PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Syntax errors in flat EPC diagrams made by persons learning the methodology

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Błędy składniowe popełniane w płaskich diagramach EPC przez osoby poznające tę metodologię
Języki publikacji
EN
Abstrakty
EN
While conducting previous studies, it was noticed, that in the EPC diagrams used to build process models under preparation of the integrated management system documentation, there were many syntax errors. This article is a discussion on the results of the follow-up studies to the aforementioned issue. The main point of the studies was to identify the syntax errors made in flat EPC diagrams by the persons learning the methodology of process modelling. The errors identified have been discussed in details. Under all cases, the relevant principles have been referred to breaking of which had led to the given error. The author has also proposed the appropriate solutions that may be applied instead of the incorrect diagram sections. The results presented and discussed can be used to improve the leaning process in the sphere of the EPC methodology application.
PL
Podczas przeprowadzonych wcześniej badań zaobserwowano, że w diagramach EPC, wykorzystywanych do tworzenia modelu procesów w ramach dokumentacji zintegrowanych systemów zarządzania, występuje wiele błędów składniowych. W artykule przedstawione zostały wyniki badań stanowiących kontynuację tego tematu. Skupiono się w nich na identyfikacji błędów składniowych popełnianych w płaskich diagramach EPC przez osoby poznające tę metodologię modelowania procesów. Zidentyfikowane błędy zostały szczegółowo omówione. W każdym przypadku przytoczono odpowiednie reguły, których złamanie było przyczyną zaistnienia danego błędu. Przedstawiono także propozycję rozwiązań prawidłowych, które mogą być zastosowane zamiast nieprawidłowych fragmentów diagramów. Zaprezentowane wyniki mogą zostać wykorzystane do doskonalenia procesu kształcenia w zakresie stosowania metodologii EPC.
Rocznik
Strony
75--79
Opis fizyczny
Bibliogr. 12 poz., rys., tab.
Twórcy
  • Silesian University of Technology, Faculty of Organisation and Management Institute of Production Engineering Politechnika Śląska, Wydział Organizacji i Zarządzania, Instytut Inżynierii Produkcji 41-800 Zabrze, ul. Roosevelta 26, bartosz.szczesniak@polsl.pl
Bibliografia
  • 1. KELLER G., NÜTTGENS M, SCHEER A.W.: Semantische Prozeβmodellierung auf der Grundlage „Ereignisgesteuerter Prozeβketten (EPK)”. at: Scheer, A.-W. (Hrsg.): Veröffentlichungen des Instituts für Wirtschaftsinformatik, Heft 89, Saarbrücken 1992.
  • 2. VAN DER AALST W.M.P.: Formalization and verification of event-driven process chains, Information and Software Technology 41, 1999, 639–650.
  • 3. NÜTTGENS M., RUMP F.J.: Syntax und Semantik Ereignisgesteuerter Prozessketten (EPK), at: Desel J.; Weske M. (Hrsg.): Promise 2002 – Prozessorientierte Methoden und Werkzeuge für die Entwicklung von Informationssystemen, Proceedings des GI-Workshops und Fachgruppentreffens (Potsdam, Oktober 2002), LNI Vol. P-21, Bonn 2002, 64–77.
  • 4. MENDLING J., VAN DER AALST W.M.P.: Towards EPC Semantics based on State and Context. at: M. Nüttgens, F.J. Rump, J. Mendling, eds.: Proc. of the 5th GI Workshop on Event-Driven Process Chains (EPK 2006), Vienna, Austria, Dec. 2006, 25–48.
  • 5. CUNTZ N., KINDLER E.: On the semantics of EPCs: Efficient calculation and simulation, w: Nüttgens M.; Rump F.J. (Hrsg.): EPK 2004 – Geschäftsprozessmanagement mit Ereignisgesteuerten Prozessketten, Proceedings des GI-Workshops und Arbeitskreistreffens (Luxemburg, October 2004), 7–26.
  • 6. KINDLER E.: On the semantics of EPCs: A framework for resolving the vicious circle. Technical Report, Reihe Informatik, University of Paderborn, Paderborn, Germany, 2003.
  • 7. MENDLING J., NÜTTGENS M.: EPC Modelling based on Implicit Arc Types. at: Godlevsky, M.; Liddle S.W., Mayr H.C. (Eds.): Information Systems Technology and its Applications, International Conference ISTA’2003, June 19–21, 2003, Kharkiv, Ukraine, Proceedings. LNI 30 GI 2003, 131–142.
  • 8. GABRYELCZYK R., ARIS w dokumentowaniu procesów biznesu, Diffin, Warszawa 2006.
  • 9. GABRYELCZYK R., LASEK M., Modelowanie procesów gospodarczych za pomocą ARIS-TOOLSET, Nowy Dziennik Sp.z o.o. and the University of Warsaw, Warszawa 1998.
  • 10. SZCZĘŚNIAK B., GĘBCZYŃSKA A., Modele EPC w dokumentacji systemu zarządzania jakością. Ekonomika i Organizacja Przedsiębiorstwa, 4/2010.
  • 11. Strona internetowa: Universität Hamburg – EPK Community: http://www.wiso.uni-hamburg.de (16.01.2010).
  • 12. SZCZĘŚNIAK B.: Syntax errors in the EPC diagrams of the integrated management system documents. Scientific Journals, Maritime University of Szczecin, 24/2010.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM6-0007-0032
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.