PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Possibilities for the Application of Numerical Modelling to the Optimization of Combustion Processes and Gas Dynamics in Heating Furnaces

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The progressing development of industry and the associated increasing environmental pollution create the need for the intensification of combustion processes and the implementation of increasingly stringent environmental protection standards. Therefore, an intensive progress in scientific and research work is observed, and studies with the use of numerical methods are becoming an indispensable element of experimental research, enabling the optimization of combustion processes with the simultaneous evaluation of ecologic effects and, as a result, the development of new designs of burners and special, low-emission combustion technologies. This article presents possibilities for the numerical modelling of combustion processes and gas dynamics in heating furnaces. The chemistry of the combustion process was modelled using the software CHEMKIN version 4.02, while the gas dynamics of flue gas flow in the combustion chamber was modelled with the program FLUENT. Numerical computations were performed for both the experimental chamber and real facilities, namely a pusher furnace and a sheet hardening furnace.
Słowa kluczowe
Rocznik
Strony
95--103
Opis fizyczny
Bibliogr. 13 poz., rys., tab.
Twórcy
autor
autor
autor
autor
  • Czestochowa University of Technology, Faculty of Process & Materials Engineering and Applied Physics Department of Industrial Furnaces and Environmental Protection, nowak@mim.pcz.czest.pl
Bibliografia
  • [1] Miller J. D., Bowman C.T.: Mechanism and Modeling of Nitrogen Chemistry in Combustion. Progress in Energy and Combustion Science, 15, 1989, pp. 287-338
  • [2] Bilbao R., Alzueta M. U., Millera A., Cantín V.: Experimetal study and modelling of the burnout zone in the natural gas reburning process. Chemical Engineering Science, Vol. 50, No. 16, 1995, pp. 2579-2587
  • [3] Baltasar J., Carvalho M. G., Coelho P., Costa M.: Flue gas recirculation in gas – fired laboratory furnace: measurements and modeling. Fuel, Vol. 76, No. 10, 1997, pp. 919-929
  • [4] Donghee Han, Mungal M. G., Zamansky V. M., Tyson T. J.: Prediction of NOx Control by Basic and Advanced Gas Reburning Using the Two – Stage Langrangian Model. Combustion and Flame, Vol. 119, 1999, pp. 483 – 493
  • [5] Marinov N. M., Pitz W. J., Westbrook C. K., Castaldi M. J., Senkan S. M.: Modeling of Aromatic Hydrocarbon Formation in Premixed Methane and Ethane Flames. Department of Energy by the Lawrence Livermore National Laboratory under contract , No. W-7405-ENG-48
  • [6] Eaton A. M., Smoot L. D., Hill S. C., Eatough C. N.: Components, formulations, solutions, evaluation, and application of comprehensive combustion models. Progress in Energy and Combustion Science, Vol. 25, 1999, pp. 387 – 436
  • [7] Istvángy Zsély, Tamás Turányi: Investigation and reduction of two methane combustion mechanisms. Archivum Combustionis, Vol. 21, No. 3, 2001
  • [8] Li S. C., Williams F. A.: NOx formation in Two-Stage Methane-Air Flames. Combustion and Flame, Vol. 118, 1999, pp. 399-414
  • [9] Glarborg P., Alzueta M. U., Dam-Johansen K., Miller J.: Kinetic modeling of hydrocarbon / nitric oxide interactions in a flow reactor. Combustion and Flame, Vol. 115, 1998, pp. 1-27
  • [10] Bilbao R., Alzueta M. U., Millera A., Cantín V.: Experimental study and modeling of the burnout zone in the natural gas reburning process. Chemical Engineering Science, Vol. 50, No. 16, 1995, pp. 2579-2587
  • [11] B.Soroka , I.Karp, K.Pyanykh, M.Khinkis, H.Abbasi, J.Rabovitser.: Numerical modeling of low-emission natural gas combustion/ Proceedings of the "TURBO- 98" conference, vol.1. - COMOTI: Bucuresti (Romania) -p.177 - 200.
  • [12] Gradoń B., Tomeczek J.: Prediction of N2O and NH inn fuel – rich gaseous flames. Combustion and Flame, Vol. 126, 2001, pp. 1856-1859
  • [13] Gradoń B.: Rola podtlenku azotu w modelowaniu emisji NO z procesów spalania paliw gazowych w piecach wysokotemperaturowych. Zeszyty Naukowe Politechniki Śląskiej, Gliwice 2003
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM4-0011-0052
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.