Normy ASTM stosowane w badaniach mikrostruktury

• Autorzy: Hübner K. J.
• Języki publikacji: PL

Słowa kluczowe

PL

normy ASTM; standardy międzynarodowe; badania mikrostruktury; mikrostruktura

EN

ASTM norms; international standards; microstructure investigation; microstructure

• Wydawca: Roble Sp. z o.o.
• Czasopismo: LAB Laboratoria, Aparatura, Badania
• Rocznik: 2007
• Tom: R. 12, nr 5
• Strony: 17--19
• Opis fizyczny: Bibliogr. 33 poz.

Twórcy

autor

Hübner K. J.

• Instytut Odlewnictwa w Krakowie, Laboratorium Badania Struktury i Własności Mechanicznych

Bibliografia

• 1.E0003-01 Guide for Preparation of Metallographic Specimens
• 2.E0007-03 Terminology Relating to Metallography
• 3.E0045-05 Test Methods for Determining the Inclusion Contentof Steel
• 4.E0112-96R04E01 Test Methods for Determining Average Grain Size
• 5.E0340-00E01 Test Method for Macroetching Metals and Alloys
• 6.E0381-01 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
• 7.E0384-05A Test Method for Microindentation Hardness of Materials
• 8.E0407-99 Practicefor Microetching Metals and Alloys
• 9.E0562-05 Test Method for Determining Volume Fraction by Systematic Manual Point Count
• 10.E0766-98R03 Practice for Calibrating the Magnification of a Scanning Electron Microscope
• 11.E0768-99R05 Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
• 12.E807-96 Metallographic Laboratory Evaluation
• 13.E0883-02 Guide for Reflected\Light Photomicrography
• 14.E0930-99 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section ALA Grain Size
• 15.E0963-95R04 Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
• 16.E0986-04 Practice for Scanning Electron Microscope Beam Size Characterization
• 17.E1077-01R05 Test Methods for Estimating the Depth of Decarburization of Steel Specimens
• 18.E1180-03E01 Practice for Preparing Sulfur Prints for Macrostructural Examination
• 19.E1245-03 Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
• 20.E1268-01 Practice for Assessing the Degree of Banding or Orientation of Microstructures
• 21.E1351-01 Practice for Production and Evaluation of Field Metallographic Replicas
• 22.E1382-97R04 Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
• 23.E1508-98R03 Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
• 24.E1558-99R04 Guide for Electrolytic Polishing of Metallographic Specimens
• 25.E1920-03 Guide for Metallographic Preparation of Thermal Sprayed Coatings
• 26.E1951-02 Guide for Calibrating Reticles and Light Microscope Magnifications
• 27.E2014-99R05 Guide on Metallographic Laboratory Safety
• 28.E2015-04 Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
• 29.E2109-01 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
• 30.E2142-01 Test Method for Rating and Classifying Inclusions id Steel Using the Scaning Electron Microscope
• 31.E2283-03 Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
• 32.F1854-01 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
• 33.A247-06 Standard Test Method for Evaluating the Microstrutucture of Graphite in Iron Castings