Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
International Symposium on Compressor and Turbine Flow Systems - Theory and Application Areas "SYMKOM" (10 ; 26-28.10.2011 ; Łódź, Polska)
Języki publikacji
Abstrakty
The design of a small turbo-generator to produce electricity in the range from a few kWs requires the use of an aerostatic or aerodynamic gas bearing system. The theoretical analysis and the experimental test at the present stage of the study show that such highly rotating constructions are feasible. The problem consists in the optimal design selection from the viewpoint of the machine reliability and the adjustments are connected to the diminution in static thrust and lateral loads of the bearings by a correct design of the turbine flow structure and a correct selection of the gas bearing type.
Czasopismo
Rocznik
Tom
Strony
355--365
Opis fizyczny
Bibliogr. 5 poz.
Twórcy
autor
autor
autor
autor
- Institute of Turbomachinery, Technical University of Łódź, eliza.tkacz@edu.p.lodz.pl
Bibliografia
- [1] Kozanecki, Z.: Rotating Systems of the Low and Medium Power Turbomachinery, (in Polish), Radom, ITE Publishing House, 2008.
- [2] Kozanecki Z. and Kozanecka D.: Theoretical and experimental investigations of oil-free support systems to improve the reliability of industrial turbomachinery, The 8th IFToMM International Conference on Rotor Dynamics, September 12-15, KIST, Seoul, Korea, pp. 686-692, 2010.
- [3] Kozanecki, Z. and Dessornes, O., et al: Three Technological Bricks for a Micro Power Generation, Procds. of 5th International Workshop on Micro Technology for Power Generation and Energy Conversion Applications, Power-MEMS, Tokyo, 2005.
- [4] Kozanecki, Z. and Miazga, K., et al: Design, manufacture, assembly and testing of second-generation foil bearings with polymer coatings for high-speed micro ORC turbogenerator, (in Polish) , rapport Institute of Fluid-Flow Machinery PASci, Gdańsk, 2011.
- [5] Powell, J.: The design of aerostatic bearings , Brighton: The Machinery Publishing Co. Ltd., 1970.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-LOD9-0027-0055