Degradacja systemów powłoka nanokrystaliczna - stalowe podłoże w warunkach niszczenia kawitacyjnego

Krella, A.

Artykuł - szczegóły

Tytuł artykułu

Degradacja systemów powłoka nanokrystaliczna - stalowe podłoże w warunkach niszczenia kawitacyjnego

Autorzy

Krella A.

Treść / Zawartość

Pełne teksty:

ZN IMP556-1515-2012_Krella_A-Degradacja nanostrukturalnych powłok

Pobierz

Identyfikatory

Warianty tytułu

Języki publikacji

Abstrakty

Słowa kluczowe

materiały nanokrystaliczne niszczenie kawitacyjne Arc-PVD podłoże stalowe

Wydawca

Wydawnictwo Instytutu Maszyn Przepływowych PAN

Czasopismo

Zeszyty Naukowe Instytutu Maszyn Przepływowych Polskiej Akademii Nauk w Gdańsku

Rocznik

2012

Tom

nr 556/1515

Strony

1--126

Opis fizyczny

Bibliogr. 305 poz., rys., tab.

Twórcy

autor

Krella A.

Instytut Maszyn Przepływowych Polskiej Akademii Nauk w Gdańsku, Pracownia Kawitacji, alicja.krella@imp.gda.pl

Bibliografia

1. Aifantis, E.C., "Deformation and failure of bulk nanograined and UFG materials" Mater. Sci. Eng. A 503 (2009) 190
2. Allen W.A., Rogers J.W., Penetration of a rod into a semi-infinite target, Journal of the Franklin Institute 272 (1961) 275-284
3. Arndt R.E.A., Keller A.P., Water quality effects on cavitation inception in a trailing vortex, Transaction of the ASME 114 (1992) 430
4. Arndt R.E.A., Paul S., Ellis Ch.R., Application of piezoelectric film in cavitation research, Journal of Hydraulic Engineering June (1997) 539
5. Arora M., Ohl C.-D., Morch K.A., Cavitation inception on microperticles: a self-propelled Particle Accelerator, Physical Review Letters 92 (2004) 174501-1
6. Asaro RJ, Krysl P, Kad B., Deformation mechanism transitions in nanoscale fcc metals. Philos Mag Lett. 83 (2003) 733
7. Avellan F., Farhat M., Shock pressure generated by cavitation vortex collapse, International Symposium on Cavitation Noise and Erosion in Fluid Systems, ASME 88 (1989) 119
8. Barata A., Cunha L., Moura C., Characterisation of chromium nitride films produced by PVD techniques, Thin Solid Films, 398-399 (2001) 501
9. Batista J.C.A., Godoy C., Buono V.T.L., Matthews A., Characterisation of duplex and non-duplex (TiN, Al)N and Cr–N PVD coatings, Mat Sci Eng A 336 (2002) 39
10. Będkowski W., Gasiak G., Lachowicz C., Lichtarowicz A., Lagoda T., Macha E., Relations between cavitation erosion resistance of materials and their fatigue strength under random loading, Wear 230 (1999) 201
11. Benedavid A, Martin P.J., Netterfeld R.P., Kinder T.J., The properties of TiN films deposited by filtered arc evaporation, Surf. Coat. Technol., 70 (1994) 97
12. Benjamin, T.B. and Ellis, A.T. The collapse of cavitation bubbles and the pressures thereby produced against solid boundaries. Phil. Trans. Roy. Soc., London, Ser. A, 260 (1966) 221
13. Berrios J.A., Teer D.G., Puchi-Cabrera E.S., Fatigue properties of 316L stainless steel coated with different TiNx deposits, Surf. Coat. Technol.148 (2001) 179
14. Berthe L., Fabbro R., Peyre P., Tollier L., Bartnicki E., Shock waves from a water-confined laser-generated plasma, J. Appl. Phys. 82 (1997) 2826
15. Bertrand G., Mahdjoub H., Meunier C., A study of the corrosion behaviour and protective quality of sputtered chromium nitride coatings, Surf. Coat. Technol., 126 (2000) 199
16. Bielawski M., Seo D., Residual stress development in UMS TiN coatings, Surf. Coat. Technol. 200 (2005) 1476
17. Billgren P., The use of nitride and carbide coatings on high speed steel tools, Speed steel, Technical Report, SP 22/84, Short Course on Nitride and Carbide Coatings, September 1985, Neuchetel, Switzerland
18. Blake J.R., Tomita Y., Tong R.P., The Art, Craft and Science of Modelling Jet Impact in a Collapsing Cavitation Bubble, Applied Scientific Research 58 (1998) 77
19. Bobylev S.V., Gutkin M. Yu., Ovid’ko I.A., Transformations of grain boundaries in deformed nanocrystalline materials, Acta Mater.52 (2004) 3793
20. Bogachev I.N., Mints R.I., Cavitational erosion and means for its prevention, Israel Program for Scientific Translations, Jerusalem, 1966.
21. Bourne N.K., On the collapse of cavities, Shock wave 11 (2002) 447
22. Bourne N.K., Millett J.C.F., Gray III G.T., On the shock compression of polycrystalline metals, J. Mater. Sci. 44 (2009) 3319
23. Bregliozzi G., Schino A. Di, Ahmed S.I.-U., Kenny J.M., Haefke H., Cavitation wear behaviour of austenitic stainless steels with different grain sizes, Wear 258 (2005) 503
24. Brennen Ch. E., Cavitation and bubble dynamics. Oxford University Press 1995
25. Broszeit E., Friedrich C., Berg G., Deposition, properties and applications of PVD CrxN coatings, Surf. Coat. Technol., 115 (1999) 9
26. Buecken B., Leonhardt G., Wilberg R., Hoeck K., Spies H.J., Direct combination of plasma nitriding and PVD hardcoating by a continuous process, Surf. Coat. Technol., 68/69 (1994) 244
27. Bull S.J., Jones A.M., Multilayer coatings for improved performance, Surf. Coat. Technol. 78 (1998) 173
28. Bull S.J., Rickerby D.S., Robertson T., Hendry A., The abrasive wear resistance of sputter ion plated titanium nitride coatings, Surf. Coat. Technol., 36 (1988) 743
29. Buogo S., Cannelli G.B., Implosion of underwater spark-generated bubble ans acoustic energy evaluation using the Rayleigh model, J. Acoust. Soc. Am. 111 (2002) 2594
30. Burakowski T., Wierzchoń T., Inżynieria powierzchni metali, WNT, Warszawa 1995
31. Burakowski T., Areologia. Powstanie i rozwój, Wydawnictwo Instytutu Technologii Ekspoloatacji PIB, Radom 2007
32. Burnett P.J., Rickerby D.S., The relationship between hardness and scratch adhesion, Thin Solid Films, 154 (1987) 403
33. Cai B., Kong Q.P., Lu L., Lu K., Interface controlled diffusional creep of nanocrystalline pure copper, Scripta Materialia 41 (1999) 755
34. Cairney J.M., Tsukano R., Hoffman M.J., Yang M., Degradation of TiN coating under cyclic loading, Acta Mater.52 (2004) 3229
35. Capolungo L., Cherkaoui M., Qu J., On the elastic–viscoplastic behavior of nanocrystalline materials, Int J Plasticity23 (2007) 561
36. Capolungo L., Jochum C., Cherkaoui M., Qu J., Homogenization method for strength and inelastic behavior of nanocrystalline materials, Int J Plasticity21 (2005) 67
37. Carlton C.E., Ferreira P.J., What is behind the inverse Hall–Petch effect in nanocrystalline materials? Acta Mater.55 (2007) 3749
38. Carsley J.E., Ning J., Millian W.W., Hackney S.A., Aifantis E.C., A simple, mixtures-based model for the grain size dependence of strength in nanophase metals, Nanostructured Materials 5 (1995) 441
39. Chang J.T., Yeh C.H., He J.L. Chen K.C., Cavitation erosion and corrosion behavior of Ni–Al intermetallic coatings, Wear 255 (2003) 162
40. Černy R., Kužel R., Valvoda V., Kadlec S., Musil J., Microstructure of titanium nitride thin films controlled by ion bombardment in a magnetron-sputtering device, Surf. Coat. Technol., 64 (1994) 111
41. Chen D., Structural modeling of nanocrystalline materials, Computational Materials Science 3 (1995) 327
42. Chen J.-Y., Yu G.-P., Huang J.-H., Corrosion behaviour and adhesion of ion-plated films on AISI 304 steel, Mat. Chem. Phys. 65 (2000) 310
43. Chen M., Ma E., Hemker K.J., Sheng H., Wang Y., ChengX., Deformation Twinning in Nanocrystalline Aluminum, Science 300, (2003) 1275
44. Chen S., Liu L., Wang T., Investigation of the mechanical properties of thin films by nanoindentation, considering the effects of thickness and different coating-substrate combinations, Surf. Coat. Technol.191 (2005) 25
45. Chokshi A.H., An analysis of creep deformation in nanocrystalline materials, Scripta Mater. 34 (1996) 1905
46. Chokshi, AH, Rosen, A., Karch, J. and Gleiter, H., On the Validity of the Hall-Petch Relationship in Nanocrystalline Materials, Scripta Mater. 23 (1989) 1679
47. Chou W.-J., Yu G.,-P. Huang J.-H., Mechanical properties of TiN film coatings on 304 stainless steel, Surf. Coat. Technol. 149 (2002) 7
48. Chow, G.-M.; Gonsalves, K.E., Nanotechnology: Moleculary Designed Materials, ACS, Washington 1996, DC,
49. Chung J., Waas A.M., Compressive response of circular cell polycarbonate honeycombs under inplane biaxial static and dynamic loading. Part I: experiments, Int J Impact Eng 27 (2002) 729
50. Coble R.L., A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials, Journal of Applied Physics 34 (1963) 1679
51. Combadiere L., Machet J., Reactive magnetron sputtering deposition of TiN films. I. Influence of the substrate temperature on structure, composition and morphology of the films, Surf. Coat. Technol., 88 (1996), 17
52. Conrad H., Narayan J., On the grain size softening in nanocrystalline materials, Scripta mater. 42 (2000) 1025
53. Curtis, A.; Wilkinson, Ch.; Nanotechniques and approaches in biotechnology, Trends in Biotechnology 3, (2001) 97
54. Czyżniewski A., Powłoki Ti-C:H wytwarzane metodą impulsowego reaktywnego rozpylania magnetronowego, Inżynieria Materiałowa 6 (2000) 258
55. Czyżniewski A., Wytwarzanie i własciwości powłok nanokrystalicznych WC i Nanokompozytowych WC/a-C:H, 13th International Summer School „Modern Plasma Surface Technology”, Koszalin 2002
56. Dalla Torre F., Van Swygenhoven H., Victoria M.. 2002, Nanocrystalline electrodeposited Ni: microstructure and tensile properties, Acta Materialia 50 (2002) 3957
57. Danielewski M., Gil A., Wendler B., Żurek Z., 2003, Powłoki hybrydowe dziś i jutro, Inżynieria Materiałowa 6 (2003) 439
58. Defense Nanotechnology Research and Development program, 2007, http://www.nano.gov/html/res/pdf/DefenseNano2007.pdf
59. Demkowicz M.J., Argon A.S., Farkas D., Frary M., Simulation of plasticity in nanocrystalline silicon, Philosophical magazine 87 (2007) 4253
60. Dobrzański L.A., Współczesne tendencje rozwojowe nauki o materiałach i inżynierii materiałowej, Inżynieria Materiałowa 6 (2003) 271
61. Dobrzański L.A., Kwaśny W., Pakula D., Kriz A., Wpływ warunków nanoszenia na własności powłok Ti+Ti(CxN1-x) uzyskanych w procesie PVD na podłożu ze spiekanej stali szybkotnącej, 13th International Summer School „Modern Plasma Surface Technology”, Koszalin 2002
62. Dobrzański L.A., Polok M., Adamiak M., Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Journal of Materials Processing Technology 164–165 (2005) 843
63. Dobrzański, L.A., Materiały inżynierskie i projektowanie materiałowe, WNT, Warszawa 2006
64. Drexler K.E., Engines of Creation: The Coming Era of Nanotechnology, Anchor Press/Doubleday, New York 1986
65. Dugue C., Fruman D.H., Billard J-Y., Cerrutti P., Dynamic criterion foe cavitation of bubbles, Transactions of the ASME 114 (1992) 250
66. Duncan J.H., Calculations of the collapse of a cavity in the vicinity of a compliant wall, International Symposium on Cavitation Noise and Erosion in Fluid Systems, ASME 88 (1989) 127
67. Edelstein, A.S., Cammarata, R.C., Nanomaterials: Synthesis, Properties and Applications, IOP 1996, Bristol, UK,
68. Eisenberg Ph., Preiser H.S., Thiruvengadam A., On the mechanisms of cavitation damage and methods of protection, Trans SNAME 73 (1965)
69. Elstner F., Erlich A., Giegengack H., Kupfer H., Richter F., 1994, Structure and properties of titanium nitride thin films deposited at low temperatures using direct current magnetron sputtering. J. Vac. Sci. Technol. A, 12(1994) 476
70. Endo K., Okada T., Baba Y.: Fundamental Studies on Cavitation Erosion. Bulletin of the JSME 12 (1969) 729
71. Fan G.J., Chooa H., Liawa P.K., Lavernia E.J., A model for the inverse Hall–Petch relation of nanocrystalline materials, Mat Sci Eng A 409 (2005) 243
72. Farkas D., Fracture Resistance of Nanocrystalline Ni, Metallurgical and Materials Transactions A 38 (2007) 2168
73. Fedorov A.A., Gutkin M.Yu., Ovid’ko I.A., Transformations of grain boundary dislocation pile-ups innano- and polycrystalline materials, Acta Materialia 51 (2003) 887
74. Fedotkin I., Yachno O., Some problems of development of cavitation technologies for industry applications, CAV2001, session A4.004
75. Feller H.G., Kharrazi Y., Cavitation erosion of metals and alloys, Wear 93 (1994) 249
76. Feynman, R.P., There’s Plenty of Room at the Bottom, Engineering and Science (California Institute of Technology, 1960), www.zyvex.com/nanotech/feynman.html
77. Final Report, 2004, “Nanoscience and nanotechnologies: opportunities and uncertainties” –The Royal Society & The Royal Academy of Engineering, http://www.nanotec.org.uk/finalReport.htm
78. Forrest P.G., Fatigue of metals, Pergamon Press 1962
79. Fortes Patella R., Reboud J-L., A new approach to evaluate the cavitation erosion power, J.Fluids Eng., Trans. ASME 120 (1998) 335
80. Friedrich C., Berg G., Broszeit E., Rick F., Holland J., PVD CrxN coatings for tribological application on piston rings, Surf. Coat. Technol. 97 (1997) 661
81. Fu W., Zheng Y., He X., Resistance of a high nitrogen austenitic steel to cavitation erosion, Wear 249 (2001) 788
82. Fujikawa S., Akamatsu T., Effects of non-equilibrium consendation of vapour on the pressure wave produced by collapse of a bubble in liquid, J Fluid Mech97-3 (1980) 481
83. Garcia R., Hammitt F.G., Cavitation damage and correlations with material and fluid properties, J Basic Eng. 89 (1967) 753
84. Gautier C. Moussaoui H. Elstner F., Machet J., Comparative study of mechanical and structure properties of CrN by d.c. magnetron sputtering and vacuum arc evaporation, Surf. Coat. Technol., 86-87 (1996) 254
85. Geng J., Schuler A., Oelhafen P., Gantenbein P., Changing TiN film morphology by „plasma biasing”, J. Appl. Phys. 86 (6) (1999) 3460
86. Gleiter H., Nanostructured materials: basic concepts and microstructure, Acta Mater. 48 (2000) 1
87. Gomółka E. Szajnok A., Chemia wody. Arkady, Warszawa 1987
88. Grabski M.W., Struktura granic ziarn w metalach, Katowice, Wyd. Śląsk 1969
89. Grant W.K., Loomis C., Moore J.J., Olson D.L., Mishra B., Perry A.J., Charakteryzation of hard chromium nitride coatings deposited by cathodic arc vapor deposition, Surf. Coat. Technol. 86-87 (1996) 788
90. Gryaznov V.G., Polonsky I.A., Romanov A.E., Trusov L.I., Size effects of dislocation stability in nanocrystals, Phys.Rev. B 44 (1991) 42
91. Gu P., Kad B.K., Dao M., A modified model for deformation via partial dislocations and stacking faults at the nanoscale, Scripta Materialia 62 (2010) 361
92. Guruvenkt S., Mohan Rao G., Effect of ion bombardment and substrate orientation on structure and properties of titanium nitride films deposited by unbalanced magnetron sputtering, J. Vac. Technol. A 20(3) (2002) 678
93. Gutkin M.Yu., Ovid’ko I.A., Plastic Deformation in Nanocrystalline Materials, edi. R.Hull, Springer-Verlag Berlin 2004
94. Gutkin M.Yu., Ovid’ko I.A., Pande C.S., Theoretical models of plastic deformation processes in nanocrystalline materials, Rev. Adv. Mater. Sci. 2 (2001) 80
95. Hahn H., Mondal P., Padmanabhan K.A., Plastic deformation of nanocrystalline materials, NanoStructured Mataials, 9 (1997) 603
96. Hahn H., Padmanabhan K.A., Mechanical response of nanostructured materials, NanoStructured Materials 6 (1995) 191
97. Haibach E., The allowable stresses under variable amplitude loading of welded joints, Proc. Fatigue of Welded Structures 6 (1970) 328
98. Hall E.O., The deformation and ageing of mild steel: III Discussion of results, Proceedings of the Physical Society. Section B 64 (1951) 747
99. Hallander J.F.E., Bark G., Influence of time displacement and other parameters on the interaction between neighbouring cavities in the generation of propeller cavitation noise, ASME Fluids Engineering Division Summer Meeting, June 22-26, Vancouver, BC, Canada. ASME, New York, NY, USA. (1997) Paper no. FEDSM97-3238, 1997
100. Hammitt F.G., Cavitation and multiphase flow phenomena, McGraw-Hill Inc., 1980
101. Han S., Lin J.H., Kuo J.J., He J.L., Shih H.C., The cavitation-erosion phenomenon of chromium nitride coatings deposited using cathodic arc plasma deposition on steel, Surf. Coat. Technol. 161 (2002) 20
102. Hattori S., Hirose T., Sugiyama K., Prediction method for cavitation erosion based on measurement of bubblecollapse impact loads, Wear 269 (2010) 507
103. Hattori S., Ishikura R., Revision of cavitation erosion database and analysis of stainless steel data, Wear 268 (2010) 109
104. Hattori S., Mori H., Okada T., Quantitative evolution of cavitation erosion, Journal of Fluids Engineering 120 (1998) 179
105. Hattori S., Nakao E., Cavitation erosion mechanisms and quantitative evaluation based on erosion particles, Wear 249 (2002) 839
106. He X-m., Baker N., Kehler B.A., Walter K.C., Nastasi M., Nakamura Y., Structure, hardness, and tribological properties of reactive magnetron sputtered chromium nitride films, J. Vac. Sci. Technol., A 18(1) (2000) 30
107. Heathcock C.J., Protheroe B.E., Ball A., Cavitation erosion of stainless steels, Wear 81 (1982) 311
108. Helmersson U. Johanson B.-O., Sundgren J.-E., Hentzell H.T.G., Billgren P., Adhesion of titanium nitride coatings on high-speed steels J. Vac. Sci. Technol. A, 3(2) (1985) 308
109. Herr W., Matthes B., Broszeit E., Kloos K. H., Fatigue performance and tribological properties of r.f. sputtered TiN coatings, Surf. Coat. Technol.57 (1993) 43
110. Hillert H., On the theory of normal and abnormal grain growth, Acta Metallica 13 (1965) 227
111. Hobbs J.M., Experirnce with a 20-kc cavitation erosion test, ASTM 408 (1967) 159
112. Hogmark S., Hedenqvist P., Jacobsen S., Tribological properties of thin hard coatings: demands and evaluation, Surf. Coat. Technol. 90 (1997) 247
113. Hotta S., Itou Y., Saruki K., Arai T., Fatigue strength AT a number of cycles of thin hard coated steel with quench-hardened substrates, Surf. Coat. Technol., 73 (1995) 5
114. Huang H.L., A study of dislocation evolution in polycrystalline copper during low cycle fatigue at low strain amplitudes, Mat Sci Eng A 342 (2003) 38
115. Huang J., Zhang H., Level set method for numerical simulation of a cavitation bubble, its growth, collapse and rebound near a rigid wall, Acta Mech Sin 23 (2007) 645
116. Huang S., Mahamad A.A., Modeling of cavitation bubble dynamics in multicomponent mixtures, Journal of Fluids Engineering 131 (2009) 031301-1
117. Hugo R.C., Kung H., Weertman J.R., Mitra R., Knapp J.A., Follstaedt D.M., In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films, Acta Mater. 51 (2003) 1937
118. Hurkmans T. Lewis D.B., Brooks J.S., Münz W.-D., Chromium nitride coatings grown by unbalanced magnetron (UBM) and combined arc/unbalanced magnetron (ABSTM) deposition techniques, Surf. Coat. Technol., 86-87 (1996) 192
119. Hurkmans T. Lewis D.B., Paritong H., Brooks J.S., Münz W.-D., Influence of ion bombardment on structure and properties of unbalanced magnetron grown CrN coatings, Surf. Coat. Technol., 114 (1999) 52
120. Ichikawa S., Miyazawa K., Ichinose H., Ito K., The microstructure of deformed nanocrystalline Ag and Ag/Fe alloy, Nanostructured Materials, 11 (1999) 1301
121. Iwai Y., Honda T., Yamaa H., Matsumura T., Larsson M., Hogmark S.: Evaluation of wear resistance of thin hard coatings by a new solid particle impact test, Wear 251 (2001) 861
122. Jakubowicz A., Orłoś Z., Wytrzymałość materiałów, WNT 1984
123. Jayaram V., Bhowmick S., Xie Z.-H., Math S., Hoffman M., Biswas S.K., Contact deformation of TiN coatings on metallic substrates, Mat Sci Eng A 423 (2006) 8
124. Jeong D.H., Erb U., Aust K.T., Palumbo G., The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni–P coatings, Scripta Materialia 48 (2003) 1067
125. Jia D., Ramesh K.T., Ma E., Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron, Acta Materialia 51 (2003) 3495
126. Jiang, B., Weng, G.J., A theory of compressive yield strength of nano-grained ceramics. Int. J. Plast. 20 (2004) 2007
127. Jones I.R., Edwards D.H., 1960, An experimental study of the forces generated by thecollapse of transient cavities in water, Journal of Fluid Mechanics 7 (1960) 596
128. Jurczyk M., Jankowska E., Nowak M., Jakubowicz J., 2002, Nanocrystalline titanium-type metal hydride electrodes prepared by mechanical alloying, Journal of Alloys and Compounds 336 (2002) 265
129. Kanthale P.M., Gogate P.R., Pandit A.B., Wilhelm A.M. Dynamics of cavitational bubbles and design of a hydrodynamic cavitational reactor: cluster approach, Ultrasonics Sonochemistry 12 (2005) 441
130. Karimi A., Avellan F., Comparison of erosion mechanisms in different types of cavitation, Wear 113 (1986) 305
131. Karimi A., Leo W.R., Phenomenological model for cavitation erosion rate computation, Mat Sci Eng A 95 (1987) 1
132. Kato H., Recent Advances and Future Proposal on Cavitation Erosion Research, International STG/HSVA Symposium on Propulsors and Cavitation, Hamburg, June 1992
133. Ke M., Hackney S.A., Milligan W.W., Aifantis E.C., Observation and measurement of grain rotation and plastic strain in nanostructured metal thin films, Nanostructured Materials 5 (1995) 689
134. Kim H.S., A composite model for mechanical properties of nanocrystalline materials, Scripta Materialia, 39 (1998) 1057
135. Kim H.S., Bush M.B., The effects of grain size and porosity on the elastic modulus of nanocrystalline materials, NanoStructured Materials 11 (1999) 361
136. Kim H.S., Estrin Y., Phase mixture modeling of the strain rate dependent mechanical behavior of nanostructured materials. Acta Mater. 53 (2005) 765
137. Kim H.S., Estrin Y., Bush M.B., Plastic deformation behaviour of fine-grained materials, Acta Mater. 48 (2000) 493
138. Kim S.S., Han J.G., Lee S.Y., Deposition behaviours of CrN films on the edge area by cathodic arc plasma deposition process, Thin Solid Films 334 (1998) 133
139. Knapp R. T., Daily J. W., Hammit F.G., Cavitation, McGraw-Hill, New York 1970
140. Kobayashi Sh., Tsurekawa S., Watanabe T., Roles of structure-dependent hardening at grain boundaries and triple junctions in deformation and fracture of molybdenum polycrystals, Mat Sci Eng A 483-484 (2008) 712
141. Kocańda S., Zmęczeniowe pękanie metali, WNT, Warszawa 1985
142. Kocańda S., Szala J., Podstawy obliczeń zmęczeniowych, PWN, Warszawa 1997
143. Koch C. C. Structural nanocrystalline materials: an overview, J Mater Sci 42 (2007) 1403
144. Koch C.C., Scattergood R.O., Murty K.L., The Mechanical Behavior of Multiphase Nanocrystalline materials – overview, JOM 59 (2007) 66
145. Kong X.; Qiao L.; Liu Y. Wear behavior of nanocrystalline Cu-Zn alloy, Journal of Materials Engineering and Performance 12 (2003) 312
146. Kozirew S.P., On cumulative collapse of cavitation cavities, Transaction of the ASME 90 (1968) 116
147. Krause H., Mathias M., Investigation of cavitation erosion using x-ray residual stress analysis, Wear 119 (1987) 343
148. Kula P., Inżynieria warstwy wierzchniej, Wydawnictwo Politechniki Łódzkiej, Łódź 2000
149. Kumar K.S., Suresh S., Chisholm M.F., Horton J.A., Wang P., Deformation of electrodeposited nanocrystalline nickel, Acta Mater.51 (2003) 387
150. Kyzioł L., Świątek K., Modelowanie i weryfikacja doświadczalna przebijalności tarczy pociskami, Zeszyty Naukowe Akademii Marynarki Wojennej Rok XLX Nr 2 (177) 2009
151. Lauterborn W., Bolle H., Experimental investigation of cavitation-bubble collapse in the neighbourhood of a solid boundary, J Fluid Mech. 72 (1975) 391
152. Lebedev A.A., Kosarchuk V.V., Influence of phase transformations on the mechanical properties of austenitic stainless steels, Int. J. Plast. 16 (2000) 749
153. Li, J.,Weng, G.J., A secant-viscosity composite model for the strain-rate sensitivity of nanocrystalline materials. Int. J. Plast. 23 (2007) 2115
154. Liao X. Z., Zhou F., Lavernia E. J., Srinivasan S. G., Baskes M. I., He D. W., Zhu Y. T., Deformation mechanism in nanocrystalline Al: Partial dislocation slip, Applied Physics Letters 83 (2003) 632
155. Lima M.M., Godoy C., Modenesi P.J., Avelar-Batista J.C., Davoson A., Matthews A., Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC–Co thermally sprayed coatings, Surf. Coat. Technol. 177–178 (2004) 489
156. Liu C., Bi Q., Ziegele H., Leyland A., Mattews A., Structure and corrosion properties of PVD Cr-N coatings, J. Vac. Sci. Technol. A 20(3) (2002) 772
157. Lousa A., Romero J., Martinez E., Esteve J., Montala F., Carreras L., Multilayered chromium/ chromium nitride coatings for use in pressure die-casting, Surf. Coat. Technol., 146-147 (2001) 268
158. Ma L.W., Cairney J.M., Hoffman M., Munroe P.R., Deformation mechanisms operating during nanoindentation of TiN coatings on steel substrates, Surf. Coat. Technol. 192 (2005) 11
159. Maheo D., Poitevin J.-M., Microstructure and electrical resistivity of TiN films deposited on heated and negatively biased silicon substrates, Thin Solid Films, 237 (1994) 78
160. Mann B.S., Arya V., An experimental study to correlate water jet impingement erosion resistance and properties of metallic materials and coatings, Wear 253 (2002) 650-661
161. Mann B.S., Boronizing of cast martensitic chromium nickel stainless steel and its abrasion and cavitation-erosion behaviour, Wear 208 (1997) 125
162. Markmann J., Bunzel P., Rosner H., Liu K.W., Padmanabhan K.A., Birringer R., Gleiter H., Weissmuller J., Microstructure evolution during rolling of inert-gas condensed palladium, Scripta Materialia 49 (2003) 637
163. Marschall H.B., Morch K.A., Keller A.P., Kjeldsen M., Cavitation inception by almost spherical solid particles in water, Physics of fluids, 15 (2003) 545
164. Martineau R.L., Prime M.B., Duffey T., Penetration of HSLA-100 steel with tungsten carbide spheres at striking velocities between 0.8 and 2.5 km/s, International Journal of Impact Engineering 30 (2004) 505
165. Martinez E., Romero J., Lousa A., Esteve J., Wear behaviour of nanometric CrN/Cr multilayers, Surf. Cost Technol., 163-164 (2003) 571
166. Marynin V. H., Erosion of vacuum-ARC Ti–N coatings, Materials Science 39 (2003) 447
167. Masumura R. A., Hazzledine P. M., Pande C. S., Yield stress of fine grained materials, Acta Mater. 46 (1998) 4527
168. Mathias M., Gocke A., Pohl M., The residual stress, texture and surface changes in steel induced by cavitation, Wear 150 (1991) 11
169. Matthews A., Leyland A., Holmberg K., Ronkainen H., Design aspects for tribological surface coatings, Surf. Coat. Technol. 100-101 (1998) 1
170. Matula T.J., Single-bubble sonoluminescence in microgravity, Ultrasonics 38 (2000) 559
171. Matula T.J., Roy R.A., Mourad P.D., Comparison of multibubble and single-bubble sonoluminescence spectra, Physical revive Letters 75 (1995) 2602
172. Mayerhofer P.H., Kunc F., Musil J., Mittterer C., A comparative study on reactive and non-reactive unbalanced magnetronsputter deposition of TiN coatings, Thin Solid Films 415 (2002) 151
173. Mayrhofer P.H., Tichler G., Mitterer C., Microstructure and mechanical/thermal properties of Cr-N coatings deposited by reactive unbalanced magnetron sputtering, Surf. Coat. Technol., 142-144 (2001) 78
174. Mendala B., Swadźba L., Hetmańczyk M., Otrzymywanie i własności powłok z azotku chromu na stalach martenzytycznych, Inżynieria Materiałowa 5 (1999) 314
175. Meng L-J., dos Santos M.P., Characterisation of titanium nitride films prepared by d.c. reactive magnetron sputtering at different nitrogen pressures, Surf. Coat. Technol., 90 (1997) 64
176. Mercier S., Molinari A., Y. Estrin, Grain size dependence of strength of nanocrystalline materials as exemplified by copper: an elastic-viscoplastic modelling approach, J Mater Sci 42 (2007) 1455
177. Meyers M.A., Mishra A., Benson D.J., Mechanical properties of nanocrystalline materials, Progress in Materials Science 51 (2006) 427
178. Michalczewski R., Piekoszewski W., Szczerek M., Tuszyński W., Badanie zdolności do przenoszenia obciążeń testowej przekładni zębatej z kołami pokrytymi powłoką TiN, Problemy Eksploatacji 1 (2003) 247
179. Michalski A., Binh H.T., Nanokrystaliczne warstwy żelaza otrzymywane metodą impulsowo plazmową, Inżynieria Materiałowa 5 (1999) 288
180. Mishra R. S., McFadden S. X., Valiev R. Z., Mukherjee A. K., Deformation mechanisms and tensile superplasticity in nanocrystalline materials, JOM 51 (1999) 37
181. MNiSW - Raport, Nanonauka i nanotechnologia – Narodowa Strategia dla Polski – Raport, Warszawa 2006
182. Mori T., Fukuda S., Takemura Y., Improvment of mechanical properties of Ti/TiN multilayer film deposited by sputtering, Surf. Coat. Technol. 140 (2001) 122
183. Münsterer S., Kohlhof K.: Cavitation protection by low temperature TiCN coatings, Surf. Coat. Technol. 74-75 (1995) 642
184. Nalwa, H.S., Handbook of Nanostructured Materials and Nanotechnology, Academic Press 2000
185. Navinšek B. Panjan P., Milošev I., Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures, Surf. Coat. Technol., 97 (1997) 182
186. Nieh T.G., Wadsworth J., Hall–Petch relation in nanocrystalline Solids. Scr Metall Mater 25 (1991) 955
187. Nieh T.G., Wang J.G., Hall–Petch relationship in nanocrystalline Ni and Be–B alloys, Intermetallics 13 (2005) 377
188. NNI- Nanotech Facts, http://www.nano.gov
189. Nobre J.P., Dias A.M., Gras R., Resistance of a ductile steel surface to spherical normal impact indentation; use of pendulum machine, Wear 211 (1997) 226
190. Nogués, J.; Rao, K.V.; Inoue, A.; Suzuki, K., A STM study of the microstructure of amorphous and nanocrystalline Fe-Zr-B-Cu ribbons, NanoStruct Mater 5 (1995) 281
191. Noskova N.I., Deformation of nanocrystalline pure metals and alloys based on Fe and Al, Journal of Alloys and Compounds 434–435 (2007) 307
192. Numachi F. An experimental study of accelerated cavitation induced by ultrasonics, Journal of Basic Engineering 87 (1965) 967
193. Odén M., Almer J., Håkansson G., The effect of bias voltage and annealing on the microstructure and residual stress of arc-evaporated Cr-N coatings, Surf. Coat. Technol. 120-121 (1999) 272
194. Odén M., Ericsson C., Håkansson G., Ljungcrantz H., Microstructure and mechanical behaviour of arc-evaporated Cr-N coatings, Surf. Coat. Technol. 114 (1999) 39
195.Oettel H. Wiedemann R., Residual stress in PVD hard coatings. Sufr. Coat. Technol., 76-77 (1995) 265
196. Okada T. , Hattori S., Shimizu M., A fundamental study of cavitation erosion using a magnesium oxide single crystal (intensity and distribution of bubble collapse impact loads) Wear 186-187 (1995) 437
197. Okada, T., Iwai, Y., Hattori, S., Tanimura, N., Relation between impact load and the damage produced by cavitation bubble collapse, Wear 184 (1995) 231
198. Ovid’ko I. A., Deformation of nanostructures, Science 295 (2002) 2386
199. Ovid’ko I. A., Review on the fracture processes in nanocrystalline materials, J Mater Sci 42 (2007)1694
200. Ovid’ko I.A., Sheinerman A.G., Triple junction nanocracks in deformed nanocrystalline materials, Acta Materialia 52 (2004) 1201
201. Padilla H. A.; Boyce B. L., A Review of Fatigue Behavior in Nanocrystalline Metals Experimental Mechanics 50 (2010) 5
202. Padmanabhan K.A., Gleiter H., Optimal structural superplasticity in metals and ceramics of microcrystalline- and nanocrystalline-grain sizes, Mat Sci Eng A 381 (2004) 28
203. Pakieła Z., Mikrostrukturalne uwarunkowania właściwości mechanicznych nanokrystalicznych metali, Inżynieria Materiałowa 4 (2005) 175
204. Palumbo G., Thorpe S.J., Aust K.T., On the contribution of triple junctions to the structure and properties of nanocrystalline materials, Scripta Metallurgica et Materialia 24 (1990) 1347
205. Paris PC, Gomez RE, Anderson WE., A rational analytic theory of fatigue. Trend Eng 13 (1961) 9
206. Patsalas P., Charitidis C., Logothetidis S., The effect of substrate temperature and biasing on the mechanical properties and structure of sputtered titanium nitride thin films, Surf. Coat. Technol. 125 (2000) 335
207. Perry A.J., Valli J., Steinmann P.A., Adhesion scratch testing: a round-robined experiment. Surf. Coat. Technol., 36 (1988) 559
208. Petch N.J., 1953, The cleavage strength of polycrystals, Journal of the Iron Steel Institute 174 (1953) 25
209. Philipp A., Lauterborn W., Cavitation erosion by single laser-produced bubbles, J. Fluid Mech. 361 (1998) 75
210. Piekoszewski W., Wpływ powłok na zmęczenie powierzchniowe smarowanych stalowych węzłów tarcia, Wydawnictwo Naukowe Instytutu Technologii Eksploatacji – PIB, Radom 2011
211. Plesset M.S., The pulsation method for generating cavitation damage, Trans. ASME Journal of Basic Engineering 85 (1963) 360
212. Plesset M.S., Devine R.E., Effect of exposure time on cavitation damage, Trans. ASME Journal of Basic Engineering 88 (1966) 691
213. Pradhan, S.K.; Chakraborty, T.; Gupta, S.P. Sen; Suryanarayana, C.; Frefer, A.; Froes, F.H. X-ray powder profile analyses on nanostructured niobium metal powders Nanostructured Materials 5 (1995) 53
214. Precht W, Łunarska E, Czyżniewski A, Pancielejko M, Walkowiak W, Corrosion resistance, structure and mechanical properties of PVD TiCxN1-x coatings, Vacuum 47 (6-8) (1996) 867
215. Precht W., Czyżniewski A., Wytwarzanie i niektóre własciwości warstw nano-krystalicznych i nanokompozytowych typu XC/a-C:H dla zastosowań tribologicznych, 13th International Summer School Mielno’2002, Modern Plasma Surface technology, Koszalin 2002
216. Precht W., Czyżniewski A., Rylski A, Pancielejko A., Walkowiak W, Właściwości warstw TiCxN1-x nanoszonych na podłoża stalowe trzema metodami PVD, Materiały I Ogólnopolskiej Konferencji Naukowej Łódź `94 nt. Nowoczesne Technologie w Inżynierii Powierzchni, Łódź, wrzesień 1994, 191
217. Puchi-Cabrera E.S., Matinez F., Herrera I., Berrios J.A., Dixit S., Bhat D, On the fatigue behavior of an AISI 316 L stainless steel coated with a PVD TiN deposit. Surf. Coat. Technol. 182 (2004) 276
218. Qing X., Xingming G., The scale effect on the yield strength of nanocrystalline materials, International Journal of Solids and Structures 43 (2006) 7793
219. Qu R., Patankar R., Rao M.D., Stochastic modeling of fatigue crack propagation by collective motion of dislocations, International Journal of Fatigue 29 (2007) 181
220. Rebholz C., Ziegele H., Leyland A., Matthews A., Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering, Surf. Coat. Technol., 115 (1999) 222
221. Remington B. A., Bazan G., Belak J., Bringa E., Colvin J. D., Edwards M. J., Glendinning S. G., et. al., Materials science under extreme conditions of pressure and strain rate, Metallurgical and Materials Transactions A 35 (2004) 2587
222. Richman R.H., McNaughton W.P., 1990, Correlation of cavitation erosion behaviour with mechanical properties of metals, Wear 140 (1990) 63
223. Richtert M, Richtert J, Zastosowanie metody cyklicznego wyciskania ściskającego (CWS) do wytwarzania materiałów o niekonwencjonalnych własnościach – część II, Inżynieria Materiałowa 2 (2001) 73
224. Richtert M, Richtert J, Zasadziński J., Hawryłkiewicz S., Nanomateriały metaliczne kształtowane duzymi odkształceniami plastycznymi, Inżynieria Materiałowa 2 (2003) 59
225. Rickerby D.S., Burrnet P.J., The wear and erosion resistance of hard PVD coatings, Surf. Coat. Technol., 33, (1987) 191
226. Roco M.C., Bainbridge W.S., 2001, Societal Implications of Nanoscience and Nanotechnology, NSET Workshop report, http://www.wtec.org/nanoreports/nanosi.pdf
227. Rodak K., Wrożyna A., Wpływ intensywnego odkształcania plastycznego na kształtowanie struktury i właściwości stali austenitycznej, Inżynieria Materiałowa 6 (2009) 525
228. Rosner H., Markmann J., Weissmuller J., Deformation twinning in nanocrystalline Pd, Philosophical Magazine Letters 84 (2004) 321
229. Schijve J., Fatigue of structures and materials in the 20th century and the state of the art, International Journal of Fatigue 25 (2003) 679
230. Schiller S., Beister G., Reschke J., Hoetzsch G., TiN hard coatings deposited on high-speed steel substrate by reactive direct current magnetron sputtering, J. Vac. Sci. Technol. A, 5(4) (1987) 2180
231. Sencer B.H., Maloy S.A., Gray III G.T., The influence of shock pulse shape on the structure/property behaviour of copper and 316L austenitic stainless steel, Acta Materialia 53 (2005) 3293
232. Shiao M.-H., Kao S.-A., Shieu F.-S., Effects of processing parameters on microstructure and hardness of the arc ion-plated TiN on a type 304 stainless steel. Thin Solid Films 375 (2000) 163
233. Siegel R.W., Fougere G.E., Mechanical properties of nanophase metals, NanoStructured Materials, 6. (1995) 205
234. Sobczak J., Wybrane aspekty nanotechnologii i nanomateriałów, Kompozyty 3 (2003) 385
235. Sproul W.D., Rudnik P.J., Graham M.E., The effect of N2 partial pressure, deposition rate and substrate bias potential on the hardness and texture of reactively sputtered TiN coatings, Surf. Coat. Technol., 39-40 (1989) 355
236. Staśkiewicz J., Czyżniewski A., Warstwy azotku tytanu otrzymywane zmodyfikowaną metodą reaktywnego stałoprądowego rozpylania magnetronowego, Materiały Konferencji Naukowo-Technicznej „Techniki wytwarzania warstw powierzchniowych metali:, Rzeszów 1988, 99
237. Su Y.L., Yao S.H., Wei C.S., Kao W.H., Wu C.T., Influence of single- and multilayer TiN films on the axial tension and fatigue performance of AISI 1045 steel, Thin Solid Films 338 (1999) 177
238. Sundgren J.-E., Johansson B.-O., Karlsson S.E., Hetzel T.G., Mechanisms of reactive sputtering of titanium nitride and titanium carbide. II: Morphology and structure, Thin Solid Films 105 (1983) 367
239. Sundgren J.-E., Johansson B.-O., Karlsson S.E., Hetzel T.G., Mechanisms of reactive sputtering of titanium nitride and titanium carbide. III: Influence of substrate bias on composition and structure, Thin Solid Films, 105 (1983) 385
240. Suryanarayana C., Koch C.C., Nanocrystalline materials – Current research and future directions, Hyperfine Interactions 130 (2000) 5
241. Suslick K.S., Didenko Y., Fang M. M., Hyeon T., Kolbeck K. J., McNamaraIII W. B., Mdleleni M. M., Wong M., Acoustic cavitation and its chemical consequences. Phil. Trans. R. Soc. Lond. A 357 (1999) 335
242. Szlufarska, I.; Nakano, A.; Vashista, P., A crossover in the mechanical response of nanocrystalline ceramics, Science 309 (2005) 911
243. Tabor D., A theory of static and dynamic hardness. Engineering 165 (1948) 289
244. Tagarielli V.L., Fleck N.A., Colella A., Matteazzi P., Mechanical properties and deformation mechanisms of nanocrystalline Fe/Cu 60/40 composites, J Mater Sci 46 (2011) 385
245. Taniguchi, N.; On the Basic Concept of NanoTechnology, Proc. Intl. Conf. Prod. Eng. Tokyo, (Tokyo: Japan Society of Precision Engineering, 1974)
246. Tian L., Zhu X., Tang B., Pan J., He J., Microstruture and mechanical properties of Cr-N coatings by ion-beam-assisted magnetron sputtering, Mat Sci Eng A 483-484 (2008) 751
247. Tilbrook M. T., Paton D. J., Xie Z., Hoffman M., Microstructural effects on indentation failure mechanisms in TiN coatings: Finite element simulations, Acta Materialia 55 (2007) 2489
248. Tjong S.C., Chen H., Nanocrystalline materials and coatings, Mat Sci Eng R 45 (2004) 1
249. Travena D.H., Cavitation and tension in liquids. IOP Publishing Ltd 1987
250. Trapezon A. G., Lyashenko B. A. Effect of the deposition and thickness parameters of titanium nitride (TiN) coatings on the fatigue strength, Strength of Materials 42 (2010) 675
251. Tschopp M.A., McDowell D.L., Grain boundary dislocation sources in nanocrystalline copper, Scripta Materialia 58 (2008) 299
252. Valli J., Mäkelä U., Matthews A., Murawa V., TiN coatings adhesion studies using the scratch test method, J. Vac. Sci. Technol. A, 3(6) (1985) 2411
253. Valli J., Molarius J., Korhonen A.S., The effect of nitrogen content on the critical normal force in scratch testing of Ti-N films, Thin Solid Films, 154 (1987) 351
254. Van Swygenhoven H., Caro A., Farkas D., Grain boundary structure and its influence on plastic deformation of polycrystalline FCC metals at the nanoscale: a molecular dynamics study, Scripta mater. 44 (2001) 1513
255. Van Swygenhoven H., Derlet P. M., Frøseth A. G., Stacking fault energies and slip in nanocrystalline metals, Nature Materials 3 (2004) 399
256. Van Swygenhoven H., Spaczer M., Farkas D., Caro A., The role of grain size and the presence of low and high angle grain boundaries in the deformation mechanism of nanophase ni: a molecular dynamics computer simulation, NanoStru Mater 12 (1999) 323
257. Vershinin N., Filonov K., Straumal B., Gust W., Wiener I., Rabkin E., Kazakevich A., Corrosion behaviour of protective and decorative TiN coatings on large area steel strips, Surf. Coat. Technol. 125 (2000) 229
258. Voevodin A.A., Bantle R., Matthews A., Dynamic impact wear of TiCxNy and Ti-DLC composite coatings, Wear 185 (1995) 151
259. Vogel A., Lauterborn W., Timm R., Optical and acustic investigations of the dynamics of laser-producerd cavitation bubbles near a solid boundary, J.Fluid mech. 206 (1989) 299
260. Von Neumann J., Discussion – shape of metals grains, Metal Interfaces, ASM, Cleveland, Ohio, USA 1952, 108
261. Vyas B., Preece C.M., Stress produced in a solid by cavitation, Journal of Applied Physics 47 (1976) 5133
262. Wang N., Wang Z., Aust K.T., Erb U., Effect of grain size on mechanical properties of nanocrystalline materials, Acta Metallurgica et Materialia 43 (1995) 519
263. Warren H., Hunt Jr., Nanomaterials: Nomenclature, Novelty, and Necessity, JOM 56 (2004) 13
264. Wendorff Z., Kula P., Badanie zjawiska zachodzących w staliwie Hadfielda podczas odkształcania statycznego i dynamicznego, IX Konferencja Metaloznawcza Kraków 1977
265. Wiklund U., Hedenqvist P., Hogmark S., Multilayer cracking resistance in bending, Surf. Coat. Technol. 97 (1997) 773
266. Winning M., Stress-induced migration of tilt grain boundaries, Acta Mater. 58 (2008) 85
267. Winning M., Gottstein G., Shvindlerman L.S., Stress induced grain boundary motion, Acta Materialia 49 (2001) 211
268. Wnuk M.P., Podstawy mechaniki pękania, Wydawnictwo Naukowe AKAPIT, Kraków 2008
269. Wójs K., Kawitacja w cieczach o różnych właściwościach reologicznych. Oficyna Wydawnicza Politechniki Wrocławskiej 2004
270. Wood G.M., Knudsen L. K., Hammitt F.G., Cavitation damage studies with rotating disk in water, Trans. ASME Journal of Basic Engineering 89 (1967) 98
271. Wu X., Zhu Y.T., Chen M.W., Ma E., Twinning and stacking fault formation during tensile deformation of nanocrystalline Ni, Scripta Materialia 54 (2006) 1685
272. Wyrzykowski J.W., Wpływ właściwości granic ziarn na granicę plastyczności metali, Wyd. Politechniki Warszawskiej 1987
273. Wyrzykowski J.W., Pleszakow E., Sieniawski J., Odkształcanie i pękanie metali, WNT Warszawa 1999
274. Xiaojun Z., Procopiak L.A.J., Souza N.C., d’Oliveira A.S.C.M., Phase transformation during cavitation erosion of a Co stainless steel, Materials Science and Engineering A358 (2003) 199
275. Yakovleva T. Yu., Matokhnyuk L. E., Prediction of fatigue characteristics of metals at different loading frequencies, Strength of Mater. 36 (2004) 442
276. Ye D., Matsuoka S., Nagashima N., Suzuki N., The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel, Mat Sci Eng A 415 (2006) 104
277. Yoon S.Y., Yoon S.Y., Chung W.S., Kim K.H., Impact-wear behaviors of TiN and Ti–Al–N coatings on AISI D2 steel and WC–Co substrates, Surf. Coat. Technol.177–178 (2004) 645
278. Youssef K.M., Scattergood R.O., Murty K.L., Koch C.C., Nanocrystalline Al–Mg alloy with ultrahigh strength and good ductility, Scripta Materialia 54 (2006) 251
279. Zhang Q., Wang X., Huang, Fenglei Ch. L., Guo X., An experimental and numerical study of the dynamic response of a free–free aluminium beam under high velocity transverse impact, Int. J Impact Eng. 36 (2009) 1385
280. Zhang S., Duncan J. H., Chahine G.L., The final stage of the collapse of a cavitation bubble near a rigid wall, J Fluid Mech. 257 (1993) 147
281. Zhang X.H., Liu D.X., Tan H.B., Wang X.F., Effect of TiN/Ti composite coating and shot peening on fretting fatigue behaviour of TC17 alloy at 350 °C, Surf. Coat. Technol. 203 (2009) 2315
282. Zhang Y. S.; Han Z., Fretting wear behavior of nanocrystalline surface layer of pure copper under oil lubrication, Tribology Letters 27 (2007) 53
283. Zhang Y., Wang Z. Cui Y., The cavitation behavior of a metastable Cr–Mn–Ni steel, Wear 240 (2000) 231
284. Zhou J., Li Y., Zhu R., Zhang Z., The grain size and porosity dependent elastic moduli and yield strength of nanocrystalline ceramics. Mater. Sci. Eng. A 445–446 (2007) 717
285. Zhou J., Xu N., Zhu R., Zhang Zh., He T., Cheng L., A polycrystalline mechanical model for bulk nanocrystalline materials using the energy approach, J Mater Process Tech. 209 (2009) 5407
286. Zhou J., Zhu R., Zhang Z., A constitutive model for the mechanical behaviors of bcc and fcc nanocrystalline metals over a wide strain rate range. Mater. Sci. Eng.A 480 (2008) 419
287. Zhou Y., Erb U., Aust K.T., Palumbo G., The effects of triple junctions and grain boundaries on hardness and Young’s modulus in nanostructured Ni–P, Scripta Materialia 48 (2003) 825
288. Zhou Y.-K., Hammitt F.G., Cavitation erosion incubation period, Wear 86 (1983) 299
289. Zou D., Yan D., Xiao L., Dong Y., Characterization of nanostructured TiN coatings fabricated by reactive plasma spraying, Surf. Coat. Technol. 202 (2008) 1928
290. Krella A., Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period, Wear 258 (2005) 1723-1731
291. Krella A., The influence of TiN coatings properties on cavitation erosion resistance, Surface & Coatings Technology 204 (2009) 263–270
292. Krella A., Cavitation resistance of TiN nanocrystalline coatings with various thickness, Advances in Materials Science 9 (2009)12-24
293. Krella A., Degradacja powłok TiN w warunkach kawitacji, Inżynieria Materiałowa 4/160 (2009) 245-248
294. Krella A., 2010, Cavitation degradation model of hard thin PVD coatings, Advances in Materials Science 10 (2010) 27-36
295. Krella A., An experimental parameter of cavitation erosion resistance for TiN coatings, Wear 270 (2011) 252-257
296. Krella A., The new parameter to assess cavitation erosion resistance of hard PVD coatings, Engineering Failure Analysis 18 (2011) 855-867
297. Krella A., Mechanizmy odkształcenia nanostrukturalnych materiałów, Inżynieria Materiałowa 5/183 (2011) 844-850
298. Krella A., Czyżniewski A., Cavitation erosion resistance of Cr-N coating deposited on stainless steel. Wear 260 (2006) 1324-1332
299. Krella A., Czyżniewski A., Influence of the substrate hardness on the cavitation erosion resistance of TiN coating, Wear 263 (2007) 395-401
300. Krella A., Czyżniewski A., Wpływ osadzania nanostrukturalnych powłok na odporność kawitacyjną stali austenicznej X6CrNiTi18-10, Problemy Eksploatacji 4/2007; 167-174
301. Krella A., Czyżniewski A., Investigation concerning the cavitation resistance of TiN coatings deposited on stainless steel at various temperatures, Wear 265 (2008) 72-80
302. Krella A., Czyżniewski A. Cavitation erosion resistance of TiN coating deposited on stainless steel. Wear 265 (2008) 963-970
303. Krella A., Czyżniewski A., Cavitation resistance of Cr-N coatings deposited on austenitic stainless steel at various temperature, Wear 266 (2009) 800-809
304. Krella A., Steller J., Obciążenie kawitacyjne na stanowisku z szczelinowym wzbudnikiem kawitacji, Problemy Eksploatacji 76/1 (2010) 71-82
305. Steller J., Krella A., On fractional approach to assessment of material resistance to cavitation, Wear 263 (2007) 402-411

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-article-BWM1-0009-0004