A method for determining the decision variables of hazardous zone identification system for ship power plant operator

• Autorzy: Kamiński P. , Podsiadło A. , Tarełko W.
• Języki publikacji: EN

Abstrakty

EN

In this paper a method is presented of determining - on the basis of information available in the preliminary phase of ship power plant design - the set of hazardous and noxious factors for the operator, as well as of converting them into the set of input variables to a hazardous zone identification system. Basing on the choice of values of determined decision variables, the system's user is able to determine potential hazardous zones for the ship power plant operator. Conversions of the determined factors into the set of the system's input variables were performed by using the knowledge achieved from the side of experts in ship power plant designing and operating.

Słowa kluczowe

EN

ship power plant; safety; operator; hazardous zone; task realization procedures; decision variables; hazardous factors; noxious factors

PL

siłownie okrętowe; bezpieczeństwo; operator; strefa niebezpieczna; procedury realizacji zadań; zmienność decyzji; strefa wiatrów zmiennych; czynniki niebezpieczne; czynniki szkodliwe

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2006
• Tom: nr 3
• Strony: 17--25
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Kamiński P.

autor

Podsiadło A.

autor

Tarełko W.

• Faculty of Maritime Engineering Gdynia Maritime University ul. Morska 81 -87, 81-225 Gdynia, Poland,

Bibliografia

• 1. Tarełko W. et al : Anthropo-technical assumptions for designing safe technical objects – subject-matter report (in Polish). Report on realization of the research project no. 8T07C 01120 financially supported by KBN (Scientific Research Committee). Issue no 1. Chair of Basic Engineering, Gdynia Maritime University. Gdynia, 2004
• 2. Podsiadło A., Tarełko W. Identification of hazard zones in ship power plants. Proceedings of European Safety & Reliability Conference (ESREL 2005). Advances in Safety and Reliability. A.A. Balkema Publishers. 27-30 June 2005. Gdańsk
• 3. Podsiadło A., Tarełko W. Modelling a decision-making process of hazard zone identification in ship power plants. Proceedings of European Safety & Reliability Conference (ESREL 2005). Advances in Safety and Reliability. A.A. Balkema Publishers. June 2005. Gdańsk
• 4. Tarełko W. Machinery function factors triggering off hazards for operators of ship power plants. Proceedings of the 11th International Congress of the International Maritime Association of the Mediterranean (IMAM 2005). Lisboa, Portugal. September 2005
• 5. Podsiadło A. A model of the process of task realization by ship power plant operators (in Polish). Proceedings of IV International Scientifically-Technical Conference: EXPLODIESEL & GAS TURBINE 05’. Gdańsk-Międzyzdroje- -Copenhagen. May 2005
• 6. Podsiadło A. Operational factors triggering off hazards for operators of ship power plants. Proceedings of the 11th International Congress of the International Maritime Association of the Mediterranean (IMAM 2005). Lisboa, Portugal. September 2005
• 7. International Maritime Organization: Noise levels on board ships., London, 1982
• 8. Ministry of Shipping : Collection of regulations concerning technical requirements for the professional health and safety (BHP) related to control and equipment (in Polish). Labour Institute (Instytut Pracy). Gdańsk, 1985
• 9. Girtler J.: Machines’ operating process of ship power plants. Proceedings XIX-th International Symposium on Ship Propulsion Plants. Szczecin Maritime Academy, Szczecin, 1997