Assembling of bearing sleeve on ship propulsion shaft by using EPY resin compound

• Autorzy: Grudziński Karol , Grudziński Paweł , Jaroszewicz Wiesław , Ratajczak Jędrzej
• Języki publikacji: EN

Abstrakty

EN

This paper presents an original novel solution of the problem of assembling a large bearing sleeve (of about 1000 mm in diameter) on ship propulsion shaft by using EPY resin compound. The problem is discussed on the concrete example dealing with a ship under repair. Design project of assembling the sleeve on the shaft by using the resin compound, model research on its casting process as well as assembling technology of the sleeve on the shaft, are presented and a practical way of realization of the project in conditions of a Chinese ship repair yard, is also highlighted. During more than three-year-long operation the solution has standed the test of time without any complaint.

Słowa kluczowe

EN

bearing sleeve; propulsion shaft; assembling; EPY resin compound

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2012
• Tom: nr 2
• Strony: 49--55
• Opis fizyczny: Bibliogr. 2 poz., rys.

Twórcy

autor

Grudziński Karol

autor

Grudziński Paweł

autor

Jaroszewicz Wiesław

autor

Ratajczak Jędrzej

• West Pomeranian University of Technology, Szczecin Faculty of Mechanical Engineering and Mechatronics Al. Piastów 19 70-310 Szczecin, POLAND,

Bibliografia

• 1. Grudziński K., Jaroszewicz W.: Seating of machines and devices on foundation chocks cast of EPY resin compound. Published by ZAPOL – Dmochowski & Sobczyk Registered Partnership, Szczecin, 2002 (in Polish), 2004 (in English), 2006 (in Russian).
• 2. Piaseczny L.: Polymer technology in ship repair (in Polish ). Gdańskie Towarzystwo Naukowe (Gdańsk Scientific Society), Gdańsk, 2002.