Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Badanie mikrostruktury złączy zgrzewanych punktowo ze stali HSLA340 I DP600
Języki publikacji
Abstrakty
The paper presents results of metallographic investigations of spot welds made of high-strength steel HSLA340 and dual-phase DP600 steel. Low-carbon martensite microstructure was found in the weld nugget of HSLA steel. The DP600 steel shows martensite and bainite microstructure. For both steels, no carbides of microadditives were found because they dissolved in liquid nugget and could not precipitate again because of rapid heat abstraction. Moreover, no transcrystallisation was found in both steels, which proves good mixing of the materials within the weld.
W artykule opisano wyniki badań metalograficznych zgrzein punktowych wykonanych ze stali o podwyższonej wytrzymałości HSLA340 i dwufazowej stali DP600. Badania wykazały, ze jądro zgrzeiny dla stali HSLA ma mikrostrukture martenzytu niskowęglowego, a dla stali DP600 martenzytu i bainitu. Dla obu gatunków stali w zgrzeinie nie obserwowano węglików mikrododatków stopowych, gdyż w czasie tworzenia ciekłego jądra zostały one rozpuszczone, a w wyniku szybkiego odprowadzania ciepła do elektrod nie zdołały sie ponownie wydzielić. Ponadto dla obu gatunków stali zaobserwowano brak transkrystalizacji, co świadczy o dobrym wymieszaniu sie materiałów w obrebie zgrzeiny.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
1081--1086
Opis fizyczny
Bibliogr. 12 poz., rys.
Twórcy
autor
autor
autor
- Student of Mechanical Faculty of Wroclaw University of Technology - The Rudolf Haimann Students' Scientific Circle
Bibliografia
- [1] E. Rusinski, A. Kopczynski, J. Czmochowski, Tests of thin-walled beams joined by spot welding, Journal of Materials Processing Technology 157-158, p.405-409 (2004).
- [2] R. Kuziak, R. Kawalla, S. Waengler, Advanced High Strength Steels for Automotive Industry, Archives of Civil and Mechanical Engineering 8, 2, 103-117 (2008).
- [3] M. Lachowicz, W. Nosko, Welding of constructional steel Weldox 700, Welding Technology Review, 1 (in Polish), 13-18 (2010).
- [4] A. Ambroziak, A. Tobota, K. Tokarz, P. Kustron, Examination of thin-walled steel joints spot-welded and plug-welded, Welding Technology Review 5 (in Polish), 6-11 (2008).
- [5] F. Grosman, Modern steels for drawing sheets for automotive industry, Plastic forming of Metals 4, 5-15 (in Polish) (2002).
- [6] Advanced high strength steel (ahss) application guidelines, international iron & steel institute, Committee on Automotive Applications, March 2005, http:// www.ulsab-avc.org, 15.10.2012
- [7] W.C. Leslie, The physical Metallurgy of Steels, McGraw-Hill, Tokyo, Japan, (1981).
- [8] A. Niechajowicz, A. Tobota, Dynamic tension testing of DP600, DP800 steel and AL6061 T4 alloy sheets by means of rotar hammer, Archives of Metallurgy and Materials 54, 3, 647-657.
- [9] A. Bag, K.K. Ray, Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual Phase Steels, Metall. Mat. Trans. 30A, 1999.
- [10] ULSAB-AVC Body Structure Materials, Technical Transfer Dispatch No. 6, May, 2001. Lanzillotto C.A.N and Pickering F.B.: Structure-Property Relationships in Dual-Phase Steels, Met. Sci. 16, 371-382 (1982).
- [11] J. Siwonia, Comparable analysis of resistance welded and redrawed joints properties, MSc. thesis under supervision of Dr. Pawel Kustron, Wroclaw University of Technology 2011.
- [12] A. Ambroziak, A. Tobota, K. Tokarz, P. Kustron, Testing of thin walled steel joints fabricated by spot welding and plug welding. Welding International 25, 4, 277-282 (2011).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM1-0011-0043