Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: Aim of work has been concentrated on investigation of nanocomposites, as promising engineering materials, basing on polymers and organo-modified silicates as nano fillers. Design/methodology/approach: Conventional injection molding process additionally equipped with external computer controlled manipulation system for inducing the shear rates. Findings: Evidently reinforced structures at 3 and 5 wt % of nano-clay content inside polymer matrix for different processing settings related to higher shearing time. Research limitations/implications: Application of nano platelet together with developed injection molding technique brought satisfying mechanical results and development of morphology in the shape of gradient composition. Practical implications: Reinforced nanocomposites are promising materials with high strength and stiffness and with low cost of raw materials (97 wt% of polypropylene and 3 wt% of 2:1 phyllosilicate). Originality/value: Wide application of polymer nanocomposites as materials with ameliorates properties render them high potential materials.
Wydawca
Rocznik
Tom
Strony
212--217
Opis fizyczny
Bibliogr. 18 poz., wykr.
Twórcy
autor
autor
autor
autor
- Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland, leszek.dobrzanski@polsl.pl
Bibliografia
- [1] M. Saiu, V. Brucato, S. Piccarolo, G. Titomanlio, Injection molding of iPP, International Polymer Processing VII:3 (1992) 267-273.
- [2] Z. Mencik, D. R. Fitchmun, Morphology of injection-molded polypropylene, Journal of Polymer Science: Polymer Physics Edition, 11 (1973) 951-973.
- [3] J. C. Viana, N. Billon, A. M. Cunha, The Thermomechanical Environment and the Mechanical Properties of Injection Moldings, Polymer Engineering and Science 44:8 (2003) 1522-1533.
- [4] L. Mandelkern, Crystallization of Polymers, Second Edition, Kinetics and Mechanisms, Volume 2, Cambridge University Press, 2003.
- [5] G. Strobl, The Physics of Polymers, Springer, Berlin, 1997.
- [6] M. Bilewicz, J. C. Viana, A. M. Cunha, L. A. Dobrzański, Polymer composite strengthening by developed injection moulding technique, Archives of Materials Science and Engineering 30/2 (2008) 69-72.
- [7] M. Bilewicz, J. C. Viana, A. M. Cunha, L. A. Dobrzański, Morphology diversity and mechanical response of injection moulded polymer composites and polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering 15 (2006) 159-165.
- [8] D. B. Tchalamov, J. C. Viana, A. M. Cunha, Mechanical Properties of Two Component Injection Molded Parts, SPE ANTEC 2002 San Francisco, CA, USA.
- [9] P. Postawa, D. Kwiatkowski, E. Bociaga, Influence of the method of heating/cooling moulds on the properties of injection moulding parts, Archives of Materials Science and Engineering 31/2 (2008) 121-124.
- [10] T. Jaruga, E. Bociąga, Crystallinity of parts from multicavity injection mould, Archives of Materials Science and Engineering 30/1 (2008) 53-56.
- [11] M. Fujiyama, Polypropylene structure, blends and composites: structure and morphology, Chapman and Hall, London, 1995.
- [12] L. S. Turng, T. A. Oswald, T.Turng, P. Gramann, Injection Molding Handbook, Hanser, Munich, 2002.
- [13] L. A. Utracki, M. M. Dumoulin, P. Toma, Melt rheology of high density polyethylene/polyamide-6 blends, Polymer Engineering and Science 26/1 (2004) 34-44.
- [14] M. Bilewicz, J. C. Viana, A. M. Cunha, Non-conventional injection moulding of a PP/PC-ABS blend, Materials Science Forum 514-516 (2006) 858-862.
- [15] D. V. Rosato, D. V. Rosato, M. G. Rosato, Injection molding handbook 3rd edition, Kluwer Academic Publishers, 2000.
- [16] E. P. Giannelis, Polymer Layered Silicate Nanocomposites, Advanced Materials 8 (1996) 29-35.
- [17] T. D. Fornes, P. J. Yoon, D. L. Hunter, H. Keskkula, D. R. Paul, Effect of organoclay structure on nylon-6 nanocomposite morphology and properties, Polymer 43 (2002) 5915-33.
- [18] S. S. Ray, M. Okamoto, Polymer/layered silicate nanocomposites: a review from preparation to processing, Progress in Polymer Science 28 (2003) 1539-1641.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWAW-0002-0007