Magnetic Properties of Non-Oriented Electrical Steels under Compressive Stress Normal to Their Surface

• Autorzy: Yamamoto K. , Yanase S.

Warianty tytułu

PL

Właściwości magnetyczne blach elektrotechnicznych niezorientowantych poddanych naprężeniu ściskającemu normalnemu do powierzchni

• Języki publikacji: EN

Abstrakty

EN

Magnetic properties of non-oriented electrical steels are measured under a compressive stress up to 28 MPa normal to their surface. It is shown that the perpendicular stress changes their permeability and magnetic losses along their circumferential direction. The variations in magnetic properties are discussed in terms of changes in magnetic domains due to the stress.

PL

Zbadano wpływ naprężeń ściskających na niezorientowane blachy elektrotechniczne. Stosowano naprężenia do 28 MPa normalne do powierzchni. Stwierdzono że naprężenia prostopadłe powodują zmiany przenikalności i strat w obu kierunkach.

Słowa kluczowe

EN

electrical steel sheet; stress effect; compression; magnetic loss; electrical technology; electrical power engineering

PL

blachy elektrotechniczne; naprężenia mechaniczne; elektrotechnika; elektroenergetyka

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2011
• Tom: R. 87, nr 9b
• Strony: 97--100
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Yamamoto K.

autor

Yanase S.

• University of the Ryukyus, 1 Senbaru, Nishihara, Okinawa, 903-0213 Japan,

Bibliografia

• [1] M.LoBue, C.Sasso, V.Basso, F.Fiorillo, G.Bertotti, “Power losses and magnetization process in Fe-Si non-oriented steels under tensile and compressive stress,” J. Magn. Magn. Mat., vol. 215-216, pp. 124-126, 2000.
• [2] A.Pulnikov, R.Decocker, V.Permiakov, L.Dupre, L.Vandevelde, R.Petrov, J.Melkebeek, Y.Houbarert, J.Gyselinck, H.Wisselink, “The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steels.,” J. Magn. Magn. Mat., vol. 290-291, pp. 1454-1456, 2005.
• [3] K.Yamamoto, E.Shimomura, K.Yamada, T.Sasaki, “Effects of external stress on magnetic properties in motor cores,” TIEEJ, vol.117-A, no.3, pp.311-316March 1997; reprinted in Scripta Technica, Electr. Eng. Jpn., vol. 123, no. 1, pp.15-22, 1998.
• [4] K.Fujisaki, R.Hirayama, T.Kawachi , S.Satou, C.Kaidou, M.Yabumoto, T.Kubota, “Motor core iron loss analysis evaluating shrink fitting and stamping by finite-element method,” IEEE Trans. Magn., vol. 43, no. 5, pp. 1950-1954, 2007.
• [5] D.Miyagi, Y.Aoki, M.Nakano, N.Takahashi, “Effect of compressive stress in thickness direction on iron losses of nonoriented electrical steel sheet,” IEEE Trans. Magn., vol. 46, no. 6, pp. 2040-2043, 2010.
• [6] A.Basak, A.J.Moses, R.Al-Bir, “Effect of clamping stress on power loss in powercore strip and Si-Fe transformer cores,” IEEE Trans. Magn., vol. 26, no. 5, pp.1999-2001, 1990.
• [7] K.Yamamoto, S.Hanba, “Waveform control for magnetic testers using a quasi-Newton method,” J. Magn. Magn. Mat., vol. 320, pp. e539-e541, 2008.
• [8] M.Takezawa, J.Yamasaki, T.Honda, C.Kaido, “Domain structure of chemically thinned non-oriented electrical sheet,” J. Magn. Magn. Mat., vol. 254-255, pp. 167-169, 2003.
• [9] K.Yamamoto, Y.Yamashiro, “Effects of compressive stress on hysteresis loss and magnetostriction of grain oriented Si-Fe sheets,” J. Appl. Phys., vol. 93, no. 10, pp.6683-6685, 2003
• [10] J.W.Shilling, “Domain structure during magnetization of grainoriented 3 % Si-Fe as a function of applied tensile stress,” J. Appl. Phys., vol. 42, no. 4, pp. 1787-1789, 1971.
• [11] M.Imamura, T.Sasaki, T.Yamaguchi, “Domain-wall eddycurrent loss in a stripe domain structure of Si-Fe crystals inclined slightly from the perfect (110)[001] orientation,” IEEE Trans. Magn., vol. MAG-20, no.6, pp. 2120-2129, 1984.