PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A study on performance of planing-wing hybrid craft

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
A hybrid craft is defined as a combination of different lifting surfaces. The lift force can be of aerodynamic or hydrodynamic character. This research deals with the conditions of using planing mono-hulls equipped with a couple of wings, called planing-wing hybrid craft. A parametric study is conducted by using Vortex Lattice Method to determine feasibility of using an aerodynamic wing mounted to planing craft. It has been determined that the wing area should be more than twice as much as the wetted surface of the craft, to get an effective wing for planing craft. Furthermore, the wing should be so designed as to obtain its high aspect ratio. Maximum lift force contribution resulting from different wing configurations considered in this study is less than 35 percent of the total hydrodynamic lift force at an arbitrary condition. On this basis it may be concluded that the wing may be effectively used only in special conditions, hence this is not recommended for general application.
Słowa kluczowe
Rocznik
Tom
Strony
16--22
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
  • Faculty of Marine Technology, Amirkabir University of Technology, Somayyeh Str., Hafez Ave. Tehran, Iran POBox: 5875-4413, hamidz@aut.ac.ir
Bibliografia
  • 1. Matveev K. I., Dubrovsky V. A.: Aerodynamic Characteristics of a Hybrid Trimaran Model. Ocean Engineering, 34(3-4),2007.
  • 2. Shipps, P. R.: Hybrid ram-wing/planning craft - today’s raceboats, tomorrow’s outlook. AIAA/SNAME Advanced Marine Vehicles Conference, 1976
  • 3. Ward, T. M., Goelzer, H. F., Cook, P. M.: Design and performance of the ram wing planning craft - KUDU II. AIAA/SNAME Advanced Marine Vehicles Conference, 1978
  • 4. Privalov, E. I., Kirillovikh, V. N.: Transport amphibious platforms: a new type of high-speed craft. Proceedings of Ekranoplans & Very Fast Craft Workshop, 1996
  • 5. Doctors, L. J.: Analysis of the efficiency of an ekranocat: a very high speed catamaran with aerodynamic alleviation. International Conference on Wing In Ground Effect Craft (WIGs ‘97), RINA, 1997
  • 6. www.freepatentonline.com
  • 7. Collu M., Patel M. H., Trarieux F.: High speed marine vehicles with aerodynamic surfaces: development of a dynamic model for a novel configuration. Cranfield Multi Strand Conference, 6-7 May 2008. Cranfield, Bedfordshire, UK
  • 8. Collu M., Patel M. H., Trarieux F.: A Unified Mathematical Model for High Speed Hybrid (Air and Waterborne)Vehicles., 2nd International Conference on Marine Research and Transportation, 2007
  • 9. Collu M., Patel M. H., Trarieux F.:A Mathematical Model to analyze the Static Stability of Hybrid (Aero hydrodynamically supported) vehicles. 8th Symposium on High Speed Marine Vehicles 2008 (HSMV08), Naples, Italy, 2008
  • 10. www.seaphantom.com
  • 11. Korneev, N.V., Taranov, A.E., Treshkov, V.K.: Efficient software for numerical calculation of ekranoplans (WIG craft) and hydrofoils. Proc. Workshop WISE up to Ekranoplan GEMS,The University of New South Wales, Sydney, Australia, pp. 263-266, 1998.
  • 12. Bakhshandehrostamai A. Ghasemi H.: Design and Analysis of 2D Wing In Ground Effect Based on Maximum Lift-Drag Ratio.,MSc thesis, Amirkabir University of Technology, Tehran, Iran, 2008
  • 13. Matjasic K. at al.: WIG (Wing In Ground effect) craft in military and paramilitary applications. NATO Conference, TO-AVT Symposium, April 7 -11, 2003
  • 14. Park K. and Lee J.: Influence of endplate on aerodynamic characteristics of low-aspect-ratio wing in ground effect. Journal of Mechanical Science and Technology, Vol.22, 2008, pp. 2578~2589,
  • 15. Husa B.: WIG configuration development from component matrix. Orion technology, Aerospace design and engineering, Internal report, 2000
  • 16. Yun L. Bliault A., Doo J.: WIG craft and Ekranoplan; Ground effect craft technology. ISBN 978-1-4419-0041-8 e-ISBN 978-1-4419-0042-5, Springer, 2010
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWM1-0010-0027
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.