Komory kalibracyjne - przegląd rozwiązań konstrukcyjnych

• Autorzy: Bałachowski L.

Warianty tytułu

EN

Calibration chambers - review of technical solutions

• Języki publikacji: PL

Abstrakty

PL

Przegląd, charakterystyka i rozwiązania konstrukcyjne komór kalibracyjnych o podwójnym i pojedynczym płaszczu bocznym. Ogólne zasady badań w gruntach niespoistych. Zakres badań w komorze kalibracyjnej Laboratorium Geotechniki Politechniki Gdańskiej.

EN

Review, description and technical solutions of calibration chambers with single and double lateral coating. General principles of the investigations on non-cohesive soils. Scope of investigations in calibration chamber in Geotechnical Laboratory at Gdańsk University of Technology.

Słowa kluczowe

PL

komory kalibracyjne; badania modelowe

EN

calibration chambers; model investigations

• Wydawca: IMOGEOR, Spółka z o. o.
• Czasopismo: Inżynieria Morska i Geotechnika
• Rocznik: 2006
• Tom: nr 6
• Strony: 345--350
• Opis fizyczny: Bibliogr. 31 poz., rys., tab.

Twórcy

autor

Bałachowski L.

• Politechnika Gdańska, Wydział Inżynierii Lądowej i Środowiska, Katedra Geotechniki i Geologii Stosowanej

Bibliografia

• 1. Ajalloeian R. and Yu, H.S.: Chamber studies of the effects of pressuremeter geometry on test results in sand. Geotechnique 48, No. 5/1998.
• 2. Baldi G., Bellotti R., Ghionna V., Jamiolkowski M., Marchetti S. and Pasqualini E.: Flat dilatometer tests in calibration chambers. ASCE Symposium on Use of In-Situ Tests in Geotechnical Engineering, Blacksburg, 23-25 June, Geotechnical Special Publication No. 6/1986.
• 3. Bałachowski L, Dembicki E.: Une etude de pieux fonces dans la chambre d'etalonnage, Journees Nationales pour la Geotechnique et la Geologie d'lngenieurs, Nancy, 8-9 Octobre 2002.
• 4. Bałachowski L., Dembicki E.: La construction d'une chambre d'etalonnage a l'Universite Technique de Gdańsk. Studia Geotechnica et Mechanica, Vol. 25, No 1-2/2003.
• 5. Bałachowski L., Kozak P., Dembicki E.: Effect of preconsolidation on pile bearing capacity in model tests. Studia Geotechnica et Mechanica, Vol. 27, No 1-2, 2005.
• 6. Bałachowski L.: Analysis of dilatometer test in calibration chamber. Proceedings of the 2nd International Conference on the Flat Dilatometer. 2-5 April, Washington 2006.
• 7. Been K., Crooks J.H.A., Becker D.E., Jefferies M.G.: The cone penetration test in sands: part I, state parameter interpretation. Geotechnique 36, No. 2/1986.
• 8. Bellotti R., Bizzi G., Ghionna Y.: Design, construction and use of a calibration chamber, Proceedings of the 2nd European Symposium on Penetration Testing, Amsterdam, 24-27 May 1982.
• 9. Bellotti R., Crippa V., Pedroni S., Ghionna V.N.: Saturation of sand specimen for calibration chamber tests. Proceedings of International Symposium on Penetration Testing. ISOPT-1, 1988.
• 10. Bellotti R., Pedroni S.: Design and development of a small calibration chamber for compressible sands. Proceedings of the lst International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA. 1991.
• 11. Brandon T.L., Clough G.W.: Methods of sample fabrication in the Virginia Tech calibration chamber. Proceedings of the 1st International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA 1991.
• 12. Chapman G.A.: A calibration chamber for field test equipment. Proc. lst Eur. Symp. Penetration Testing, Stockholm 1974.
• 13. Foray P.: Scale and boundary effects on calibration tests. Proceedings of the 1st International Conference on Calibration Chamber Testing. CIarkson Univ. Potsdam, USA, 1991.
• 14. Fretti C., Lo Presti D.C.F., Pedroni S.: A pluvial deposition method to reconstitute well-graded sand specimens. Geotechnical Testing Journal, Vol. 18, No.2/1995.
• 15. Ghionna V.N., Jamiołkowski M.: A critical apparaisal of calibration chamber testing in sands. Proceedings of the lst International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA, 1991.
• 16. Holden J.C.: Laboratory research on static cone penetrometers. University of Florida, Gainsville, Department of Civil Engineering, Internal report CE-SM-71-1,1971.
• 17. Houlsby G.T; Hitchman R.: Calibration chamber tests of cone penetrometer in sand. Geotechnique, 38(1): 1988.
• 18. Hsu H.- H. and Huang A.- B.: Development of an Axisymmetric Field Simulator for Cone Penetration Tests in Sand. Geotechnical Testing Journal, GTJODJ, Vol. 21, No.4/1998.
• 19. Huang, A.-B., Holtz, R.D., Chameau, J.-L A: Calibration Chamber for Cohesive Soils. Geotechnical Testing Journal, Vol. 11, No. 1/1988.
• 20. Huang A.-B., Hsu H.-H.: Cone penetration tests under simulated field conditions. Geotechnique 55, No. 5/2005.
• 21. Iwasaki K. Tanizawa F., Zhou S. and Tatsuoka F.: Cone resistance and liquefaction strength of sand. Proceedings of the 1st International Symposium on Penetration Testing, lS0PT-l, Orlando, 20-24 March, Vol. 2/1988.
• 22. Kurup P.U., Voyiadis G.Z., and Tumay M.T.: Calibration chamber studies of piezocone test in cohesive soils. Journal of Geotechnical Engineering, Vol. 120, No. 1/1996.
• 23. Lunne T., Robertson P. K., Powel J.J.M.: Cone Penetration Testing in Geotechnical Practice. Blackie Academic and Professional 1997.
• 24. Mayne P.W., Kulhawy F.H.: Calibration chamber database and boundary effects correction for CPT data. Proceedings of the lst International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA, 1991.
• 25. O'Neill M.W.: Houston calibration chamber: case histories. Proceedings of the 1st International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA 1991.
• 26. Parkin A.K., Lunne T.: Boundary effects in the laboratory calibration of a cone penetrometer for sand. Proceedings of the 2nd European Symposium on Penetration Testing, Amsterdam, 24-27 May 1982.
• 27. Peterson R.W., Arulmoli K.: Overview of a large stress chamber system. Proceedings of the 1st International Conference on Calibration Chamber Testing, Clarkson Univ. Potsdam, USA, 1991.
• 28. Robertson P.K., Campanella R.G.: Interpretation of cone penetrometer test Part I: Sand, Canadian Geotechnical Journal, 20(4) 1983.
• 29. Salgado R., Mitchell J.K. Jamiołkowski M.: Calibration chamber size effects on penetration resistance in sand. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124 (9), 1998.
• 30. Veismanis A: Laboratory investigation of electrical friction cone penetrometers in sands, Proceedings of European Symposium on Penetration Testing, Stockholm, June 1974.
• 31. Yu H.S., Schnaid F., and Collins.I. F.: Analysis of cone pressuremeter tests in sands. Journal of Geotechnical Engineering, ASCE, 122 (8): 1996.