Flow through an eccentric longitudinal clearance ring

• Autorzy: Papierski A. , Peczkis G.
• Języki publikacji: PL

Abstrakty

EN

In this work there are presented flow calculation models through the longitudinal eccentric throttle clearance ring. There are shown some calculations for laminar and turbulent flow. Turbulent flow is described as self-similar and with application of model k -epsilon, the description is illustrated with calculative example. The measurement results of pressure fields measured in the longitudinal eccentric clearance are presented. The calculation results obtained with different methods are compared with one another.

Słowa kluczowe

EN

centrifugal pump; eccentric clearances

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2008
• Tom: nr 121
• Strony: 67--84
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Papierski A.

autor

Peczkis G.

• Lodz University of Technology, Institute of Turbomachinery, Wólczańska 219/223, 90-924 Łódź, Poland,

Bibliografia

• [1] CFX-TASCflow Theory Documentation. Version 2.12. AEA Technology Engineering Software Limited Waterloo, Ontario, Canada N2L 5Z4.
• [2] Chodkiewicz R., Papierski A.: CFD Code a Useful Tool for the Turbomachinery Designer, Seminar/Summer School CFD for Turbomachinery Aplications, 2001.
• [3] Gryboś R.: Fundamentals of Fluid Mechanics, PWN, Warszawa 1989 (in Polish).
• [4] Jędral W.: Methods of Calculations of Longitudinal Forces and Relaxing Systems in Rotary Pumps, Warsaw University of Technology Publishers, Warszawa 1988 (in Polish).
• [5] Jędral W.: Flows through Annular Clearences, Mechanical Survey (Przegląd Mechaniczny), z. 11, 1979 (in Polish).
• [6] Kazimierski Z.: Numerical Determination of Turbulent Flows, Ossolineum, Wroclaw 1992 (in Polish).
• [7] Korczak A. Papierski A.: The flow through the face clearance of the disk relieving the axial force in multi-stage centrifugal pump, Trans, of the IFFM, No. 115, 2004, 25-140.
• [8] Papierski A., Rabiega M.: Multiblock Paraller Computation of an Incompressible 3-D Flow in Turbomachines, Task Quarterly 3, No. 1, 1999, 39-52.
• [9] Rodi W.: Experience with two-layer models combining the k — ε model with a one-equation model near the wall, American Institute of Aeronautics and Astronautics Paper 91-0216, American Institute of Aeronautics and Astronautics 29th Aerospace Sciences Meeting, Reno, Nevada, USA, January 7-10 1991.
• [10] Tied W.: Berechnung des laminaren uda turbulenten Reibungswiedestandes koncentrischer und exzentrischer Ringspalte, Cemiker-Ztg./Chem Apparatur, 90 Jahrgang, nr 23. 1966.
• [11] Troskolański A.T.: Hydromechanics, WNT, Warszawa 1962 (in Polish).
• [12] Zarzycki M., G.Peczkis: Optimisation of Inter-Overhaul Operation Period of Multistage Centrifugals Pumps, TEMAG 2002, Ustroń (in Polish),
• [13] Lomakin A.A.: Razćet kriticeskogo cisla oborotov i uslovanija obezpećenija dinami/'eskoj ustojcivosti rotorov wysokonapornych gidravliceskich masin s ućetom cil, voznikajuscich b uplotenijach, Energo-masinostrojenije, No. 4, Moskva 1958.
• [14] Marcinkovskij V.A., Karincev I.B.: Vlijanije scelevychuplotenij na kritićeske skorosti rotora pitatelnych nasosov, Energomaśinostrojenije, No. 4, Mockva 1961, 12-14.
• [15] Marcinkovskij V.A.: Vlijanije rotorov centrobeznych masin, Kniga 1, Sumy 2002.
• [16] Cegurko L.E.: Razgruzoćnye ustrojstva pitatelnych nasosov teplovych elek- trostancij, Energija, Moskva 1978.
• [17] Gryboś R.: Dynamics of Rotating Machinery, PWN, Warszawa 1994 (in Polish).
• [18] Marcinkovskij V.A.: Beskontaktnye uplotnienia rotornych masin, Mockva 1980, (publikacja wykonana w ramach Grantu KBN 8 T07B 006 21).
• [19] Peczkis G.: Analytical and Empirical Investigations of Pressure Distribution in Eccentric Longitudinal Clearence, PhD Thesis, Gliwice 2007 (in Polish).