Pith control servomechanism for low power rate CP propeller

• Autorzy: Dymarski C.

Warianty tytułu

PL

Mechanizm zmiany skoku śruby nastawnej małej mocy

• Języki publikacji: EN

Abstrakty

EN

The presented paper deals delivers analysis and design of a pitch control servomechanism for a low power rate controllable pitch propeller. The technical specification and method of preliminary design of this mechnaism is discussed. In addition to simplicity of the mechanism, it introduces an innovative solution for a small fishing vessel. The servomechanism and CP propeller were designed in the Faculty of Ocean Engineering and Ship Technology, Technical University of Gdańsk. The prototype of the CP propeller, as well as its remote control system will be tested on the laboratory stands before installation on the board.

PL

W pracy przedstawiono analizę mechnizmów zmiany skoku śrub nastawnych oraz założenia techniczne i rozwiązania konstrukcyjne takiego prostego, ale nowoczesnego mechanizmu dla śruby małej mocy. Mechanizm ten wraz ze śrubą nastawną i układem sterowania zaprojektowane zostały na Wydziale Oceanotechniki i Okrętownictwa Politechniki Gdańskiej. Po wykonaniu niezbędnych badań laboratoryjnych wymieniony system śruby nastawnej zainstalowany zostanie na małej jednostce rybackiej.

• Wydawca: Polish Academy of Sciences - Branch in Gdańsk Marine Technology Committee of the Polish Academy of Sciences
• Czasopismo: Marine Technology Transactions. Technika Morska
• Rocznik: 2001
• Tom: Vol. 12
• Strony: 31--42
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Dymarski C.

• Technical University of Gdańsk, Faculty of Ocean Engineering and Ship Technology 80-952 Gdańsk, ul. Narutowicza 11/12

Bibliografia

• [1] Bergier T., Gerlach T., Stankiewicz M., Szantyr J., Ship Machinery and Auxiliary Equipment, Part l: Marine Controllable Pitch Propellers, Publisher WSMW, Gdynia 1985 (in Polish).
• [2] Buship, Catalogues and information materials.
• [3] Dymarski C., Examination of Sliding Radial Seals of Big Diameter Shafts at High Pressure of Delivered Oil, Scientific Report, Technical University of Gdansk, No. 365, "Budownictwo Okrgtowe XXXIX", 1984.
• [4] Dymarski C., Investigation on Transversal Stiffness of Bearing Bush and its influence on radial Sliding Seals, Marine Technology Transactions, Technika Morska, Vol. 7, 1966 (in Polish).
• [5] Dymarski C., Empirical Research on the Sliding Radial Seals Applicable to CP Propellers, Polish Maritime Research, No. 4, December 1996, Vol. 3.
• [6] Dymarski C., Marine Controllable Pitch Propellerfor Low Power Rate, Equipped with Screw Gear in the Pitch Control Mechanism, Marine Technology Transae tions, Technika Morska, Vol. 8, 1967 (in Polish).
• [7] Dymarski C., Laboratory Based Investigation of Hydraulic Servomechanism Low Power Rate Marine CP Propeller, Marine Technology Transactions, Tech. nika Morska, Vol. 8, 1967 (in Polish).
• [8] Dymarski C., Laboratory investigations of the stern tube bearings and pitch con.. trol mechanism of the low — power CP propeller with screw-toothed gear, Polish Maritime Research, No. 3, Vol. 5, 1968.
• [9] Dymarski C., Theoretical Research on Sliding Radial Seals Applicable to CP Pro. pellers, Polish Maritime Research, No. l, Vol. 5, March 1968.
• [10] Dymarski C., Stability of Performance Analysis of Radial Sliding Seals, Marine Technology Transactions, Technika Morska, Vol. 10, 1969 (in Polish).
• [11] Escher Wyss, 40 Years Escher Wyss Controllable Pitch Propellers. The Modern Reliable Robust Design.
• [12] Kamewa, Controllable Pitch Propeller — Type S2 and other information materials: ms and catalogues delivered by the company.
• [13] Lips, Information Materials and Catalogues.
• [14] Stone Vickers, Controllable Pitch Propeller — Model XL, Stone Vickers Limited, Anchore Hopelane, London.
• [15] Wind J., The Development of Controllable Pitch Propeller System, Lips Technical Presentation Day, September 1971, Drunen — Holland.