The effects of matrix module structure on shipyard panel line’s throughput

• Autorzy: Ozkok Murat
• Języki publikacji: EN

Abstrakty

EN

Over the last decades a really tough competitive environment has been observed in shipbuilding sector. Under these circumstances shipyards desire to reduce product cycle time in order to manufacture the product as soon as possible. For this reason it is required to make some alterations in shipyard production system in order to reduce cycle time. In this study a panel fabrication line used in a shipyard, has been considered. The workstations of the panel line have been modeled by using ARENA simulation software and the effects of matrix module assembly on panel line throughput, have been determined.

Słowa kluczowe

EN

shipyard; ship production; panel line; matrix module assembly; simulation

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2012
• Tom: nr 3
• Strony: 65--71
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Ozkok Murat

• Department of Naval Architecture and Marine Engineering, Karadeniz Technical University, 61530 Camburnu/Trabzon, TURKEY, phone: [phone], fax: [phone],

Bibliografia

• 1. Rashwan, A.M., and Naguib, A.:Toward improving the cost competitive position for shipbuilding yards, Part I: Impact of technology changes. Alexandria Engineering Journal, Vol.45 (2006), No.5, pp.537-543.
• 2. Lamb, T.: Simulation-based performance improvement for shipbuilding processes. Journal of Ship Production, Vol. 22 (2006), No. 2, pp.49-65.
• 3. Okumoto, Y., Hiyoku, K., and Uesug, N.: Simulation-based ship production using three-dimensional CAD. Journal of Ship Production, Vol.22 (2006), No.3, pp.155-159.
• 4. Shin, J.G. : a modeling and simulation of production process in subassembly lines at a shipyard. Journal of Ship Production, vol.20 (2004), No.2, pp. 79-83.
• 5. Shin, J.G.: a concept and framework for a shipyard layout design based on simulation. Journal of Ship Production, Vol.25 (2009), No.3, pp.126-135.
• 6. Alfeld, L.E., Pilliod, C.S., and Wilkins, J.R.: The virtual shipyard: a simulation model of the shipbuilding process. Journal of Ship Production, Vol.14 (1998), No.1, pp.33-40.
• 7. Alkaner, S. : The modeling and analysis of ship production with simulation: Case Study. PhD Thesis, ITU Institute of Science, Istanbul, 1998.
• 8. Greenwood A.G., Hill, H.W.: Simulation optimization decision support system for ship panel shop operations. Proceedings of the 2005 Winter Simulation Conference, pp. 2078-2086.
• 9. Lee,D. et al. : Development and application of an intelligent welding robot system for shipbuilding. Robotics & Computer-Integrated Manufacturing, vol. 27 (2011)., No. 2, pp. 377-388.
• 10. Cha, J.H., and Roh, M.I.: Combined discrete event and discrete time simulation framework and its application to the block erection process in shipbuilding. Advances in Engineering Software, vol. 41(2010), No. 4, pp. 656-665.