PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Application of the coupled Euler / flight dynamics model into analysisof a rapid pull-up manoeuvre

Autorzy
Identyfikatory
Warianty tytułu
Konferencja
Proceedings of the Fourth Seminar on Recent Research and Design Progress in Aeronautical Engineering and its Influence on Education/seminar(IV; 30.11-02.12.2000; Warszawa, Polska)
Języki publikacji
EN
Abstrakty
EN
The Eater flow model for in viscid, compressible gas and the aircraft flight dynamics model were coupled to analyse rapid pull-up manoeuvre. The Euler flow equations were used to obtain aerodynamic forces and moments acting on a simplified aircraft configuration, considered as a rigid body. The McCormack predictor-corrector scheme for a finite differences representation was used as a numerical method for solving the Euler flow equations. The second order artificial viscosity was introduced to improve convergence of the scheme. Far field boundary conditions in the Euler model were determined from the steady state conditions of in the horizontal flight. Aircraft components in the body frame of were computed having known the of attack of the aircraft and its speed. The air density and pressure correspond to the height. From the boundary condition on the wing surface it follows that local flow vector is tangent to the local surface. 225200 grid points in five connected structural grid blocks in computations. The flight dynamics equations of motion were used to describe the aiecraft dynamics. No additional aerodynamic derivatives were considered. Some dynamic phenomena and damping effects (including hysteresis) were taken into account. In the simulation process both models were used and coupled by means of the mutual data transfer process. Any change of flight conditions immediately influences on the flow. Initial conditions for the flight dynamics equations of motion were settled up coming from the solutionof the Euler flow model for several cases of stationary flow. Only symmetrical motion and symmetrical airflow were examined. This makes it possible to use a grid for half of the aircraft only. The influence of the horizontal tailplane and fuselage on the main wing flow was neglected. The results of simulation (including flight path history, surface loading, aerodynamic forces and moments) were compared to those of classical approach, obtained from pure flight dynamics equations of motion.
Twórcy
autor
autor
  • Warsaw University of Technology, Warsaw, Poland
Bibliografia
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-PWA3-0039-0016
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.