Experiment on high speed machining parametres for sport shoe sole mold making using aluminium alloy 5083, 6163 and 7075

• Autorzy: Chartakom S. , Butdee S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The objective of this experiment is to obtain the fine surface roughness that is required less final polishing process as well as shortest manufacturing lead time. Design/methodology/approach: the aluminum Alloy 5058, 6163 and 7075 are selected for the experiment on a high speed machine. The machine used for testing is namely Mold Maker 200&2500 which is the high precision machining center. Secondly, the study is emphasizes on the suitable cutting tool and cutting parameters. Accurate surface roughness measured level is an important factor for injection mold making. This section explains the process of surface roughness measurement on the machine, namely MarSurf XCR 20 V1.20-4. Findings: The investigations are shown that the Aluminum graded Al 6163 and Al 7075 can be suitably used for the sport sole mold making in or to obtain the acceptable surface roughness without polishing Practical implications: The method can be adapted for all global shapes of tools, even in the case of complex geometries Originality/value: The investigations are shown that the Aluminum Al 6163 and Al 7075 can extremely save machining and polishing time.

Słowa kluczowe

EN

high speed machining; sport shoe sole; aluminium 5058

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 31, nr 2
• Strony: 306--311
• Opis fizyczny: Bibliogr. 8 poz., wykr.

Twórcy

autor

Chartakom S.

autor

Butdee S.

• Mould Excellence Center, Department of Mechanical Technology, College of Industrial Technology,

Bibliografia

• [1] M. A. Ben, C. Mascle, M. Balazinski, Agility in High Speed Machining: Optimization Between Tool and Holder, Proceedings of the 6th International Conference ”Integrated Design and Manufacturing in Mechanical Engineering” IDMME 2006, Grenoble, France.
• [2] S. I. Chung, Y. G. Lm, K. L. Kim, H. D. Jeong, K. K. Cho, D. S. Jeong, D. K. Kim, Rapid Fabrication of Aluminum Shoe Mould Using Vacuum sealed Casting, CIRP Journal of Manufacturing Systems 33/3 (2004) 201-208.
• [3] R. V. Vallejos, C. P. Lima, G. Varvakis, Towards the Development of a Framework to Create a Virtual Organization Breeding Environment in the Mould and Die Sector, International Journal of Intelligent Manufatcuring 18 (2007) 587-597.
• [4] R. B. Da Silva, E. O. Ezugwu, J. Bonney, A. R. Machado, A. M. Reis, High Speed Turning of Ti-6Al-4V Alloy with Coated Carbides Tools in an Argon Enriched Environment, CIRP Journal of Manufacturing Systems 36 (2007) 13-19.
• [5] Y. Lu, Y. Takeuchi, I. Takahasi, K. Kase, M. Anzai, Fabrication of Ball End Mill of High Speed Milling and its Characterization, CIRP Journal of Manufacturing Systems 32/4 (2003) 287-291.
• [6] V. Gagnol, B. C. Bouzgarrou, P. Ray, C. Barra, Dynamic Analysis and Design Optimization of High Speed Spindle Bearing System, Proceedings of the 6th International Conference ”Integrated Design and Manufacturing in Mechanical Engineering” IDMME 2006, Grenoble, France.
• [7] S. B. Breton, G. Poulachon, F. Lapujoulade, Identification of Cutting Relations in High Speed Milling, Proceedings of the 6th International Conference ”Integrated Design and Manufacturing in Mechanical Engineering” IDMME 2006, Grenoble, France.
• [8] S. Lavernhe, C. Tournier, C. Lartique, Kinematical Performances in 5Axis Machining, Proceedings of the 6 International Conference ”Integrated Design and Manufacturing in Mechanical Engineering” IDMME 2006,Grenoble, France.