Modelowanie przepływów burzliwych w maszynach hydraulicznych. Model naprężeń Reynoldsa

• Autorzy: Karaśkiewicz K.
• Języki publikacji: PL

Abstrakty

PL

W pracy omówiono modelowanie naprężeń Reynoidsa w przepływach burzliwych, jakie występują w maszynach hydraulicznych. Przedstawiono analizę równań naprężeń w postaci różniczkowej i algebraicznej.

Słowa kluczowe

PL

maszyny hydrauliczne; model naprężeń Reynoldsa; modelowanie przepływów burzliwych

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Biuletyn Instytutu Techniki Cieplnej Politechniki Warszawskiej
• Rocznik: 2004
• Tom: nr 89/90
• Strony: 3--13
• Opis fizyczny: Bibliogr. 33 poz., rys., wykr.

Twórcy

autor

Karaśkiewicz K.

• Instytut Techniki Cieplnej

Bibliografia

• [1] Barlow R.S., Johnston J.P.: Structure of a Turbulent Boundary Layer on a Concave Surface - Journal of Fluid Mechanics. Vol. 191, 1988, p. 137.
• [2] Van Den Berg В.: Three-Dimensional Turbulent Boundary Layers. Springer-Verlag, 1982, p. 10.
• [3] Driver D.M., Hebbar S.K.: Three-Dimensional Shear-Driven Boundary-Layer Flow with Streamwise Adverse Pressure Gradient. AIAA Journal, 1989.
• [4] Launder B.E.: Stress Transport Closures - Into the Third Generation - Turbulent Shear Flows 1. Selected pap. 1-st Int. Symp. Pennsylvania, Pa, 1977 also Berlin 1979, p. 259-266.
• [5] Launder B.E., Morse Α.: Numerical Prediction of Axisymetric Free Shear Flows with a Reynolds Stress Closure - Turbulent Shear Flows 1. Selected pap. 1-st Int. Symp.
• [6] Marvin J.G.: Progress and Challenges in Modeling Turbulent Aerodynamic Flows. In Engineering Turbulence Modelling and Experiments, Elsevier, 1990, p. 3.
• [7] Jones W.P., Musonge P.: Closure of the Reynolds Stress and Scalar Flux Equations – The Physics of Fluids. Vol. 31, no. 12, 1988, p. 3589.
• [8] Launder B.E., Reece G.J., Rodi W.: Progress in the Development of a Reynolds-Stress Turbulence Closure. Journal of Fluid Mechanics, vol. 68, part 3, 1975, p. 537.
• [9] Gessner F.B., Emery A.F.: A Reynolds stress model for turbulent corner flows. Transactions of the ASME. Journal of Fluids Engineering, no. 1, 1976, p. 261.
• [10] Gibson M.M.: An algebraic stress and heat-flux model for turbulent shear flow with streamline curvature. International Journal of Heat and Mass Transfer, vol. 21, 1978, p. 1609.
• [11] Leshziner M.A., Rodi W.: Calculation of annular and twin parallel jets using various discretization schemes and turbulence - Model variations - Transactions of the ASME. Journal of Fluids Engineering, vol. 103, 1981, p. 352.
• [12] Martinuzzi R., Pollard Α.: Comparative study of turbulence models in predicting turbulent pipe flow - Part I: Algebraic stress and k-z models. AIAA Journal, vol. 27, no. 1, 1989, p. 29.
• [13] Pourahmadi F., Humphrey J.A.C.: Prediction of curved channel flow with an extanded κ-ε model of turbulence. AIAA Journal, vol. 21, no. 10, 1983, p. 1365.
• [14] Dawydow B.I.: К Статистичецкой Динамике Несжимаемой Турбулентной Жидкости. Доклады Академи Наук СССР, Гидромеханика, vol. 127, по. 4, 1961, р. 768.
• [15] Daly B.J., Harlow F.H.: Transport equations in turbulence. The Physics of Fluids, vol. 13, no. 11, 1970, p. 2634.
• [16] Hanjalic K., Launder B.E.: Fully developed asymmetric flow in a plane channel. Journal of Fluid Mechanics, vol. 51, part 2, 1972, p. 301.
• [17] Rotta J.: Statistische Theorie Nichthomogener Turbulenz. Zeitshrift ftr Physik, vol. 129, 1951, p. 547.
• [18] Naot D., Shavit Α., Wolfshtein M.: Two-point correlation model and the redistribution of Reynolds stresses. The Physics of Fluids, vol. 16, no. 6, 1973, p. 738.
• [19] Naot D., Shavit Α., Wolfshtein M.: Numerical calculation of Reynolds stresses in a square duct with secondary flow. Warme - und Stoffubertragung, vol. 7, 1974, p. 151.
• [20] Launder B.E.: On the effects of a gravitational field on the turbulent transport of heat and momentum. Journal of Fluid Mechanics, vol. 67, part 3, 1975, p. 569.
• [21] Gibson Μ.Μ., Younis Β.Α.: Calculation of boudary layers with sudden transverse strain. Transactions of the ASME, Journal of Fluids Engineering, vol. 108, 1986, p. 470.
• [22] Leslie D.C.: Analysis of a strongly sheared nearly homogeneous turbulent shear flow. Journal of Fluid Mechanics, vol. 98, part 2, 1980, p. 435.
• [23] Rodi W.: A new algebraic relation for calculating the Reynolds stresses. ZAMM 56, 1976, p. 219.
• [24] Launder B.E.: A generalized algebraic stress transport hypothesis. AIAA Journal, vol. 20, no. 3, 1982, p. 436.
• [25] So R.M.C.: A turbulence velocity scale for curved shear flows. Journal of Fluid Mechanics, vol. 70, part 1, 1975, p. 37.
• [26] Lumley J.L., Khajeh-Nouri P.: Computational modelling of turbulent transport. Advances in Geophysics, vol. A15, 1974, p. 169.
• [27] Hong S.K., Murthy S.N.B.: Pressure-strain correlation in curved wall boundary layers. AIAA Journal, vol. 24, no. 6, 1986, p. 971.
• [28] Gibson M.M., Launder B.E.: On the calculation of horizontal turbulent, free shear flows under gravitational influence. Transactions of the ASME - Journal of Heat Transfer, no. 2, 1976, p. 81.
• [29] Gibson M.M., Launder B.E.: Ground effect on pressure fluctuations in the atmospheric boundary layer. Journal of Fluid Mechanics, vol. 86, part 3, 1978, p. 491.
• [30] Launder B.E., Samaraweera S.A.: Application of a second-moment turbulence closure to heat and mass transport in thin shear flows. International Journal of Heat and Mass Transfer, vol. 21, 1978, p. 1609.
• [31] Karaśkiewicz K.: Turbulent flow along enclosed rotating disk. VDI Berichte 1186, 1995, p. 79.
• [32] Karaśkiewicz К., Jędral W.: Przepływ turbulentny w uszczelnieniu rowkowanym. XII Krajowa Konferencja Mechaniki Płynów. Jawor, 1996, materiały konferencyjne, t. II, s. 211-218.
• [33] Karaśkiewicz K.: Poprawa sprawności pomp poprzez zmniejszenie straty objętościowej - uszczelnienie rowkowane. III Konferencja Problemy Badawcze Energetyki Cieplnej, Warszawa 1997.