Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2% mol. Nb2O5 ceramics were prepared from high purity synthesized ceramic powders by a classical sintering method. Internal friction Q-1 and Young’s modulus E were measured as a function of temperature for the sample in the initial state and after ă irradiation 5 R dose. Two internal friction peaks P1 and P2, related to oxygen vacancies and domain walls, respectively, were observed in all measurements. In addition, a minimum in modulus E associated with a phase transition internal friction peak P3 appearing at curie temperature was observed. The internal friction results indicate the changes of concentration of oxygen vacancies and the domain structure, which will be helpful in the utilities of the PZT ceramics in transducers, ultrasonic generators, wave filters, etc.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
69--78
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
autor
- University of Silesia, Faculty of Computer and Material Sciences, Department of Material Science 3, Żeromskiego St., 41-200 Sosnowiec, POLAND
autor
- University of Silesia, Faculty of Computer and Material Sciences, Department of Material Science 3, Żeromskiego St., 41-200 Sosnowiec, POLAND
autor
- University of Silesia, Faculty of Computer and Material Sciences, Department of Material Science 3, Żeromskiego St., 41-200 Sosnowiec, POLAND
Bibliografia
- [1] B. Jaffe, W. R. Jr. Cook, H. Jaffe, Piezoelectric Ceramics, Academic Press, p.271, London and New York 1971.
- [2] J. Wallaschek, Piezoelectric ultrasonic motors, J. Intell. Mat. Syst. Structures, 6, 71-73, 1995.
- [3] Y. Yamayoshi, H. Hirose, Ultrasonic motors not using mechanical friction force, Int. J. Appl. Electr. Mat., 3,179-182, 1992.
- [4] Y. Tomikawa, T. Ogasawa, Ultrasonic motors: construction, characteristics, applications, Ferroelectrics, 91, 13-178, 1989.
- [5] A. Kumada, A piezoelectric ultrasonic motor., Jap. J. Appl. Phys., 24, 739-741, 1985.
- [6] E. Flint, C. Liang, C. A. Rogers, Electromechanical analysis of piezoelectric stack active member power consumption, J. Intell. Mat. Syst. Structures, 6, 117-124, 1995.
- [7] F. P. Sun, Z. Chandhry, C. Liang, C. A. Rogers, Truss structure integrity identification using PZT sensor actuator, J. Intell. Mat. Syst. Structures, 6, 134-139, 1995.
- [8] B. Noheda, D. E. Cox, G. Shirane, J. A. Gonzalo, L. E. Cross, S. E. Park, Applied Physics Letters, 74(14), 2059-2061, 1999.
- [9] S. A. Gridnev, Ferroelectrics, 112, 107-127, 1990.
- [10] A. Puskar, Internal Friction of Materials, Cambridge International Science Publishing, Cambridge 2001.
- [11] R. Zachariasz, J. Ilczuk, A. Chrobak, Ceramics, 66, 710-715, 2001.
- [12] B. L. Cheng, M. Gabbay, M. Maglione, Y. Jorand, G. Fantozzi, Journal de Physique IV, Vol. 6, 647-650, 1996.
- [13] B. Bruś, R. Zachariasz, J. Ilczuk, Physica Stat. Solidi (a), 201, 798-802, 2004.
- [14] J. Ilczuk, Molecular & Quantum Acoustics, 23, 167-174, 2002.
- [15] J. Ilczuk, J. Dudek, Z. Surowiak, Molecular & Quantum Acoustics, 18, p.101, 1997.
- [16] A. S. Nowick, B. S. Berry, Anelastic Relaxation in Crystalline Solids, Academic Press, Chap. 3, New York 1972.
- [17] Y. N. Wang, W. Y. Sun, X. H. Chen, H. M. Shen, B. S. Lu, Physica Stat. Solidi (a), 102, p. 279, 1987.
- [18] J. Ilczuk, J. Dudek, Z. Surowiak, Molecular & Quantum Acoustics, 19, p.108, 1998.
- [19] J. F. Delorme, P. F. Gobin, Metaux, Corr. Ind., 573, 185-192, 1973.
- [20] E. M. Bourim, H. Idrissi, B. L. Cheng, M. Gabbay, G. Fantozzi, J. De Physique, IV, 6, C8-633-636, 1996.
- [21] J. Jimenez, J. Vicente, J. Phys. D: Appl. Phys., 31, 130-136, 1998.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM8-0033-0010