PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Diagnostic application for development of custom ATCA carrier board for LLRF

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The Advanced Telecommunications Computing Architecture (ATCA) standard describes a powerful and efficient platform. With multiple integrated solutions like redundancies and intelligent control mechanisms this technology is characterized with reliability estimated at the level of 99.99999 percent. These features make the standard perfect for use in projects like the Free Electron Laser in Hamburg (FLASH) and the X-ray Free Electron Laser (X-FEL) in order to help them meet the requirements of high availability and reliability. The ATCA standard incorporates advanced control systems defined in the Intelligent Platform Management Interface (IPMI) specification as one of the key elements. The entire ATCA implementation retains its functionality as long as the IPMI remains operational. The complexity level of the application increases, which results in preparing it to run and debugging being more difficult to perform. At the same time, only scrupulous elimination of any kind of possible deficiencies can enable the ATCA implementation to offer the desired level of reliability. Thus, diagnostics become crucial, which creates a need for additional tools performing these tasks during the preparations of both hardware and software for the ATCA application. The paper presents application aiding in development of the prototype Carrier Board by enabling the user of external PC station to perform diagnostic and control activities over the Board. It helps in examining all its components at the stage of running the Board, as well as in further operation analysis.
Twórcy
autor
autor
autor
Bibliografia
  • [1] AdvancedTCA PICMG 3.0 Revision 2.0, "AdvancedTCA Base Specification", 28 October 2005
  • [2] Intel Hewlett-Packard NEC DELL, "Intelligent Platform Management Specification version 1.5", Document Revision 1.1, 20 February 2002
  • [3] Zawada, A., Makowski, D., Jezynski, T., Simrock, S., Napieralski, A., "ATCA Carrier Board with IPMI supervisory circuit", Mixed Design of Integrated Circuits and Systems, 2008. MIXDES 2008. 15th International Conference on 19-21 June 2008 Page(s).101 - 105
  • [4] Makowski, D., Koprek, W., Jezynski, T., Piotrowski, A., Jablonski, G. Jalmuzna, W., Simrock, S. "Interfaces and communication protocols in ATCA-based LLRF control systems", Nuclear Science Symposium Conference Record, 2008. NSS '08. IEEE, 19-25 Oct. 2008 Page(s):32-37
  • [5] Zawada, A.; Makowski, D.; Jezynski, T.; Simrock, S.; Napieralski, A. "Prototype AdvancedTCA Carrier Board with three AMC bays", Nuclear Science Symposium Conference Record, 2008. NSS '08. IEEE, 19-25 Oct. 2008 Page(s):53 - 57
  • [6] Atmel Corporation, "ATmega640/1280/1281/2560/2561", Rev. 2549L, August 2007, http://www.atmel.com/dvn/resources/prod documents/doc2549.pdf
  • [7] Xilmx Incorporation, "Spartan-3 FPGA Family Data Sheet", June 2008, http://www.xilinx.com/support/documentalion/data sheets/ds099.pdf
  • [8] B. Eckel, "Thinking in Java", 4th Edition, Prentice Hall, 2006
  • [9] I. Darwin, "Java Cookbook" O'Reilly, 2001
  • [10] Maxim Integrated Products, "MAX6625/MAX6626", Rev. 4, October 2006, http://datasheets.maxim-ic.com/en/ds/MAX6625-MAX6626.pdf
  • [11] Maxim Integrated Products, "MAX6683", Rev. 1, July 2004, http://datasheets.maxim-ic.com/en/ds/MAX6683.pdf
  • [12] Artesyn Technologies, "ATC210 Dual Input Bus Converter I2C Serial Bus Interface Application Note 206", 16 August 2006, www.artesvn.com/assets/an atc2IO software 1199485474 techref.pdf
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-LOD6-0019-0021
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.