Determination of the temperature distribution in the wet cylinder sleeve in turbo diesel engine

• Autorzy: Gustof P. , Hornik A.
• Języki publikacji: PL

Abstrakty

EN

Purpose: The determination of the temperature distribution in the wet cylinder sleeve in initial phase of the work of turbo Diesel engine. Design/methodology/approach: The results of calculations of the temperature distribution in the wet cylinder sleeve of the turbo Diesel engine were received by means of the two - zone combustion model and the finite element method. Findings: The computations presented the possibility of use of the mathematical models of the combustion processes and the heat transfer on individual surfaces of the wet cylinder sleeve used by the variable values of the boundary conditions and temperature of the working medium in initial time of the work engine. Research limitations/implications: The modeling of the heat loads was executed for analysis of the values and temperature distribution in the wet cylinder sleeve in initial phase of the work of turbo Diesel engine until the moment of achievement quasi stabilized temperature values. Originality/value: The results of numeric calculations of the heat loads of the wet cylinder sleeve displayed the possibility of the use of the original two-zone combustion model and finite elements method to analysis of values and temporary temperature distribution on individual surfaces of the cylinder.

Słowa kluczowe

PL

techniki numeryczne; obciążenie cieplne wilgotnej tuleji cylidrowej; FEM

EN

numerical techniques; heat loads of the wet cylinder sleeve; FEM

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 27, nr 2
• Strony: 159--162
• Opis fizyczny: Bibliogr. 16 poz., wykr.

Twórcy

autor

Gustof P.

autor

Hornik A.

• Department of Vehicle Service, Faculty of Transport, Silesian University of Technology, ul. Krasińskiego 8, 40-019 Katowice, Poland,

Bibliografia

• [1] P. Gustof, Calculations of temperature for all cycle of work in the cylinder of turbo diesel engine, Scientific Journal of Silesian Technical University, Series: Transport 43 (2001) 5-11 (in Polish).
• [2] S. Kwaśniowski, Z. Sroka, W. Zabłocki, Modelling of the heat loads in elements of combustion engines, Publishing house of Wroclaw Technical University, Wroclaw 1999 (in Polish).
• [3] A. Ambrozik, Classification of empirical dependences determined coefficient surface film conductance in the combustion, Piston engine, Publishing house of school and pedagogical, Warsaw 1987 (in Polish).
• [4] S. Wiśniewski, The heat loads of piston engines, Publishing house of Transport and Communication, Warsaw 1972 (in Polish).
• [5] S. Wiśniewski, Heat exchange, Scientific Publishing house, Warsaw 1988 (in Polish).
• [6] E. Rusiński, Finite element method, Cosmos/M System, Publishing house of Transport and Communication, Warsaw 1994 (in Polish).
• [7] E. Rusinski, J. Czmochowski, P. Moczko, Numerical and experimental analysis of a mine’s loader boom crack, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 273-276.
• [8] E. Rusinski, J. Czmochowski, P. Moczko, Failure reasons investigations of dumping conveyor breakdown, Journal of Achievements in Materials and Manufacturing Engineering 23/1 (2007) 75-78.
• [9] L. A. Dobrzański, Engineering materials and material design. Principles of materials science and physical metallurgy, WNT, Warsaw 2006 (in Polish).
• [10] K. Raznjevic, Thermal boards with graphs, Publishing houses Technical-Scientifically, Warsaw 1966 (in Polish).
• [11] Multi-author work, Steels characteristics, Alloy constructional steels, Toughening steels, Publishing house of Silesia, Katowice 1975 (in Polish).
• [12] K. Parczewski, J. Wencelis, Comparison of ignition engine valves of various constraction, Archive of Motorization 2 (2005) 89-104 (in Polish).
• [13] J. Jaskólski, G. Budzik, The heat loads of the piston of the combustion engine, Publishing house of Rzeszow Technical University, Monograph (2004) 1-128 (in Polish).
• [14] J. Jaskólski, G. Budzik, Stationary heat flow in the piston of the combustion engine, Monograph 290, Series: Mechanics, Krakow 2003 (in Polish).
• [15] P. Gustof, A. Hornik, Modelling of the heat loads of the valves in turbo Diesel engine and the accuracy of calculations, Journal of Achievements in Materials and Manufacturing Engineering 23/2 (2007) 59-62.
• [16] P. Gustof, A. Hornik, D. Jędrusik, Modelling of the heat load in the piston of turbo Diesel engine, Scientific Journal of Silesian Technical University, Series: Transport 63 (2007) 5-11 (in Polish).