Identyfikatory
Warianty tytułu
Analiza strat w rdzeniu typu EI z uwzględnieniem właściwości wektorowych
Języki publikacji
Abstrakty
We analyze the EI-shaped iron-core inductors with air-gaps by using 2-D finite element analysis considering vector magnetic property. We can investigate the iron loss distribution in the cores affected by the length of the air-gaps. As a result, we can show the difference of local iron loss distribution in the inductor cores when the length of the air-gaps is changed. Moreover, it is shown that the iron loss distribution differs from the maximum flux density distribution.
Przeanalizowano rdzeń typu EI metopdą elementu skończonego z uwzględnieniem właściwości wektorowych. Zbadano wpływ wielkości szczeliny. Stwierdzono różny rozkład lokalnej wartości strat zależny od wielkości szczeliny. Ten rozkład styrat zależy też od wielkości indukcji.
Wydawca
Czasopismo
Rocznik
Tom
Strony
81--84
Opis fizyczny
Bibliogr. 4 poz., rys., tab., wykr.
Twórcy
autor
autor
- Department of Electrical and Electronic Engineering, College of Engineering, Ibaraki University, Hitachi, Ibaraki, 316-8511, Japan, soda@mx.ibaraki.ac.jp
Bibliografia
- [1] Hashimoto Y., Enokizono M., Mogi H., Measurement of the localized iron loss in electromagnetic steel sheet by using the needle probe method, Journal of Applied Physics, 91(2002), No. 10, 6935-6937
- [2] Zhang Y., Eum Y. H., Xie D., Koh C. S., An Improved Engineering Model of Vector Magnetic Properties of Grain- Oriented Electrical Steels, IEEE Trans. on Magn., 44(2008), No. 11, 3181-3184
- [3] Soda N., Enokizono M., Improvement of T-Joint PartConstructions in Three-Phase Transformer Cores by Using Direct Loss Analysis with E&S Model, IEEE Trans. on Magn., 36(2000), No. 4, 1285-1288
- [4] Soda N., Enokizono M., E&S hysteresis model for twodimensional magnetic properties, Journal of Magnetism and Magnetic Materials, 215-216(2000), 626-628
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-PWA7-0051-0019