Analyses of different methods used for creation of digital terrain model (DTM)

• Autorzy: Pająk K. , Ciećko A. , Oszczak S.
• Konferencja: Bilateral Geodetic Meeting Poland-Italy (8th; 22-24.06.2006; Wrocław, Poland)
• Języki publikacji: EN

Abstrakty

EN

It is possible to conect data for creation of DTM using different measurment technologies. The paper describes different technologies used for collection of data for creation of DTM. First the precise GPS RTK method with the use of GSM/GPRS transmission of corrections is presented. Precise RTK method is used for real time determination of horizontal and vertical coordinates of the points used in the model. This method is very precise and effective. Second method in our research was the photogrammetric method using photogrammetric digital station. Photogrammetric technology using measurements on stereo model from aerial photograph is an interesting alternative for RTK method. Finnaly classical tachimetric method of measurement is presented. This method is considered as the most reliable but also the most time consuming. All presented methods were used for DTM creation of the same test area. The comparisons of the methods and analyses are given in the paper. Conclusions and plans for the future work are presented.

Słowa kluczowe

EN

computer modelling; GPS project; territory

PL

modelowanie komputerowe; GPS projekt; teren

• Wydawca: Wydział Geodezji i Kartografii Politechniki Warszawskiej
• Czasopismo: Reports on Geodesy
• Rocznik: 2006
• Tom: z. 2/77
• Strony: 211--217
• Opis fizyczny: Bibliogr. 3 poz., wykr., schem.

Twórcy

autor

Pająk K.

autor

Ciećko A.

autor

Oszczak S.

• University of Warmia and Mazury Olsztyn Poland

Bibliografia

• 1. Ciećko A., Oszczak B., Oszczak S., (2006), Driver - By DTM. GPS and GSM Power Cost - Effective Terrain Modelling, GPS World, April 2006, Vol. 7, No. 4.
• 2. Z. Ciećko A., Oszczak B., Oszczak S., (2003), Determination of Accuracy and Coverage of Permanent Reference Station (DGPS/RTK) in Gdynia. 7th Bilateral Geodetic Meeting Italy-Poland, Bressanone, Italy, 22-24 May 2003, Published in Reports on Geodesy, No. 2(65).
• 3. Gościewski D., Bojanowski K., (2005), Tecnnical Sciences, Suplement 2 (2005), Publisher UWM.