Problems for determining the thermal conductivity of TBCs by laser-flash method

• Autorzy: Altun O. , Erhan Boke Y. , Kalemtas A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of this paper was to investigate the parameters which effect the results of determining the thermal conductivity of thermal barrier coatings (TBCs) by laser-flash method. Design/methodology/approach: The air plasma-spray (APS) technique was used to deposition of two- and three-layered samples. Two-layered samples were composed of metal substrate (321 stainless steel), and ceramic top coat (8YSZ). Three-layered samples were composed of metal substrate (321 stainless steel), bond coat (NiCrAlY) and top coat (8YSZ). Thermal diffusivity of each layer have been measured in the temperature range from room temperature (RT) to 900° C by laser-flash method. The thermal conductivity was calculated with respect to density, specific heat and diffusivity of the materials. Findings: Obtained results show that the specific heat, density and thicknesses of metal substrate, bond coat and top coat play important role in the thermal conductivity measurement. Research limitations/implications: To obtain the correct results in laser-flash technique thickness, density, and cp of the materials are needed to be measured accurately and surface smoothness of samples should be provided sensitively. Errors in these parameters cause high deviations in measurements. Practical implications: It has been aimed offer an insight into the experimental determination of thermal conductivity of layered TBC system which are used in high technologic applications. Originality/value: Laser-flash method is the most widely used experimental technique to determine the thermal conductivity of APS TBCs at high temperatures. The research contributes to better understanding and recognition the importance of sample preparation in laser-flash method.

Słowa kluczowe

EN

ceramics; thermal conductivity; TBC; laser-flash method

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 30, nr 2
• Strony: 115--120
• Opis fizyczny: Bibliogr. 23 poz., wykr.

Twórcy

autor

Altun O.

autor

Erhan Boke Y.

autor

Kalemtas A.

• Mechanical Engineering Deparment, Eskisehir Osmangazi University, Batimeselik, Eskisehir, Turkey,

Bibliografia

• [1] K. Kobylańska-Szkaradek,Thermal barrier ZrO2-Y2O3obtained by plasma spraying method and laser melting, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 77-80.
• [2] K. A. Khor, S. Jana, Pulse laser processing of plasma sprayed thermal barrier coating, Journal of Materials Processing Technology 66 (1996) 4-8.
• [3] M. Konter, M. Thumann, Materials and manufacturing of advanced industrial gas turbine components, Journal of Materials Processing Technology 92-117 (2001) 386-390.
• [4] J. F. Li, H. L. Liao, C. X. Ding, C. Coddet, Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments, Journal of Materials Processing Technology 160 (2005) 34-42.
• [5] L. Swadźba, G. Moskal, B. Mendala, T. Gancarczyk, Characterisation of air plasma sprayed TBC coating during isothermal oxidation at 1100 *C, Journal of Achievements in Materials and Manufacturing Engineering 21 (2007) 81-84.
• [6] G. Moskal, The porosity assessment of thermal barrier coatings obtained by APS method, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 483-486.
• [7] D. Stover, C. Funke, Directions of the development of thermal barrier coatings in energy applications, Journal of Materials Processing Technology 92-93 (1999) 195-202.
• [8] B. J. Filla, A Steady-state high-temperature apparatus for measuring thermal conductivity of ceramics, Review of Scientific Instruments 68-7 (1997) 2822-2829.
• [9] K. An, M. K Han., An experimental technique to evaluate the effective thermal conductivity of Y2O3 stabilized ZrO2coatings, Journal of Materials Science 41 (2006) 2113-2120.
• [10] A. J. Slifka, Thermal conductivity apparatus for steady-state, comparative measurement of ceramic coatings, Journal of Research of the National Institute of Standards and Technology 105 (2001) 591-605.
• [11] W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, 1961, Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity, Journal of Applied Physics 32 (1961) 1679-1684.
• [12] R. D. Cowan, Pulse method of measuring thermal diffusivity at high temperatures, Journal of Applied Physics 34 (1962) 926-927.
• [13] J. A. Cape, and G. W. Lehman, Temperature and finite pulse-time effects in the flash method for measuring thermal diffusivity, Journal of Applied Physics 34 (1963) 1909-1913.
• [14] T. A. Taylor, and R. E. Taylor, Testing of stability and thermal properties of thermal barrier coatings, ASM Handbook 5 (1999) 654-659.
• [15] M. Sorai, Comprehensive handbook of calorimetry and thermal analysis, John Wiley & Sons, Ltd, (2004) 172.
• [16] R. Brandt, L. Pawlowski, and G. Neuer, Specific heat and thermal conductivity of plasma sprayed yttria-stabilized zirconia and NiAl, NiCr, NiCrAl, NiCrAlY, NiCoCrAlY Coatings, High Temperatures -High Pressures 18 (1986) 65-77.
• [17] R. E. Taylor, Thermal conductivity determination of thermal barrier coatings, Materials Science and Engineering A245 (1998) 160-167.
• [18] F. Schmitz, D. Hehn, H. R. Mainer, Evaluation of laser-flash measurements by means of numerical solution of the heat conduction equation, High Temperature-High Pressures 31 (1998) 203-211.
• [19] W. Hohenauer, L. Vozár, An Estimation of thermophysical properties of layered materials by the laser-flash method, High Temperature-High Pressures 33 (2001) 17-25.
• [20] R. L. Mcmasters, R. B. Dinwiddie, A. Haji-Sheikh, Estimating the thermal conductivity of a film on a known substrate, Journal of Thermophysics and Heat Transfer 21-4 (2007) 681-687.
• [21] ASTM E1461, Standard test method for thermal diffusivity by the flash method, ASTM Standards, American Society for Testing and Materials-Philadelphia, 2002.
• [22] ASM Handbook, Properties and selection: irons, steels and high performance alloys 1, 1986.
• [23] R. E. Taylor, X. Wang, X. Xu, Thermophysical properties of thermal barrier coatings, Surface & Coatings Technology. 120-121 (1999) 89-95.