PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A concept of thermo-flow state diagnostic system for steam turbines

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Under normal operating conditions thermo-flow properties of steam turbines vary. This process of deteriorating indicators - except failures - is continuous. That is why a study of the possibility of building continuous diagnosis system has been undertaken. Changes mentioned above are very slow, so it seems advisable to build a steam turbine simulator program. It enables precise study of the influence of particular and complex factors on turbine characteristics changes. Assumptions and general simulator programs structures are presented. With the aid of this tool we investigated the impact of typical damages which may occur in a turbine: gland degeneration and blade salinity. Concept diagnosis based on the change of characteristics is presented. This diagnosis concept was verified and tested using data from simulating program and large data files from power plants archives (DCS).
Rocznik
Tom
Strony
85--94
Opis fizyczny
Bibliogr. 4 poz., wykr.
Twórcy
autor
  • Institute of Heat Engineering, Warsaw University of Technology, 21-25 Nowowiejska Str., 00-650 Warsaw, Poland
  • Institute of Heat Engineering, Warsaw University of Technology, 21-25 Nowowiejska Str., 00-650 Warsaw, Poland
  • Institute of Heat Engineering, Warsaw University of Technology, 21-25 Nowowiejska Str., 00-650 Warsaw, Poland
autor
  • Institute of Heat Engineering, Warsaw University of Technology, 21-25 Nowowiejska Str., 00-650 Warsaw, Poland
Bibliografia
  • 1. Krzyżanowski J., Krzyślak P., Głuch J.: On application of statistic to verification of turbomachinery calculation methods, pres. at the Intl Gas Turbine and Aeroengine Congress and Exposition Cologne Germany June 1-4, 1992
  • 2. Lewandowski J., Miller A. Operation of Steam Turbines under Off-Design Conditions, Publishers of Warsaw Univ. of Techn., 1992 (in Polish)
  • 3. Bujalski W.: Method of Load Distribution in CHP Plant Controlled by Distributed Control Systems (DCS), Ph.D. Thesis, Warsaw Univ of Techn., Warsaw 2002
  • 4. Badyda K.: Problems of mathematical modelling of power installations, Publishersd of Warsaw Univ of Techn., Warsaw 2001.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM2-0022-0007
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.