PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Exhaust Hood for the Steam Turbines of Single - Flow Arrangement

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The effect of the front wall inclination and the mutual position of casing and diffuser on thermodynamical losses have been investigated. The effect of the outer-casing shape variation was studied. In addition, the influence of taking-out for bearing cover on the loss factor has also been tasted. The computational model employed as the input a measured inlet velocity profile. Some internal rib and reinforcement were neglected in the model. A 3D model was used, but the symmetry of the flow field was taken into account. Only half of the flow channel was being treated in the computation. The results were compared with the available experimental data.
Twórcy
autor
  • ŠKODA POWER s. r. o., Plzeň, Czech Republic
autor
  • ŠKODA POWER s. r. o., Plzeň, Czech Republic
  • ŠKODA POWER s. r. o., Plzeň, Czech Republic
autor
  • ZČU Plzeň, Czech Republic
Bibliografia
  • [1] Tajč, L., Bednář, L., Polanský, J., Kňourek, J., Feldberg, L. A.: “Flow Computations and Experimental Investigation of Exhaust Hoods”, CMP Turbomachinery, No 115, Symkom´99, Łódź 1999.
  • [2] Tajč, L., Bednář, L., Polanský, J., Goudkov, E. I.: “Exhaust Hoods of Double-flow Arrangement”, 4th European Conference on Turbomachinery, 2000.
  • [3] Tajč, L., Polanský, J., Synáč, J.: “Experimental Investigation of Low-pressure Steam Turbine Exhaust Hood”, CMP Turbomachinery, No 122, Symkom´02, Łódź 2002.
  • [4] Hoznedl, M., Krejčík, J., Tajč, L., Linhart, J.: “Computational Modelling of Flow in an Exhaust Hood of a Steam Turbine and Comparison with Experimental Results”, Power System Engineering – Fluid Flow – Heat Transfer, UWB in Pilsen, 2004.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-LOD5-0007-0026
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.