 542 – 550, May 31, 2009.
• [7] R. S. Gorur, G. G. Karady, A. Jagota, M. Shah and A. M. Yates, "Aging in Silicone Rubber Used for Outdoor Insulation", IEEE Trans. PD, Vol. 7, pp. 525-538.1992.
• [8] S. M. Rowland, Y. Xiong, J. Robertson, and S. Hoffmann, "Aging of silicone rubber composite insulators on 400 kV transmission lines," IEEE Trans. DEI, vol. 14, pp. 130-6, 2007.
• [9] B. Venkatesulu and M. Joy Thomas, “Long-term Accelerated Multistress aging of Composite Outdoor Polymeric Insulators”, IEEE Intern. Conf. Solid Dielectr., Winchester, UK, pp. 188-201, 2007.
• [10] B. Marungsri, H. Shinokubo, R. Matsuoka and S. Kumagai, "Effect of Specimen Configuration on Deterioration of Silicone Rubber for Polymer Insulators in Salt Fog Ageing Test", IEEE Trans.DEI, Vol. 13, pp. 129–138, 2006.
• [11] S. M. Gubanski and A. E. Vlastos, "Wettability of Naturally Aged Silicone and EPDM Composite Insulators", IEEE Trans. PD, Vol. 5, pp. 1527-1535,1990.
• [12] N. Chaipanit, C. Rattanakhongviput and R. Sundararajan, "Accelerated Multistress Aging of Polymeric Insulators under San Francisco Coastal Environment", IEEE Conf. Electr. Insul. Dielectr. Phenomena (CEIDP), Kitchener, Canada, pp. 636-639, 2001.
• [13] Y. Khan, “Degradation of High Voltage Polymeric Insulators in Arid Desert's Simulated Environmental Conditions”, Amer. J. of Engg. and Appl. Sci., Vol. 2, 438-445, 2009.
• [14] Venkatesulu, B.; Thomas, M.J., "Long-term accelerated weathering of outdoor silicone rubber insulators", IEEE Trans. DEI, Vol.18, No.2, pp.418-424, 2011.
• [15] S.M. Gubanski, A. Dernfalk, J. Andersson and H. Hillborg, "Diagnostic Methods for Outdoor Polymeric Insulators", IEEE Trans. DEI., Vol. 14, pp. 1065–1080, 2007.
• [16] R. W. Harmon, G. G. Karady, and O. G. Amburgey, "Electrical test methods for non-ceramic insulators used for live line replacement", IEEE Trans. PD, Vol. 12, No.2, 965-970, 1997.
• [17] JB Zhou, "Electrical Characteristics of Aged Composite Insulators", MS dissertation, Queensland University of Technology, 2003
• [18] Kanashiro, A.G., and Burani, G.F, "Leakage current monitoring of insulators exposed to marine and industrial pollution", Conf. Record of 1996 IEEE Int. Symp. Electrical Insulation, Montreal, Canada, pp. 271–274,1996.
• [19] Isaias, R.-V., and Jose, L.-F.-C., "Criteria for the diagnostic of polluted ceramic insulator based on the leakage current monitoring technique", 1999 Ann. Rep. of Conf. on Electrical Insulator and Dielectric Phenomena, Austin, 715–178, 1999.
• [20] Suda, T, " Frequency characteristic of leakage current waveforms of an artificially polluted suspension insulator", IEEE Trans. DEI, Vol.8, No.4, pp. 705–709, 2001.
• [21] Sato, M., Nakajiuma, A., and Komukai, T, "Spectral analysis of leakage current on contaminated insulator by auto regressive method", 1998 Ann. Rep. of Conf. on Electrical Insulator and Dielectric Phenomena, Atlanta, USA, pp. 64–66, 1998.
• [22] Y.C. Song and D.H. Choi, "High-frequency Components of Leakage Current as Diagnostic Tool to Study Ageing of Polymer Insulators under Salt Fog", Electronics Letters, Vol. 41, pp. 684–685, 2005.
• [23] C.R.Li, Q. Shi, Y.C.Cheng, "The pulse current from faulty suspension insulators and some Types of corona discharges", Proceedings of 10th international symposium of high voltage engineering, Outdoor insulation, pp.125-128, 1997.
• [24] Q Zhang, J Zhu, J Jia, F Tao and L Yang, "Design of a current transducer with a magnetic core for use in measurements of nanosecond current pulses", Measurement Science and Technology, vol. 17, pp.895-900, 2006.