Structure and properties of Mg-Zrand Mg-Si alloys

• Autorzy: Čížek L. , Pawlica L. , Kocich R. , Janošec M. , Tański T. , Praźmowski M.
• Języki publikacji: PL

Abstrakty

EN

Purpose of this paper is to extend a complex evaluation of magnesium alloys which requires very often knowledge of structure and mechanical properties. These properties are connected with microstructure that is influenced by metallurgical and technological factors and conditions of exploitation. Presented knowledge expresses very important information for design and exploitation of these alloys. Design/methodology/approach: The methods of the light microscopy for metallographic and analyses of alloys were used. Findings: Objective of this work consisted in determination of structure and mechanical properties progressive magnesium alloys. Research limitations/implications: Knowledge of alloys structure characteristics will be determined new research direction of scope. Practical implications: The results may be utilized for a relation between structure and properties of the investigated material in process of manufacturing. Originality/value: These results contribute to complex evaluation of properties magnesium alloys namely for explanation of structure developed new magnesium alloys. The results of this paper are determined for research workers deal by development new exploitations of magnesium alloys.

Słowa kluczowe

PL

stopy metaliczne; mikroskopia metalograficzna

EN

metallic alloys; magnesium alloys; structure; light metallographic microscopy

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 27, nr 2
• Strony: 127--130
• Opis fizyczny: Bibliogr. 15 poz., wykr.

Twórcy

autor

Čížek L.

autor

Pawlica L.

autor

Kocich R.

autor

Janošec M.

autor

Tański T.

autor

Praźmowski M.

• VŠB-Technical University of Ostrava, 17.listopadu 15, 708 33 Ostrava, Czech Republic,

Bibliografia

• [1] J. R Davis, Metals Handbook, Desk. Edition, Second Edition, ASM International, The Materials Information Society, USA, 1998, 560- 564.
• [2] ASM Specialty Handbook. Magnesium and Magnesium Alloys, ed. Avedesian, ASM International, The Materials Information Society, USA 1999.
• [3] H. Friedrich, S. Schumann, Research for a New age of magnesium in the automotive industry, Journal of Materials Processing Technology 117 (2001) 276-281.
• [4] H. Baker, Physical properties of magnesium and magnesium alloys, The Dow Chemical Company, Midland 1997.
• [5] K. U. Kainer, Magnesium-Alloys and Technology, Wiley-VH, Weinheim, Germany, 2003.
• [6] A. Kiełbus, Structure and mechanical properties of casting MSR-B magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 131-134.
• [7] B. L. Mordike, T. Ebert, Magnesium. Properties-applications-potential, Journal of Materials Processing Technology 117 (2001) 37-45.
• [8] X. Ming-Xu, Z. Hong-Xing, Y. Sen, L. Jian-Guo, Recrysta-llization of preformed AZ91D magnesium alloys in the semisolid state, Materials and Design 26 (2005) 343-349.
• [9] L. A. Dobrzański, T. Tański, L. Čížek, Z. Brytan, Structure and properties of the magnesium casting alloys, Journal of Materials Processing Technology 192-193 (2007) 567-574.
• [10] T. Rzychoń, A. Kiełbus, The influence of wall thickness on the microstructure of HPDC AE44 alloy, Archives of Materials Science and Engineering 28/8 (2007) 471-474.
• [11] M. Greger, R. Kocich, L. Čížek, L. A. Dobrzański, I. Juřička, Possibilities of mechanical properties and microstructure improvement of magnesium alloys, Archives of Materials Science and Engineering 28/2 (2007) 83-90.
• [12] A. Kiełbus, T. Rzychoń, R. Cibis, Microstructure of AM50 die casting magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 135-138.
• [13] T. Rzychoń, A. Kiełbus, Microstructure of WE43 casting magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering 21/2 (2007) 31-34.
• [14] L. Čížek, M. Greger, L Pavlica, L. A. Dobrzański, T. Tański,Study of selected properties of magnesium alloy AZ91 after heat treatment and forming. Journal of Materials Processing Technology 157-158 (2004) 466-471.
• [15] J. Drápala, L. Kuchař, K. Tomášek, Z. Trojanová: Hořčík, jeho slitiny a binární systémy hořčík -příměs [Magnesium, its alloys and binary systems magnesium-admixture], VŠB-TU, Ostrava 2004.