Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
A method for optimization (with some limitations) of thin-walled beams with a trapezoidal cross-section is presented in the paper. Beams are subjected to bending. They undergo local buckling in the elastic range. The dimensions of beam cross-section walls are optimized. Two cases was consider. In the first one the smallest weight of the beam (the smallest area cross-section) for given critical buckling moment was calculated. In the second case the maximum critical moment for given area of the cross-section was calculated. Next, the ultimate bending moment in the postcritical state is found for the optimized beams.
Czasopismo
Rocznik
Tom
Strony
37--48
Opis fizyczny
Bibliogr. 5 poz.
Twórcy
autor
autor
autor
- Technical University of Łódź, Department of Strength of Materials and Structures Stefanowskiego 1/15, 90-924 Łódź, Poland
Bibliografia
- [1] Królak M. (Ed.), Postcritical states and the limit load-carrying capacity of thin-walled girders with flat walls, PWN, Warsaw-Łódź, 1990 (in Polish)
- [2] Kołakowski Z., Kowal-Michalska K., Selected problems of instabilities in composite structures, Technical University of Łódź, Łódź, 1999
- [3] Wolmir A. S., Stability of deformable structures, Nauka, Moscow, 1967 (in Russian)
- [4] Gałkiewicz T., Approximate stability analysis of rib walls of the box girder subjected to bending with compression or tension, Proceedings of Symposium on Stability of Structures, Łódź, 1979 (in Polish)
- [5] Magnucki K., Oswald M., Stability and optimization of three-layer structures, Institute for Sustainable Technologies, Radom, 2002 (in Polish)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-LOD9-0011-0015