PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Pomiar własności fizyko-chemicznych ciał stałych i ciekłych w wysokotemperaturowych procesach przemian fazowych

Identyfikatory
Warianty tytułu
EN
Measurement of physico-chemical properties of solid and liquids in temperature processes of phase changes
Języki publikacji
PL
Abstrakty
PL
W artykule zaprezentowano wyniki pomiarów kąta zwilżania i napięcia powierzchniowego uzyskane za pomocą skomputeryzowanego systemu pomiarowego własności fizyko-chemicznych THERMO-WET. Zastosowanie w systemie THERMO-WET, specjalnie opracowanych metod przetwarzania i analizy obrazów, pozwoliło na uzyskanie większej dokładności oraz powtarzalności pomiarów niż w systemach stosowanych obecnie.
EN
Measurement results of wetting angle and surface tension obtained wth computerised system for measurement of physico-chemical properities THERMO-WET are presented in this paper. The results obtained using THERMO-WET system are far more accurate than those obtained by means of the currently applied non-automatic methods. It is a result of specially designed image processing and analysis algorithms.
Rocznik
Tom
Strony
7--17
Opis fizyczny
Bibliogr. 26 poz., rys., tab., wykr.
Twórcy
autor
  • Katedra Informatyki Stosowanej, Politechnika Łódzka
autor
  • Katedra Informatyki Stosowanej, Politechnika Łódzka
autor
  • Katedra Informatyki Stosowanej, Politechnika Łódzka
autor
  • Instytut Spajania, Politechnika Warszawska
  • Przemysłowy Instytut Elektroniki w Warszawie
autor
  • Przemysłowy Instytut Elektroniki w Warszawie
Bibliografia
  • [1] Metcalfe, A.G. (1981) Interfaces in metal-matrix composites. Academic Press, New York, USA.
  • [2] Pask, J., Evans, A. (ed.) (1981) Surfaces and interfaces in ceramic and ceramic-metal systems. Plenum Publishing Co., New York, USA.
  • [3] Matsunawa, A., Ohji, T. (1982) Role of surface tension in fusion welding, Part l. Transactions of Japan Welding Research Institute, Vol. 11, str. 145-154.
  • [4] Matsunawa, A., Ohji, T. (1983) Role of surface tension in fusion welding, Part II. Transactions of Japan Welding Research Institute, Vol. 12, str. 123-130.
  • [5] Matsunawa, A., Ohji, T. (1984) Role of surface tension in fusion welding, Part III. Transactions of Japan Welding Research Institute, Vol. 13, str. 147-156.
  • [6] Dellannay, F., Froyen, L., Deruyttere A. (1987) The wetting of soiids by molten metais and its relation to the preparation of metal-matrix composites. Joumal of Material Science, Vol. 22, str. 1-16.
  • [7] Baglin, J.E.E. (1988) Thin film adhesion: new possibilities for interface engineering. Material Science and Engineering, Vol. B-1, str. 1-7.
  • [8] Nicholas, M.G. (ed.) (1990) Joining of ceramics. Chapman & Hall, London, UK.
  • [9] Senkara, J., Windyga, A. (1990) Podstawy teorii procesów spajania. Wydawnictwo Politechniki Warszawskiej, Warszawa.
  • [10] Mortensen, A. (1991) Interfacial phenomena in the solidification processing of metalmatrix composites. Material Science and Engineering Vol. A-135, str. 1-11.
  • [11] Woodruff, D.P. (1973) The solid-liquid interface. Cambridge University Press, Cambridge, UK.
  • [12] Missol, W. (1974) Energia powierzchni rozdziału faz w metalach. Wydawnictwo Śląsk, Katowice.
  • [13] Murr, L.E. (1975) Interfacial phenomena in metais and alloys. Addison-Wesley Publishing Co., Reading, Massachusetts, USA.
  • [14] Adamson, A.W., Gast A.P. (1997) Physical Chemistry of Surfaces, Wiley-Interscience, New York, USA.
  • [15] Kinloch, A.J. (1980) Review: The science of adhesion. Journal on Material Science, Vol. 15, str. 2141-2166.
  • [16] De Gennes, P.G. (1985) Wetting: Statics and Dynamics. Reviews of Modern Physics 57, Vol. 3, str. 827-863.
  • [17] Strzecha, K. (2002) Zastosowanie przetwarzania analizy obrazów w wysokotemperaturowych pomiarach własności fizyko-chemicznych wybranych materiałów. Rozprawa doktorska, Wydział Elektrotechniki i Elektroniki, Politechnika Łódzka.
  • [18] Sankowski, D., Strzecha, K., Jeżewski, S., Senkara, J., Łobodziński, W. (1999) Computerised device with CCD camera for measurement of surface tension and wetting angle in solid-liquid systems. IEEE Instrumentation and Measurement Technology Conference, Venice, ltaly, str. 164-168.
  • [19] Sankowski, D., Senkara, J., Strzecha, K., Jeżewski, S. (2001) Automatic investigation of surface phenomena in high temperature solid and liquid contacts. 18th IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary, str. 346-249.
  • [20] Sankowski, D., Strzecha, K., Jeżewski, S. (2000) Image processing in physical parameters measurement. 16th IMEKO World Congress, Vienna, Austria, str. 277-283.
  • [21] Sankowski, D., Senkara, J., Strzecha, K., Jeżewski, S. (2001) Image segmentation algorithms in high temperature measurements of physical properties using CCD camera. 18th IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary, str. 346-249.
  • [22] Sankowski, D., Strzecha, K., Jeżewski, S. (2000) Digital image analysis in measurement of surface tension and wettability angle. IEEE International Conference on Modern Problems in Telecommunication, computer Science and Engineers Training, Lviv, Ukraine, str. 129-130.
  • [23] Holtzer, M., Retel, K. (1997) Pomiar napięcia powierzchniowego ciekłych metali i stopów - przegląd metod oraz analiza wyników. Inżynieria Materiałowa Nr 4 (99), str. 128-134.
  • [24] Naidich, J.V. (1981) The wettability of solids by liquid metals. Progress on Surface and Membrane Science, Vol. 14, Academic Press, New York, USA, str. 353-490.
  • [25] Hondros, E.D. (1984) Bonding of metallceramic interfaces. Adhesion in aluminium oxide - metal systems. lnt. Phys. Conf. Ser. 75, str. 121.
  • [26] Keene, B.J. (1993) Review of data for the surface tension of pure metals. International Materials Reviews, Vol. 38, No. 4, str. 157-189.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-PWA3-0026-0019
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.