Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The application of Reaction Injection Molding (RIM) technique for forming an elastic polyurethane coating that displays selected strength characteristics, and chemical and thermal resistance is described. The study was conducted on technical-scale using a mixing-dosing device that allowed direct dosing of liquid polyurethane system into the steel bulkhead, onto the steel surfaces, and the formation of polyurethane coating. Hard coating formed after polymer gelation and crosslinking. The elaborated technology also allowed joining of ceramsite concrete which resulted in the sandwich costruction consisting of steel, concrete and polyurethane.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
31--34
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
Bibliografia
- 1. Wirpsza Z.: Polyurethanes chemistry technology of applying (in Polish). WNT, Warszawa 1991
- 2. Datta J., Kania E., Krajewski G., Haponiuk J.T.: Analysis of strength of polyurethane-steel layers, XLIX Zjazd PTChem I SITPChem, Gdańsk, 18-22 September 2006
- 3. Datta J., Łaski M., Kucińska-Lipka J.: The properties of polyurethane elastomers to be used as polymer cores in sandwich plate systems (SPS). Przem. Chem. 2007, 86, 63.
- 4. Datta J., Łaski M., Witkiewicz W.: The polymer–steel sandwich plate systems (SPS). Przem. Chem. 2007, 86, 200
- 5. Datta J, Bielińska M.: Effect of ceramsite on properties of cast urethane elastomers. Przem. Chem. 2007, 86, 663
- 6. Haponiuk J., Strankowski M., Datta J.: The latest developments in chemistry and technology of thermoplastic polyurethane elastomers, „Pomerania – Plast” Scientific Conference, 23-25 May 2007, Szczecin-Kołobrzeg. Seminar material.
- 7. http://plastics.turkavkaz.ru/processes/molding/injectionmolding/ reaction/
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM3-0019-0027