The application of coordinate measuring machines in the garment industry

• Autorzy: Lukic S. A. , Rakic M. J.
• Konferencja: International Conference MTE 2000: Metrology in Textile Engineering (II ; 23-24.11.2000 ; Łódź, Poland)
• Języki publikacji: EN

Abstrakty

EN

By measuring of the dummy-model it is possible to obtain data for making its virtual model which enables simulating the dummies having different dimensions. The dummy measuring can be conducted by using either contact or contactless methods. The contact methods are assumed to be direct measuring the dummy dimensions and among the contactless methods are worth mentioning stereophotogravimetry and three-dimensional scanning. In this study the contact measuring methods were used by application of coordinate measuring machine. Sections of the dummy obtained by measuring were used as the input data for forming interpolative polynomial. AutoCAD software was applied for the calculation of surface model of the dummy, modeling of wire model as well as surface model. Analysis of obtained "wire model" shows that it is possible to provide dummies having remaining garment sizes by using procedure of geometrical transformations. An object of this study was to answer to a question if it is possible to apply CMM in the garment industry.

Słowa kluczowe

EN

CMM; geometric modellig; garment industry

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Zeszyty Naukowe. Włókiennictwo / Politechnika Łódzka
• Rocznik: 2000
• Tom: z. 59
• Strony: 189--194
• Opis fizyczny: Bibliogr. 9 poz.

Twórcy

autor

Lukic S. A.

• Faculty of Technology and Metallurgy, Department of Textile Engineering, University of Belgrade, Karnegijeva 4, Yugoslavia

autor

Rakic M. J.

• Faculty of Mechanical Engineering, University of Belgrade,27. Marta 80, Yugoslavia

• Faculty of Technology and Metallurgy, Department of Textile Engineering, University of Belgrade, Karnegijeva 4, Yugoslavia

Bibliografia

• [1] Bartles R.H., Beatty J.C., Barsk, B.A., An Introduction to Splines for Use in Computer Graphics & Geometric Modelling, Morgan Kufmann Publishers, Inc., Los Altos, California, 1987.
• [2] Henkes D., CMM Programming I International Seminar “Flexible Automation in Production Metrology”, Mechanical Engineering Faculty, Proceedings, pp. 75-89, Belgrade, 1988.
• [3] Majstorovič V., Rakič M., Stanič J., Inspekcija krivih povr {ina-specijalni slučaj, XVII JUPITER konferencija, Kopaonik, 1991.
• [4] Majstorovič V., Rakič M., Stanič J., Geometrijsko modeliranje pomoču NUMM, I Medjunarodni naučno-stručni skup: “Tečka ma- činogradnja”, str. 482-487, Vmjačka banja, 1993.
• [5] Milovanovič G., Numerička analiza II deo, Naučna knjiga, Beograd, 1991.
• [6] JUS F.G0.004, Jugoslovenski standardi, Beograd, 1979.
• [7] Raker D., Rice H., Inside AutoCAD - The Complete Guide to AutoCAD, New Riders Publishing, Thousand Oaks-Califomia, 1989.
• [8] Stojkovič S., Majstorovič V., Rakič M., CAD modeliranje na bazi merenja, 21. JUPITER konferencija, 8. Simpozijum CAD/CAM, Zbomik radova, str. 2.75-2.80, Beograd, 1995.
• [9] Yamaguchi F., Curves and Surfaces in Computer Aided Geometric Design, Springer-Verlag, Berlin, Haidelberg, 1988.