PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Nowacki's double shear test in the framework of the anisotropic thermo-elasto-viscoplastic material model

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the paper, the numerical simulation of Nowacki's double shear test in the framework of recently proposed viscoplasticity theory for anisotropic solids is presented. The numerical analysis comprises the full spatial modelling and is carried out for the DH-36 steel sheet in adiabatic conditions (the analysis of anisotropic bodies can be led only on 3D models). During analyses, strain rates of order 104-107 s-1 are observed and the process time duration up to full damage (loss of continuity in the localisation zone) is around 150-300 žs. The novelty of the research is focused on the formulation that includes the anisotropy of the intrinsic microdamage process. Thus, it makes possible to obtain qualitatively and quantitatively new results compared with the existing models, like tracing the softening directions and better (closer to experiment) prediction of damage paths.
PL
W pracy przedstawiono numeryczne symulacje testu podwojnego ścinania, zaproponowanego przez prof. Nowackiego, w ramach sformułowania teorii lepkoplastyczności dla anizotropowych ciał stałych. Analizy numeryczne obejmują modele trójwymiarowe i są wykonane dla stali DH-36 w warunkach adiabatycznych (analiza ciał anizotropowych może być przeprowadzona wyłącznie na modelach trojwymiarowych). W trakcie analiz obserwuje się prędkości deformacji rzędu 104-107 s-1, a czas trwania procesu do całkowitego zerwania próbki (utraty ciągłości w strefie lokalizacji) jest z przedziału 150-300 žs. Oryginalność badań wynika z faktu uwzględnienia w definicji konstytutywnego modelu anizotropowego wewnętrznego procesu mikrouszkodzeń. W rezultacie, uzyskane wyniki dają jakościowo i ilościowo nowy obraz procesu, w szczegolności umożliwiają śledzenie kierunkow osłabienia oraz dokładniejsze (bliższe rezultatom eksperymentalnym) odwzorowanie ścieżki zniszczenia.
Rocznik
Strony
973--1001
Opis fizyczny
Bibliogr. 52 poz., rys.
Twórcy
autor
autor
Bibliografia
  • 1. Abaqus Version 6.9ef1 Theory Manual, 2010
  • 2. Abu Al-Rub R.K., Voyiadjis G.Z., 2006, A finite strain plastic-damage model for high velocity impact using combined viscosity and gradient localization limiters: Part I – theoretical formulation, International Journal of Damage Mechanics, 15, 4, 293-334
  • 3. Campbell J.D., 1953, The dynamic yielding of mild steel, Acta Metallurgica, 1, 6, 706-710
  • 4. Dienes J.K., 1979, On the analysis of rotation and stress rate in deforming bodies, Acta Mechanica, 32, 217-232
  • 5. Dornowski W., 1999, Influence of finite deformations on the growth mechanism of microvoids contained in structural metals, Archives of Mechanics, 51, 1, 71-86
  • 6. Dornowski W., Perzyna P., 2002a, Analysis of the influence of various effects on cycle fatigue damage in dynamic process, Archive of Applied Mechanics, 72, 418-438
  • 7. Dornowski W., Perzyna P., 2002b, Localized fracture phenomena In thermo-viscoplastic flow process under cyclic dynamic loadings, Acta Mechanica, 155, 233-255
  • 8. Dornowski W., Perzyna P., 2006, Numerical investigation of localized fracture phenomena in inelastic solids, Foundations of Civil and Environmental Engineering, 7, 79-116
  • 9. Gary G., Nowacki W.K., 1994, Essai de cisaillement plan appliqu´e `a des tˆoles minces, Journal de Physique IV, 4, C8, 65-70
  • 10. Glema A., 2004, Analiza natury falowej zjawiska lokalizacji odkształceń plastycznych w ciałach stałych, Publishing House of Poznan University of Technology, Rozprawy, 379 [in Polish]
  • 11. Glema A., Łodygowski T., Perzyna P., 2008, Numerical investigation of dynamic shear bands in inelastic solids as a problem of mesomechanics, Computational Mechanics, 41, 2, 219-229
  • 12. Glema A., Łodygowski T., Perzyna P., Sumelka W., 2006, Constitutive anisotropy induced by plastic strain localization, In: 35th Solid Mechanics Conference, Kraków, Poland, September 4-8, 139-140
  • 13. Glema A., Łodygowski T., Sumelka W., 2010, Towards the modelling of an anisotropic solids, Computational Methods in Science and Technology
  • 14. Glema A., Łodygowski T., Sumelka W., Perzyna P., 2009, The numerical analysis of the intrinsic anisotropic microdamage evolution in elastoviscoplastic solids, International Journal of Damage Mechanics, 18, 3, 205-231
  • 15. Grebe H.A., Pak H.-R., Meyers M.A., 1985, Adiabatic shear localization in titanium and Ti-6 pct Al-4 pct V alloy, Metallurgical and Materials Transactions A, 16, 5, 761-775
  • 16. Klepaczko J.R., 1990, Behavior of rock like materials at high strain rates In compression, International Journal of Plasticity, 6, 415-432
  • 17. Klepaczko J.R., 1994, An experimental technique for shear testing at high and very high strain rates. The case of mild steel, International Journal of Impact Engineering, 15, 25-39
  • 18. Klepaczko J.R., 2007, Constitutive relations in dynamic plasticity, pure metals and alloys, Advances in Constitutive Relations Applied in Computer Codes, CISM, Udine, Italy, July 23-27
  • 19. Klepaczko J.R., Nguyen H.V., Nowacki W.K., 1999, Quasi-static and dynamic shearing of sheet metals, European Journal of Mechanics – A/Solids, 18, 271-289
  • 20. Lee E.H., 1969, Elastic-plastic deformation at finite strain, ASME Journal of Applied Mechanics, 36, 1-6
  • 21. Łodygowski T., 1995, On avoiding of spurious mesh sensitivity in numerical analysis of plastic strain localization, Computer Assisted Mechanics and Engineering Sciences, 2, 231-248
  • 22. Łodygowski T., 1996, Theoretical and Numerical Aspects of Plastic Strain Localization, Publishing House of Poznan University of Technology, 312, D.Sc.Thesis
  • 23. Łodygowski T., Glema A., Sumelka W., 2008, Anisotropy induced by evolution of microstructure in ductile material, In: 8th World Congress on Computational Mechanics (WCCM8), 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy,June 30 – July 5
  • 24. Łodygowski T., Perzyna P., 1997a, Localized fracture of inelastic polycrystalline solids under dynamic loading process, International Journal Damage Mechanics, 6, 364-407
  • 25. Łodygowski T., Perzyna P., 1997b, Numerical modelling of localized fracture of inelastic solids in dynamic loading process, International Journal for Numerical Methods in Engineering, 40, 4137-4158
  • 26. Łodygowski T., Perzyna P., Lengnick M., Stein E., 1994, Viscoplastic numerical analysis of dynamic plastic shear localization for a ductile material, Archives of Mechanics, 46, 4, 541-557
  • 27. Marsden J.E., Hughes T.J.H., 1983, Mathematical Foundations of Elasticity, Prentice-Hall, New Jersey
  • 28. Narayanasamy R., Parthasarathi N.L., Narayanan C.S., 2009, Effect of microstructure on void nucleation and coalescence during forming of three different HSLA steel sheets under different stress conditions, Materials and Design, 30, 1310-1324
  • 29. Nemat-Nasser S., Guo W.-G., 2003, Thermomechanical response of DH-65 steel plates over a wide range of strain rates and temperatures, Mechanics of Materials, 35, 1023-1047
  • 30. Nemes J.A., Eftis J., 1991, Several features of a viscoplastic study of plateimpact spallation with multidimensional strain, Computers and Structures, 38, 3, 317-328
  • 31. Nemes J.A., Eftis J., 1993, Constitutive modelling of the dynamic fracture of smooth tensile bars, International Journal of Plasticity, 9, 2, 243-270
  • 32. Nowacki W.K., Gadaj P., Luckner J., 2006, Effect of strain rate on ductile fracture, Report IPPT, Warsaw, January
  • 33. Nowak Z., Nowacki W.K., Perzyna P., Pęcherski R.B., 2007, Modelling of localized fracture phenomena in high strength steels, In: 10th European Mechanics of Materials Conference EMMC10, Kazimierz Dolny, Poland, June 11-14
  • 34. Perzyna P., 1963, The constitutive equations for rate sensitive plastic materials, Quarterly of Applied Mathematics, 20, 321-332
  • 35. Perzyna P., 1966, Fundamental problems in viscoplasticity, Advances in Applied Mechanics, 9, 243-377
  • 36. Perzyna P., 1986a, Constitutive modelling for brittle dynamic fracture In dissipative solids, Archives of Mechanics, 38, 725-738
  • 37. Perzyna P., 1986b, Internal state variable description of dynamic fracture of ductile solids, International Journal of Solids and Structures, 22, 797-818
  • 38. Perzyna P., 1994, Instability phenomena and adiabatic shear band localization in thermoplastic flow process, Acta Mechanica, 106, 173-205
  • 39. Perzyna P., 1995, Interactions of elastic-viscoplastic waves and localization phenomena in solids, In: IUTAM Symposium on Nonlinear Waves in Solids, Wegner J.L. and Norwood F.R. (Edit.), Victoria, Canada, August 15-20, 114-121
  • 40. Perzyna P., 2005, The thermodynamical theory of elasto-viscoplasticity, Engineering Transactions, 53, 235-316
  • 41. Perzyna P., 2006, The thermodynamical theory of elasto-viscoplasticity accounting for microshear banding and induced anisotropy effects, In: 35th Solid Mechanics Conference, Kraków, Poland, September 4-8, 35-36
  • 42. Perzyna P., 2008, The thermodynamical theory of elasto-viscoplasticity accounting for microshear banding and induced anisotropy effects, Mechanics, 27, 1, 25-42
  • 43. Pęcherski R.B., Nowacki W.K., Nowak Z., Perzyna P., 2009, Effect of strain rate on ductile fracture. A new methodology, In: Workshop, Dynamic Behaviour of Materials, In Memory of Our Friend and Colleague Prof. J.R. Klepaczko, Metz, France, May 13-15, 65-73
  • 44. Rusinek A., Klepaczko J.R., 2009, Experiments on heat generated Turing plastic deformation and stored energy for TRIP steels, Materials and Design, 30, 1, 35-48
  • 45. Seaman L., Curran D.R., Shockey D.A., 1976, Computational models for ductile and brittle fracture, Journal of Applied Physics, 47, 11, 4814-4826
  • 46. Shima S., Oyane M., 1976, Plasticity for porous solids, International Journal of Mechanical Sciences, 18, 285-291
  • 47. Sumelka W., 2009, The Constitutive Model of the Anisotropy Evolution for Metals with Microstructural Defects, Publishing House of Poznan University of Technology, Poznań, Poland
  • 48. Sumelka W., Glema A., 2007, The evolution of microvoids in elastic solids, In: 17th International Conference on Computer Methods in Mechanics CMM- 2007, Łódź-Spała, Poland, June 19-22, 347-348
  • 49. Sumelka W., Glema A., 2009, Theoretical and computational aspects of implementation of anisotropic constitute model for metals with microstructural defects, In: 18th Int. Conf. on Computer Methods in Mechanics CMM-2009, Zielona Góra, Poland, May 18-21, 451-452
  • 50. Truesdell C., Noll W., 1965, The Non-Linear Field Theories of Mechanics, In: Handbuch der Physik III/3, Springer-Verlag, S. Fl¨ugge (Edit.)
  • 51. Voyiadjis G.Z., Abu Al-Rub R.K., 2006, A finite strain plastic-damage model for high velocity impacts using combined viscosity and gradient localization limiters: Part II – Numerical aspects and simulations, International Journal of Damage Mechanics, 15, 4, 335-373
  • 52. Xiao H., Bruhns O.T., Meyers A., 1997, Logarithmic strain, logarithmic spin and logarithmic rare, Acta Mechanica, 124, 89-105
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM7-0002-0051
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.