Problems of the starting and operating of hydraulic components and systems in low ambient temperature Part III. Methods of determining parameters for correct start-ups of hydraulic components and systems in low ambient temperatures

• Autorzy: Jasiński R.
• Języki publikacji: EN

Abstrakty

EN

More and more intensive technology development makes it possible to produce modern hydraulically driven devices which secure high reliability of operation in various conditions. To design such devices, investigations are performed, including experimental tests, which are very expensive and time consuming. In the design process of a new hydraulically driven machine or system, designers frequently have to solve problems concerning its operation in different weather conditions, for instance in low ambient temperatures. Due to the complexity of the phenomena of concern, the serviceability of the designed hydraulic component or system in those conditions is most frequently assessed based on numerical calculations, much cheaper than the experiments. The article presents three methods: experimental, analytical, and that based on computer simulation, applied for assessing the serviceability of cold hydraulic components supplied with hot working medium being a source of a so-called thermal shock.

Słowa kluczowe

EN

hydraulic machines; hydraulic drives; diagnostics; hydraulic systems

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2009
• Tom: nr 4
• Strony: 22--31
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Jasiński R.

• Faculty of Mechanical Engineering Gdansk University of Technology Narutowicza 11/12 80-952 Gdansk, POLAND,

Bibliografia

• 1. Balawender A.: Energy analysis and methodology of examination of low-speed hydraulic motors (in Polish). Zeszyty Naukowe PG. Gdańsk 1988
• 2. Balawender A., Bieńkowski A.: Examining motors SOK 160 in thermal shock conditions. Report on stage IV of Agreement 780106 commissioned by ZUO Hydroster in Gdansk (in Polish); Gdansk 1981
• 3. Jasiński R.: Operation of low-speed hydraulic motors in thermal shock conditions (in Polish). PhD thesis, supervisor: A. Balawender. Gdańsk 2002
• 4. Jasiński R.: Problems of the starting and operating of hydraulic units and systems in low ambient temperature (Part 1), Polish Maritime Research 4/2008
• 5. Jasiński R.: Problems of the starting and operating of hydraulic units and systems in low ambient temperature (Part 2), Determining the clearance between cooperating elements during the hydraulic components start-up in extremely low ambient temperatures on the ground of experimental research, Polish Maritime Research 1/2009
• 6. Kleiber M.: Introduction to the finite element method (in Polish); Państwowe Wydawnictwo Naukowe, Warszawa-Poznań 1989
• 7. Kondrat’ev G.M.: Regularnej teplovej rezim. Moskwa: Gosud. Izdat. Tech. Teoret. Literat. 1954
• 8. Kondrat’ev G.M.: Teplovyje izmerenija. Moskwa: Gosud. Nauczno-Tech. Izdat. Maszinost. 1957
• 9. Kruszewski J., collective work: Finite element method in dynamics of structures (in Polish); Arkady, Warsaw 1984
• 10. Rusiński E.: Finite Element Method. System COSMOS/M (in Polish). Wydawnictwa Komunikacji i Łączności, Warszawa 1994
• 11. Rusiński E., Czmochowski J., Smoliński T.: Advanced finite element method in supporting structures (in Polish)
• 12. Szargut J.: Numerical modelling of temperature fields (in Polish). Wydawnictwo Naukowo-Techniczne, Warszawa 1992
• 13. Wiśniewski S., Wiśniewski T.: Heat transfer (in Polish). Wydawnictwo Naukowo-Techniczne, Warszawa 2000.