Simulation of axial displacement of the individual motor-driven spindle

• Autorzy: Zięba J.
• Konferencja: International Textile Conference IMTEX 2000 (IV ; 5-6.06.2000 ; Łódź, Poland)
• Języki publikacji: EN

Abstrakty

EN

This paper presents a mathematical model of the IMDS spindle of a ring spinning frame, in which the axial displacement of the motor rotor is an output signal. On connecting the motor to the power supply source, the individual motor-driven spindle rotor is pulled into the asynchronous motor stator. Selected results of simulation investigations of the model are presented in the form of curves of the axial force and axial displacement.

Słowa kluczowe

EN

motor-driven spindle; ring spinning frame; motor rotor; axial force; axial displacement; mathematical model

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Zeszyty Naukowe. Włókiennictwo / Politechnika Łódzka
• Rocznik: 2000
• Tom: z. 58
• Strony: 323--329
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Zięba J.

• Department of Clothing Technology and Measuring Systems, Technical University of Łódź

Bibliografia

• [1] Jordan A., Jodkowski W., Analysis of Operation of the Inductive Transducer Considering the Dissipation Flux, Archiwum Elektrotechniki Vol. XXVIII, book 104-2(1978).
• [2] Kluszczyński К., Miksiewicz R, Drak В., Kudła J., The Influence of Width of Additional Ring in Rotor of Squirrel-Cage Motor Upon its Effectiveness in Suppressing Parasitic Torques, Scientific Bulletin of Lodz Technical University , Electricity, book 92, (789), (1998) 103-110.
• [3] Pao Y.C., Engineering Analysis-Interactive Methods and Programs with Fortran, QiuckBasic, Matlab, and Mathematica, CRC, Boca Raton New York Washington, D C. 1999, 360.
• [4] Lynagh N., Rahejat H., Ebrahimi M., Aini R, Bearing induced vibration in precision high speed routing spindles. Machine Tools & Manufacture, 40 (2000), 561-577.
• [5] Paszek W., Nonstationary States of AC Current Electrical Machines, WNT, Warszawa 1986, 595.
• [6] Prokop J., Simulation models of electrical machines integrating symbolic and numeric computation, Electrical Machines in Electrical Power Industry SME’99, Publishing House of the Warsaw University of Technology, Prace Naukowe, Elektryka z.Ill, s.355-356,1999
• [7] Rusek A., Roman A., Jagiela K, Lis M., Flasza J., Slosarczyk K, Wawrzeszkiewicz J., Electrodynamic forces acting on the rotor bars of induction rollway motors. Electrical Engineering Review Vol. 73, 9 (1997) 232-234.
• [8] Schönung В., Bay E. Einige Aspekte zur Wirtschaftlichkeit von Ringspinnnmaschinen nach dem neuesten Stand der Entwicklung Textil Praxis International 1991 nr 1.
• [9] Schönung В., Bay E., First results with individual motor-driven spindeles. SKF- Textilmaschinen-Komponenten GmbH.
• [10] Vu H.V, Esfandiari R.S., Dynamic Systems: Modeling and Analysis, McGraw-Hill Interantional Editions 1998.
• [11] Zięba J., 1st Measurement of Linear Displacement of the Individual Motor-Driven Spindle (IMDS), Scientific Conference of the Textile Faculty 1998, Materials of the 1“ Scientific Conference of the Textile ’98, Lodz Technical University, 6-7 March 1998, Lodz, p. 29-30.
• [12] Zięba J., Individual Drive of Spindles (IMDS) of the Ring Spinning, Scientific Bulletin of Lodz Technical University, Textiles, book 52, (722) (1995) 155-163.
• [13] Zięba J., Controlling the Individual Drive of the Ring Spinning Frame Spindles (IMDS), Scientific Bulletin of Lodz Technical University, Textiles, book 54, (760) (1996) 77-85.