Modelowanie sił tarcia suchego w dynamice ciała sztywnego w przestrzeni

Kudra, G.

Artykuł - szczegóły

Tytuł artykułu

Modelowanie sił tarcia suchego w dynamice ciała sztywnego w przestrzeni

Autorzy

Kudra G.

Identyfikatory

Warianty tytułu

Modelling of dry fricton in spatial rigid body dynamics

Języki publikacji

Abstrakty

Słowa kluczowe

tarcie modelowanie matematyczne opór toczenia

friction mathematical modelling rolling resistance

Wydawca

Wydawnictwo Politechniki Łódzkiej

Czasopismo

Zeszyty Naukowe. Rozprawy Naukowe / Politechnika Łódzka

Rocznik

2012

Tom

Z. 425

Strony

1--132

Opis fizyczny

Bibliogr. 97 poz.

Twórcy

autor

Kudra G.

Wydział Mechaniczny Politechniki Łódzkiej

Bibliografia

1. Acary V., Brogliato B.: Numerical Methods for Nonsmooth Dynamical Systems. Applications in Mechanics and Electronics Series:Lecture Notes in Applied and Computational Mechanics Vol. 35, Springer Verlag, Heidelberg 2008, s. 565.
2. Aghili F., Dupuis E., Piedbceuf J.-C., de Carufel J.: Hardware-in-the-loop simulations of robots performing contact tasks. Proceedings of the 5th International Symposium on Artificial Intelligence, Robotics and Automation in Space, 1999, s. 583-588.
3. Al-Bender F., Lampaert V., Swevers J.: A novel generic model at asperity level for dry friction force dynamics. Tribology Letters, 16, 2004, s. 81-93.
4. Awrejcewicz J., Tomczak K.: Analiza i sterowanie drgań układów dyskretnych z uderzeniami. Komputerowe wspomaganie w obliczeniach naukowo-technicznych – przykłady zastosowań pakietów MATLAB i Maple V.M. Szymkat. Krakowskie Centrum Informatyki Stosowanej, Kraków 1998.
5. Awrejcewicz J., Kudra G., Lamarque C.-H.: Analysis of bifurcations and chaos in three coupled physical pendulums with impacts. Proceedings of DETC'01, ASME 2001 Design Engineering Technical Conference and Computers and Information in Engineering Conference, Pittsburgh, 2001, s. 1271-1278.
6. Awrejcewicz J., Kudra G.: Modeling and numerical investigation of non-linear dynamics of a mono-cylinder combustion engine. Proceedings of DETC'03, ASME 2003 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois, 2003, s. 1499-1507.
7. Awrejcewicz J., Kudra G., Lamarque C.-H.: Dynamics investigation of three coupled rods with a horizontal barrier. Meccanica, 38(6), 2003, s. 687-698.
8. Awrejcewicz J., Lamarque C.-H.: Bifurcation and Chaos in Nonsmooth Mechanical Systems. World Scientific, Singapore 2003.
9. Awrejcewicz J., Kudra G., Lamarque C.-H.: Investigation of triple pendulum with impacts using fundamental solution matrices. International Journal of Bifurcation and Chaos, 14(12), 2004, s. 4191-4213.
10. Awrejcewicz J., Kudra G.: Modeling, numerical analysis and application of triple physical pendulum with rigid limiters of motion. Archive of Applied Mechanics, 74(11-12), 2005, s. 746-753.
11. Awrejcewicz J., Kudra G.: Stability analysis and Lyapunov exponents of a multi-body mechanical system with rigid unilateral constraints. Nonlinear Analysis, Theory, Methods and Applications, 63(5-7), 2005.
12. Awrejcewicz J., Kudra G.: The piston – connecting rod – crankshaft system as a triple physical pendulum with impacts. International Journal of Bifurcation and Chaos, 15(7), 2005, s. 2207-2226.
13. Awrejcewicz J., Olejnik P.: Friction pair modeling by a 2-DOF system: Numerical and experimental investigations. Int. J. Bifurcation Chaos 15(6), 2005, s. 1931-1944.
14. Awrejcewicz J., Holicke M.: Analytical prediction of stick-slip chaos in a double self-excited Duffing-type oscillator. Math. Probl. Eng., 2006, Art. No. 70245, 2006, s. 79.
15. Awrejcewicz J., Supeł B., Lamarque C.-H., Kudra G., Wasilewski G., Olejnik P.: Numerical and experimental study of regular and chaotic motion of triple physical pendulum. International Journal of Bifurcation and Chaos, 18(10), 2008, s. 2883-2915.
16. Awrejcewicz, J.: Mechanika techniczna i teoretyczna. Wydawnictwo Politechniki Łódzkiej, Łódź 2011.
17. Awrejcewicz, J., Kudra, G.: Coupled model of dry friction and rolling resistance in the celtic stone modelling. International Conference on Structural Engineering Dynamics (ICEDyn), Tavira, 2011.
18. Baker G.A. Jr., Graves-Morris P.: Padé Approximants. Cambridge University Press, 1996.
19. Besselink B., Van De Wouw N., Nijmeijer H.: A semi-analytical study of stick-slip oscillations in drilling systems. J. Comput. Nonlinear Dynam., 6(2), 2011.
20. Bliman P.-A., Sorine M.: Friction modelling by hysteresis operators. Application to Dahl, stiction and Stribeck effects. Proceedings of Conference “Models of Hysteresis”, Trento, Italy, 1991.
21. Błażejczyk-Okolewska B., Kapitaniak T.: Dynamics of impact oscillators with dry friction. Chaos, Solitons and Fractals 7, 1996, s. 1455-1459.
22. Bondi S.H.: The rigid body dynamics of unidirectional spin. Proc. R. Soc. Lond., A(405), 1986, s. 265-279.
23. Borisov A.V., Mamaev I.S.: Strange attractors in rattleback dynamics. Physics-Uspekhi, 46(4), 2003, s. 393-403.
24. Borisov A.V., Kilin A.A., Mamaev I.S.: New effects in dynamics of rattlebacks. Doklady Physics, 51(5), 2006, s. 272-275.
25. Brogliato B.: Nonsmooth Mechanics, Springer, London 1999.
26. Caughey T.K.: A mathematical model of the "Rattleback". International Journal of Non-Linear Mechanics, 15 (4-5), 1980, s. 293-302.
27. Contensou P.: Couplage entre frottement de glissement et de pivotement dans la téorie de la toupe. Kreiselprobleme Gyrodynamics: IUTAM Symp., Calerina, 1962, s. 201-216.
28. Dahl P.: A solid friction model. Technical Report TOR-0158(3107-18)-1, The Aerospace Corporation, El Segundo, CA, 1968.
29. De Moerlooze K., Al-Bender F., Van Brussel H.: Modeling of the dynamic behaviour of systems with rolling elements. International Journal of Non-Linear Mechanics 46, 2011, s. 222-233.
30. Drucker D.C.: Coulomb friction, plasticity, and limit loads. Journal of Applied Mechanics, 21(1), 1954, s. 71-74.
31. di Bernardo M.: The complex behaviour of switching devices. IEEE Circuits and Systems Society Newsletter, 10, 1999, s. 1-13.
32. di Bernardo M., Garofalo F., Glielmo L., Vasca F.: Switchings, bifurcation and chaos in DC/DC converters. IEEE Transactions on Circuits and Systems I, 1, 1998, s. 133-141.
33. Filippov A.: Differential Equations with Discontinuous Right-hand Sides, Kluwer Academic Publishers, Dortrecht 1988.
34. Friedl C.: Der Stehaufkreisel. Praca magisterska, Universität Augsburg, 1997.
35. Galin L.A.: Contact Problems of Elasticity and Viscoelasticity. Nauka, Moscow 1980 (w j. rosyjskim).
36. Galvanetto U.: Some discontinuous bifurcations in two-block stick-slip system. Journal of Sound and Vibration, 248, 2001, 653-669.
37. Garcia A., Hubbard M.: Spin reversal of the rattleback: theory and experiment. Proc. R. Soc. Lond., A(148), 1988, s. 165-197.
38. Glocker Ch.: Formulation of spatial contact situations in rigid multibody systems. Computer Methods in Applied Mechanics and Engineering, 177, 1999, s. 199-214.
39. Glocker Ch.: Set-Valued Force Laws. Dynamics of Non-Smooth Systems. Vol. 1 of Lecture Notes in Applied Mechanics. Springer-Verlag, Berlin 2001.
40. Glocker Ch.: Reduction techniques for distributed set-valued force laws. Proceedings of the 2nd International Conference on Nonsooth/Nonconvex Mechanics with Applications in Engineering, Thessaloniki, Greece, 2006.
41. Gonthier Y.: Contact Dynamics Modelling for Robotic Task Simulation. Rozprawa doktorska, University of Waterloo, 2007.
42. Goyal S., Ruina A., Papadopoulos J.: Planar sliding with dry friction. Part 1. Limit surface and moment function. Wear 143, 1991, s. 307-330.
43. Gray A.: Surfaces of revolution. Rozdz. 20 w „Modern Differential Geometry of Curves and Surfaces with Mathematica”. CRC Press, Boca Raton 1997, s. 457-480.
44. Greenwood J.A., Tabor D.: The friction of hard sliders on lubricated rubber: the importance of deformation losses. Proc. Phys. Soc., 71(6), 1958, s. 989-1001.
45. Greenwood J.A., Minshall H., Tabor D.: Hysteresis losses in rolling and sliding friction. Proc. R. Soc. Lond., A(259), 1961, s. 480-507.
46. Howe R.D., Cutkosky M.R.: Practical force-motion models for sliding manipulation. The International Journal of Robotics Research, 15(6), 1996, s. 557-572.
47. Huango G., Yin G., Dai G.: Chaotic behavior of a stick slip model for rockburst. Disaster Advances, 3(4), 2010, s. 526-530.
48. Ivanov A.P.: Bifurcations associated with grazing collisions. In Nonlinear Dynamics: New Theoretical and Applied Results. (Ed. J. Awrejcewicz) Akademie Verlag, New York 1995.
49. Ivanov A.P.: Bifurcations in impact systems. Chaos, Solitons and Fractals 7, 1996, 1615-1634.
50. Janin O., Lamarque C.-H.: Comparison of several numerical methods for mechanical systems with impacts. International Journal for Numerical Methods in Engineering, 51(9), 2001, s. 1101-1132.
51. Johnson K.L.: Contact Mechanics. Cambridge University Press, Cambridge 1985.
52. Kalker J.J.: A fast algorithm for the simplified theory of rolling contact, Vehicle Systems Dynamics, 11(1), 1982, s. 1-13.
53. Kalker J.J.: Three-dimensional Elastic Bodies in Rolling Contact, Kluwer, Dordrecht, 1990.
54. Kane T.R., Levinson D.A.: Realistic mathematical modeling of the rattleback. International Journal of Non-Linear Mechanics, 17(3), 1982, s. 175-186.
55. Kang J., Krousgrill C.M.: The onset of friction-induced vibration and spragging. J. Sound Vib., 329(17), 2010, s. 3537-3549.
56. Kireenkov A.A.: About the motion of the symmetric rigid solid along the plane. 8th Conference on DSTA, Łódź 2005, s. 95-102.
57. Kireenkov A. A.: Rolling with sliding of the heavy rigid ball on the rubbed plane. 9th Conference on DSTA, Łódź 2007, s. 211-218.
58. Kireenkov A. A.: Coupled models of sliding and rolling friction. Doklady Physics, 53(4), 2008, s. 233-236.
59. Kireenkov A. A.: Combined model of sliding and rolling friction in dynamics of bodies on a rough plane. Mechanics of Solids, 43(3), 2008, s. 412-425.
60. Kosenko I., Aleksandrov E.: Implementation of the Contensou-Erisman model of friction in frame of the Hertz contact problem on Modelica. 7th Modelica Conference, Como, Italy, 2009, s. 288-298.
61. Kudra G., Awrejcewicz J.: Mathematical modelling and numerical simulations of the Celtic stone. 10th Conference on DSTA, Łódź 2009, s. 919-928.
62. Kudra G., Awrejcewicz J.: A wobblestone modelling with coupled model of sliding friction and rolling resistance. XXIV Symposium 'Vibrations in Physical Systems', Poznan - Bedlewo, 2010, s. 245-250.
63. Kudra G., Awrejcewicz J.: Mathematical modelling and numerical analysis of regular and chaotic dynamics of the Celtic stone lying on the vibrating base. 7th European Nonlinear Dynamics Conference (ENOC), Rome, 2011.
64. Kudra G., Awrejcewicz J.: Tangens hyperbolicus approximations of the spatial model of friction coupled with rolling resistance. Int. J. Bifurcation and Chaos, 2011 21(10), 2011, s. 2905-2917.
65. Kudra G., Awrejcewicz J.: Bifurcational dynamics of a two-dimensional stick-slip system, Differential Equations and Dynamical Systems, praca przyjęta do druku.
66. Leine R.I., van Campen D.H.: Discontinuous fold bifurcations in mechanical systems. Archive of Applied Mechanics, 72, 2002, s. 138-146.
67. Leine R.I., Glocker Ch.: A set-valued force law for spatial Coulomb-Contensou friction. European Journal of Mechanics, A/Solids, 22(2), 2003, s. 193-216.
68. Leine R.I., Nijmeijer H.: Dynamics and Bifurcations of Non-smooth Mechanical Systems. Springer Verlag, Berlin, New York 2004.
69. Leine R.I., Le Saux C., Glocker Ch.: Friction models for the rolling disk. Proceedings of the 5th EUROMECH Nonlinear Dynamics Conference (ENOC 2005), Eindhoven, The Netherlands, 2005.
70. Leine R.I., Van De Wouw N.: Stability and Convergence of Mechanical Systems with Unilateral Constraints. Springer-Verlag, Berlin, New York 2008.
71. Leine R.I.: Measurements of the finite-time singularity of the Euler disk. 7th EUROMECH Solid Mechanical Conference, Lisbon, Portugal 2009.
72. Lindberg J., Longman R.W.: On the dynamic behavior of the wobblestone. Acta Mechanica, 49(1-2), 1983, s. 81-94.
73. Ma O., Liang J., Fillmore S.: A 2D bristle friction force model for contact dynamics simulation. ASME Dynamic Systems and Control Conference, Hollywood, CA, 2010, s. 501-508.
74. Magnus K.: Zur Theorie der keltischen Wackelsteine. Zeitschrift für angewandte Mathematik und Mechanik, 5, 1974, s. 54-55.
75. Markeev A.P.: On the dynamics of a solid on an absolutely rough plane. Regular and Chaotic Dynamics, 7(2), 2002, s. 153-160.
76. Moreau J.J.: Unilateral contact and dry friction in finite freedom dynamics. Non-smooth Mechanics and Applications (red. Moreau J.J. i Panagiotopoulos P.). Springer-Verlag, Wiedeń 1988, s. 1-82.
77. Möller M., Leine R.I., Glocker Ch.: An efficient approximation of orthotropic set-valued laws of normal cone type. Proceedings of the 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal, 2009.
78. Osiński Z.: Mechanika ogólna. PWN, Warszawa 1994.
79. Pfeiffer F., Glocker Ch.: Multibody dynamics with unilateral contacts. Willey, New York 1996.
80. Pfeiffer F.: The idea of complementarity in multibody dynamics. Archive of Applied Mechanics, 72(11-12), 2003, s. 807-816.
81. Polach O.: A fast wheel–rail forces calculation computer code. Vehicle Systems Dynamics (Suppl.), 33, 1999, s. 728-739.
82. Putelat T., Dawes J.H.P., Willis J.R.: Sliding modes of two interacting frictional interfaces. Journal of the Mechanics and Physics of Solids, 55(10), 2007, s. 2073-2105.
83. Putelat T., Dawes J.H.P., Willis J.R.: Regimes of frictional sliding of a spring-block system. Journal of the Mechanics and Physics of Solids, 58(1), 2010, s. 27-53.
84. Quinn. D.D.: An impact oscillator with finite time collisions. DETC' 99, ASME, Design Engineering Technical Conference, Las Vegas, Nevada, 1999, CD-ROM, 7 stron.
85. Shaw S.W., Holmes P.: A periodically forced piecewise linear oscillator. Journal of Sound and Vibration, 90, 1983, s. 129-155.
86. Shen Z.Y., Hedrick J.K., Elkins J.A.: A comparison of alternative creep force models for rail vehicle dynamic analysis, Proceedings of the 8th IAVSD Symposium, Cambridge, 1983, s. 591-605.
87. Simpson D.J.W.: Bifurcations in Piecewise-Smooth Continuous Systems World Scientific, Singapore 2010.
88. Stewart D.E. & Trinkle J.C.: An implicit time-stepping scheme for rigid body dynamics with inelastic collisions and Coulomb friction. International Journal for Numerical Methods in Engineering, 39(15), 1996, s. 2673-2691.
89. Svedenius J.: Tire Models for Use in Braking Application. Praca licencjacka, Lund University, 2003.
90. Tabor D.: The mechanism of rolling friction. II. The elastic range. Proc. R. Soc. Lond., A(229), 1955, s. 198-220.
91. Virgin L.N., Begley C.J.: Grazing bifurcations and basins of attraction in an impact-friction oscillator. Physica D 130, 1999, s. 43-57.
92. Walker G.T.: On a dynamical top. Q. J. Pure App. Math., 28, 1896, s. 175-184.
93. Wojewoda J., Stefański A., Wiercigroch M., Kapitaniak T.: Hysteretic effects of dry friction: modelling and experimental studies. Philosophical Transitions of the Royal Society A: Mathematical, Physical and Engineering Science, 366(1866), 2008, s. 747-765.
94. Wood S.N.: Minimising model fitting objectives that contain spurious local minima by bootstrap restarting. Biometrics, 57, 2001, 240-244.
95. Zhuravlev V.P.: The model of dry friction in the problem of the rolling of rigid bodies. Journal of Applied Mathematics and Mechanics, 62(5), 1998, s. 705-710.
96. Zhuravlev V.P., Kireenkov A.A.: Padé expansions in the two-dimensional model of Coulomb friction. Mechanics of Solids, 40(2), 2005, s. 1-10.
97. Zhuravlev V.P., Klimov D.M.: Global motion of the celt. Mechanics of Solids, 43(3), 2008, s. 320-327.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-article-LODD-0001-0027