Calculation of Coil Inductance in Tubular Linear Reluctance Motor using Three Dimensional FEM

• Autorzy: Mosallanejad A. , Shoulaie A.

Warianty tytułu

PL

Obliczenia indukcyjności cewki w rurowym liniowym silniku reluktancyjnym

• Języki publikacji: EN

Abstrakty

EN

This paper reports a study of coil inductance in every plunger positions in tubular linear reluctance motors (TLRMs) with open type magnetic circuits. In this paper, all inductance (minimum and maximum inductance) calculation methods in winding of tubular linear reluctance motors are described. Furthermore, a new approach in maximum inductance calculation based on energy method is proposed. Electromagnetic finite-element analysis is used for motor simulation and coil inductance calculation. Moreover, inductance of a prototype TLRM was measured with experimental methods. Simulation results of coil inductance calculation using 3-D FEM with coil current excitation is compared to theoretical and experimental results. The comparison yields a good agreement.

PL

Przedstawiono analizę indukcyjności cewki stosowanej w rurowym reluktancyjnym silniku liniowym z otwartym obwodem magnetycznym. Zastosowano metodę elementu skończonego do symulacji silnika i obliczania indukcyjności cewki.

Słowa kluczowe

EN

Tubular linear reluctance motors; minimum induntance; maximum inductance; FEM analysis; electrical technology; electrical power engineering

PL

silnik reluktancyjny; indukcyjność; metoda elementów skończonych; elektrotechnika; elektroenergetyka

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2011
• Tom: R. 87, nr 11
• Strony: 271--276
• Opis fizyczny: Bibliogr. 22 poz., il., tabl., wykr.

Twórcy

autor

Mosallanejad A.

autor

Shoulaie A.

• Iran University of Science and Technology, Tehran, Iran,

Bibliografia

• [1] Syed A. Nasar "Linear Electrical Motors : Theory , Design, and Practical Application ",Prentice- hall, 1987
• [2] B. Marder, “A coilgun design primer,” IEEE Trans. Magn., vol. 29, no. 1, pp. 701–705, Jan. 1993.
• [3] E. R. Laithwaite, “A History of Linear Electric Motors” London, U.K.:Macmillan, 1987.
• [4] J. J. Blakley, “A linear oscillating ferroresonant machine,” IEEE Trans. Magn., vol. MAG-19, no. 4, pp. 1574–1579, Jul. 1983.
• [5] S. A. Nasar and I. Boldea, “ Linear Electric Motors”. Englewood Cliffs, prentice-Hall, 1987.
• [6] B. Tomczuk and M. Sobol, “Field analysis of the magnetic systems for tubular linear reluctance motors,” IEEE Trans. Magn., vol. 41, no. 4, pp. 1300–1305, Apr. 2005
• [7] E.A. Mendrela “Comparison of the Performance of a Linear Reluctance Oscillating Motor Operating Under AC Supply with One Under DC Supply” IEEE Transactions on Energy Conversion, Vol. 14, No. 3, September 1999
• [8] D. A. Bresie and J. A. Andrews, “Design of a reluctance accelerator,” IEEE Trans. Magn., vol. 27, no. 1, pp. 623–627, Jan. 1991.
• [9] E.A. Mendrela Z.J. Pudlowski " Transients And Dynamics In A Linear Reluctance Self-Oscillating Motor" IEEE Trans. on Energy Conversion, vol. 7, No.1, March 1992
• [10] J. Corda and shabbir M. Jamil, “ Experimental Determination of Equivalent-Circuit Parameters of a Tubular Switched Reluctance Machine With Solid-Steel Magnetic Core” IEEE TRANS. on Industrial Electronics, vol. 57, No.1,Jan.2010
• [11] Z.Q.Zhu, , X. Chen “Analysis of an E-Core Interior Permanent Magnet Linear Oscillating Actuator” IEEE Trans. on Magn. ,Vol. 45,No.10, Oct. 2009
• [12] A. Waindok, G. Mazur, “A Mathematical and Physical Models of the Three-Stage Reluctance Accelerator” IEEE 2009
• [13] S. Gibson G.W. Jewell R.E. Clark “Variable-air gap, cylindrical, linear variable reluctance actuators for high-force, medium-stroke applications” Published in IET Electric Power Applications, Revised on 21st January 2008
• [14] Tomczuk and Sobol. “ A Field-Network of a Linear Oscillating Motor and Its Dynamics Characteristics” IEEE Trans. on Magn., vol. 41, no. 8, August 2005
• [15] L.L.Allgilberls, M.D.brown” Magnetocumulative Generators “ Springer- verlag, pp.249-265.1999
• [16] R.haghmaram, A.shoulaie, M.H. Khanzadeh” Parallel Connection of Traveling Wave Tubular Linear Induction Motors” Proc. 3th Int. Conf. on Technical and Physical problems in power Engineering, turkey. Pp. 192-199, 2006
• [17] Thorborg , Kjeld “ Power Electronic ” Prentice Hall, 1988. 504 p.
• [18] C. M. Fowler, R. S. Caird, W. B. Garn “ An Introduction to Explosive Magnetic Flux Compression Generators ” Los Alamos Report, LA-5890-MS,pp.1-7,1975
• [19] L. Grover, “Inductance Calculations- Working Formulas and Tables”. New York: Dover, 1962.
• [20] D.K. Cheng , Fundamentals of Engineering Electromagnetic. Addison-Wesley, 1993.
• [21] G. Grandi , Marian K.Kazimierczuk ,Antonio Massarini , Ugo Reggiani and Giuseppe Sancineto “ Model of Laminated Iron – Core Inducted for High Frequencies” IEEE Trans. on Magn., vol. 40, no. 4, July 2004
• [22] Slawomir Tumanski,” Induction Coil Sensors – a review” journal of Measurement Science and Technology , vol. 18, January 2007