Stereometry specification of anodization surface of casting aluminium alloys

• Autorzy: Konieczny J. , Labisz K. , Wieczorek J. , Dobrzański L.
• Języki publikacji: PL

Abstrakty

EN

Purpose: The aim of the work is presents the influence of casting method and anodic treatment parameters on properties of an anodic layer formed on aluminum casting alloys. Design/methodology/approach: Investigations were carried out on the laser profile measurement gauge MicroProf from company FRT on two casting aluminum alloys which both were founding by pressure die casting and gravity casting. Findings: The researches included analyze of the influence of chemical composition, geometry and roughness of anodic layer obtained on aluminum casts. Research limitations/implications: Contributes to research on anodic layer for aluminum casting alloys. Practical implications: Conducted investigations lay out the areas of later researches, especially in the direction of the possible, next optimization anodization process of aluminum casting alloys, e.g. in the range of raising resistance on corrosion. Originality/value: The range of possible applications increases for example as materials on working building constructions, elements in electronics and construction parts in air and motorization industry in the aggressive environment.

Słowa kluczowe

PL

właściwości mechaniczne; metalografia; komputerowa nauka o materiałach; obróbka powierzchniowa

EN

mechanical properties; metallography; computational material science; surface treatment

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 27, nr 2
• Strony: 143--146
• Opis fizyczny: Bibliogr. 16 poz., wykr.

Twórcy

autor

Konieczny J.

autor

Labisz K.

autor

Wieczorek J.

autor

Dobrzański L.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] T. Haga, H. Sakaguchi, H. Inui, H. Watari, S. Kumai, Aluminum alloy semisolid strip casting using an unequal diameter twin roll caster, Journal of Achievements in Materials and Manufacturing Engineering 14 (2006) 157-162.
• [2] J. Myalski, J. Wieczorek, A. Dolata-Grosz, Tribological properties of heterophase composites with an aluminum matrix, Journal of Achievements in Materials and Manufacturing Engineering 15 (2006) 53-55.
• [3] M. H. Robert, D. Delbin, Production of cellular A2011 alloy from semi-solid state, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 137-140.
• [4] M. Wierzbińska, J. Sieniawski, Effect of morphology of eutectic silicon crystals on mechanical properties and cleavage fracture toughness of AlSi5Cu1 alloy, Journal of Achievements in Materials and Manufacturing Engineering 14 (2006) 31-36.
• [5] M. Kciuk, The structure, mechanical properties and corrosion resistance of aluminum AlMg1Si1 alloy, Journal of Achievements in Materials and Manufacturing Engineering 16 (2006) 51-56.
• [6] A. W. Brace, The Technology of Anodizing Aluminium, third ed, Interall Srl, Modena, Italy, 2000.
• [7] K. P. Han, J. L. Fang, Decorative-protective coatings on aluminium, Surface and Coathings Technology 88 (1996) 178-182.
• [8] H. Konno, K. Utaka, R. Furuichi, Two step of anodizing process of aluminium as a means of improving the chemical and physical properties of oxide films, Corrosion Science 38/12 (1996) 2247-2256.
• [9] M. Maejima, K. Saruwatari, M. Takaya, Friction behaviour of anodic oxide film on aluminum impregnated with molybdenum sulfide compounds, Surface and Coatings Technology 132 (2000) 105-110.
• [10] I. Vrublevsky, V. Parkoun, V. Sokol, J. Schreckenbach, Study of chemical dissolution of the barrier oxide layer of porous alumina films formed in oxalic acid using a re-anodizing technique, Applied Surface Science 236 (2004) 270–277.
• [11] J. Konieczny, L. A. Dobrzański, K. Labisz, J. Duszczyk, The influence of cast method and anodizing parameters on structure and layer thickness of aluminum alloys, Journal of Materials Processing Technology 157–158 (2004) 718-723.
• [12] L. E. Fratila-Apachitei, J. Duszczyk, L. Katgerman, AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature using different current waveforms, Surface and Coatings Technology 165 (2003) 232-240.
• [13] L. E. Tichelaar, F. D. Thompson, G. E. Terryn, H. Skeldon, J. Duszczyk, A transmission electron microscopy study of hard anodic oxide layers on AlSi(Cu) alloys, Electrochim. Acta 49 (2004) 3169.
• [14] I. Vrublevsky, V. Parkoun, J. Schreckenbach, G. Marx, Effect of the current density on the volume expansion of the deposited thin films of aluminum during porous oxide formation, Applied Surface Science 220 (2003) 51.
• [15] I. Vrublevsky, V. Parkoun, V. Sokol, J. Schreckenbach, G. Marx, The study of the volume expansion of aluminum during porous oxide formation at galvanostatic regime, Applied Surface Science 222 (2004) 21-25.
• [16] L. E. Fratila-Apachitei, J. Duszczyk, L. Katgerman, Voltage transients and morphology of AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature, Surface and Coatings Technology 157 (2002) 80-94.